相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Microstructure and Strength of Ultrasonic Plus Resistance Spot Welded Aluminum Alloy to Coated Press Hardened Boron Steel
Ying Lu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
First principle calculations and mechanical properties of the intermetallic compounds in a laser welded steel/aluminum joint
Yulong Li et al.
OPTICS AND LASER TECHNOLOGY (2020)
Optimal design for dual laser beam butt welding process parameter using artificial neural networks and genetic algorithm for SUS316L austenitic stainless steel
Bowen Liu et al.
OPTICS AND LASER TECHNOLOGY (2020)
Optimization of laser welding of DP780 to Al5052 joints for weld width and lap-shear force using response surface methodology
Guiqian Liu et al.
OPTICS AND LASER TECHNOLOGY (2020)
Investigations on Surface Roughness and Tool Wear Characteristics in Micro-Turning of Ti-6Al-4V Alloy
Kubilay Aslantas et al.
MATERIALS (2020)
Gas tungsten arc lap welding of aluminum/steel hybrid structures
Abbas Hasanniah et al.
MARINE STRUCTURES (2019)
Optimizing the pulse wave mode low power fibre laser welding parameters of 22Mnb5 boron steel using response surface methodology
K. I. Yaakob et al.
MEASUREMENT (2019)
Review of Aluminum-To-Steel Welding Technologies for Car-Body Applications
Alessio Gullino et al.
METALS (2019)
Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels
J. P. Oliveira et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Modeling of machining parameters affecting flank wear and surface roughness in hot turning of Monel-400 using response surface methodology (RSM)
Asit Kumar Parida et al.
MEASUREMENT (2019)
Effect of steel to aluminum laser welding parameters on mechanical properties of weld beads
Guan Qianqian et al.
OPTICS AND LASER TECHNOLOGY (2019)
Influence of Al-Si coating on resistance spot welding of Mg to 22MnB5 boron steel
Kaiping Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Material flow and mechanical properties of aluminum-to-steel self-riveting friction stir lap joints
Yongxian Huang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Microstructures and Mechanical Properties of Plasma Arc Welded Joints of Ultra-high Strength Steel and Aluminum Alloy Using Al-Si and Al-Cu Fillers
Wenhua Geng et al.
ISIJ INTERNATIONAL (2018)
Dissimilar gas tungsten arc weld-brazing of Al/steel using Al-Si filler metal: Microstructure and strengthening mechanisms
M. Pouranvari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Experimental investigations and empirical modeling for optimization of surface roughness and machining time parameters in micro end milling using Genetic Algorithm
S. P. Leo Kumar
MEASUREMENT (2018)
Microstructural and mechanical evolution of Al/steel interface with Fe2Al5 growth in resistance spot welding of aluminum to steel
Nannan Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Studies on the influence of process parameters on the AISI 316L resistance spot-welded specimens
T. Jagadeesha et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions
Mohd Danish et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Microstructure and mechanical properties of the heat-affected zone in laser-welded/brazed steel 22MnB5-AA6016 aluminum/AZ31 magnesium alloy
M. Windmann et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Laser welding of steel to aluminium: Thermal modelling and joint strength analysis
Sonia Meco et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Optimization of hybrid laser-TIG welding of 316LN stainless steel using genetic algorithm
N. Chandrasekhar et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Optimizing the ultrasonic inserting parameters to achieve maximum pull - Out strength using response surface methodology and genetic algorithm integration technique
K. Anand et al.
MEASUREMENT (2017)
Refill friction stir spot welding of dissimilar aluminum alloy and AlSi coated steel
Y. Ding et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Fiber laser butt joining of aluminum to steel using welding-brazing method
Junhao Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Laser welding dissimilar materials of aluminum to steel: an overview
Pengfei Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Microstructure and mechanical properties of resistance-spot-welded joints for A5052 aluminum alloy and DP 600 steel
Jianbin Chen et al.
MATERIALS CHARACTERIZATION (2016)
Validation of a method using Taguchi, response surface, neural network, and genetic algorithm
Mei-Ling Huang et al.
MEASUREMENT (2016)
Fusion zone microstructure evolution of fiber laser welded press-hardened steels
Dulal Chandra Saha et al.
SCRIPTA MATERIALIA (2016)
Microstructure and lap shear strength of the weld interface in ultrasonic welding of Al alloy to stainless steel
Hiromichi T. Fujii et al.
SCRIPTA MATERIALIA (2016)
Role of zinc layer in resistance spot welding of aluminium to steel
M. R. Arghavani et al.
MATERIALS & DESIGN (2016)
Laser beam welding of aluminum to Al-base coated high-strength steel 22MnB5
M. Windmann et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Joining Al 5052 alloy to aluminized steel sheet using cold metal transfer process
Minjung Kang et al.
MATERIALS & DESIGN (2015)
Parameters optimization of laser brazing in crimping butt using Taguchi and BPNN-GA
Youmin Rong et al.
OPTICS AND LASERS IN ENGINEERING (2015)
Review of Research Progress on Aluminum-Steel Dissimilar Welding
L. H. Shah et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Optimizing the friction welding parameters to attain maximum tensile strength in AISI 1035 grade carbon steel rods
S. T. Selvamani et al.
MEASUREMENT (2014)
Effects of electrode force on microstructure and mechanical behavior of the resistance spot welded DP600 joint
D. W. Zhao et al.
MATERIALS & DESIGN (2013)
Welding of aluminum alloy to zinc coated steel by cold metal transfer
Shanglu Yang et al.
MATERIALS & DESIGN (2013)
Influence of aluminum coating and diffusion affecting additives on dissimilar laser joining of steel and aluminum
J. P. Bergmann et al.
LASERS IN MANUFACTURING (LIM 2013) (2013)
The influences of nugget diameter on the mechanical properties and the failure mode of resistance spot-welded metastable austenitic stainless steel
Wei Liu et al.
MATERIALS & DESIGN (2012)
Influence of fusion zone size and failure mode on mechanical performance of dissimilar resistance spot welds of AISI 1008 low carbon steel and DP600 advanced high strength steel
M. Pouranvari et al.
MATERIALS & DESIGN (2011)
Microstructural evolution of intermetallic layer in hot-dipped aluminide mild steel with silicon addition
Wei-Jen Cheng et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process
H. T. Zhang et al.
MATERIALS CHARACTERIZATION (2007)
分享论文
