相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of position of heat transfer fluid tube on the melting of phase change material in cylindrical thermal energy storage
Ramalingam Senthil
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2022)
Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system
Jasim M. Mahdi et al.
APPLIED ENERGY (2020)
Thermal performance evaluation of non-uniform fin array in a finned double-pipe latent heat storage system
Amin Shahsavar et al.
ENERGY (2020)
Natural convection flow of a suspension containing nano-encapsulated phase change particles in an eccentric annulus
S. A. M. Mehryan et al.
JOURNAL OF ENERGY STORAGE (2020)
Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle
Mohammad Mahdi Heyhat et al.
JOURNAL OF ENERGY STORAGE (2020)
Acceleration of discharge process of clean energy storage unit with insertion of porous foam considering nanoparticle enhanced paraffin
M. Sheikholeslami et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Enhancement of PCM solidification using inorganic nanoparticles and an external magnetic field with application in energy storage systems
M. Sheikholeslami et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Numerical study on latent thermal energy storage systems with aluminum foam in local thermal equilibrium
Bernardo Buonomo et al.
APPLIED THERMAL ENGINEERING (2019)
Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source
Pouyan Talebizadeh Sardari et al.
ENERGY (2019)
Thermal performance of copper foam/paraffin composite phase change material
Huanpei Zheng et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Fe3O4-Ethylene glycol nanofluid forced convection inside a porous enclosure in existence of Coulomb force
M. Sheikholeslami et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Comparison of past projections of global and regional primary and final energy consumption with historical data
Luisa F. Cabeza et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Effect of natural convection on melting performance of eccentric horizontal shell and tube latent heat storage unit
Xiaoling Cao et al.
SUSTAINABLE CITIES AND SOCIETY (2018)
Effects of PCM arrangement and natural convection on charging and discharging performance of shell-and-tube LHS unit
Y. B. Tao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Experimental investigation on the heat transfer performance of a PCM based pin fin heat sink with discrete heating
R. Srikanth et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)
Convection heat transfer in micropolar nanofluids with oxide nanoparticles in water, kerosene and engine oil
Abid Hussanan et al.
JOURNAL OF MOLECULAR LIQUIDS (2017)
A review on thermophysical properties of nanofluids and heat transfer applications
Munish Gupta et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Heat transfer study of phase change materials with graphene nano particle for thermal energy storage
Karunesh Kant et al.
SOLAR ENERGY (2017)
Enhancing the scalability of selected inversion factorization algorithms in genomic prediction
Fabio Verbosio et al.
JOURNAL OF COMPUTATIONAL SCIENCE (2017)
Investigation on the thermal performance of a high-temperature latent heat storage system
Zhao Ma et al.
APPLIED THERMAL ENGINEERING (2017)
Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination
Jasim M. Mahdi et al.
APPLIED ENERGY (2017)
Effect of inclination angle on the performance of a shell and tube heat storage unit - An experimental study
N. Kousha et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental study on enhancement of thermal energy storage with phase-change material
Jialin Yang et al.
APPLIED ENERGY (2016)
Energy and exergy analyses of medium temperature latent heat thermal storage with high porosity metal matrix
Ashish Kumar et al.
APPLIED THERMAL ENGINEERING (2016)
Solidification of a PCM with nanoparticles in triplex-tube thermal energy storage system
Jasim M. Mahdi et al.
APPLIED THERMAL ENGINEERING (2016)
On the effective thermal conductivity of aluminum metal foams: Review and improvement of the available empirical and analytical models
Paola Ranut
APPLIED THERMAL ENGINEERING (2016)
Effect of porosity of conducting matrix on a phase change energy storage device
Aditya Atal et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Flow and Heat Transfer in Micro Pin Fin Heat Sinks With Nano-Encapsulated Phase Change Materials
Bahram Rajabifar et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2016)
Layer pattern thermal design and optimization for multistream plate-fin heat exchangers-A review
Zhe Wang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Performance comparison of a group of thermal conductivity enhancement methodology in phase change material for thermal storage application
Carlos R. Abujas et al.
RENEWABLE ENERGY (2016)
Numerical simulation study on discharging process of the direct-contact phase change energy storage system
Weilong Wang et al.
APPLIED ENERGY (2015)
Maximization of performance of a PCM latent heat storage system with innovative fins
A. Sciacovelli et al.
APPLIED ENERGY (2015)
A parametric investigation of a PCM-based pin fin heat sink
R. Pakrouh et al.
MECHANICAL SCIENCES (2015)
Analysis of geometrical and operational parameters of PCM in a fin and tube heat exchanger
M. Rahimi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)
Experimental study of the phase change heat transfer inside a horizontal cylindrical latent heat energy storage system
Chang Liu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2014)
Preparation and thermal characterization of paraffin/metal foam composite phase change material
X. Xiao et al.
APPLIED ENERGY (2013)
Achieving better energy-efficient air conditioning - A review of technologies and strategies
K. J. Chua et al.
APPLIED ENERGY (2013)
Thermal optimization of PCM based pin fin heat sinks: An experimental study
Rajesh Baby et al.
APPLIED THERMAL ENGINEERING (2013)
Solidification of nano-enhanced phase change material (NEPCM) in a wavy cavity
S. Kashani et al.
HEAT AND MASS TRANSFER (2012)
Experimental investigations on melting of lead in a cuboid with constant heat flux boundary condition using thermal neutron radiography
Lokendra Kumar et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2012)
A combined BDF-semismooth Newton approach for time-dependent Bingham flow
J. C. De Los Reyes et al.
NUMERICAL METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS (2012)
Determinants of carbon dioxide emissions: Empirical evidence from 69 countries
Susan Sunila Sharma
APPLIED ENERGY (2011)
Numerical simulation on phase-change thermal storage/release in a plate-fin unit
Wei-Biao Ye et al.
APPLIED THERMAL ENGINEERING (2011)
Heat transfer correlations for PCM-based heat sinks with plate fins
S. K. Saha et al.
APPLIED THERMAL ENGINEERING (2010)
Convective transport in nanofluids
J Buongiorno
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2006)
Numerical study for enhancing the thermal conductivity of phase change material (PCM) storage using high thermal conductivity porous matrix
O Mesalhy et al.
ENERGY CONVERSION AND MANAGEMENT (2005)
Solving unsymmetric sparse systems of linear equations with PARDISO
O Schenk et al.
FUTURE GENERATION COMPUTER SYSTEMS-THE INTERNATIONAL JOURNAL OF ESCIENCE (2004)