相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Synergistic enhancement in the sensing performance of a mixed-potential NH3 sensor using SnO2@CuFe2O4 sensing electrode
Aman Bhardwaj et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Surface decorated spinel-oxide electrodes for mixed-potential ammonia sensor: Performance and DRT analysis
Aman Bhardwaj et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Influence of sintering temperature on the physical, electrochemical and sensing properties of α-Fe2O3-SnO2 nanocomposite sensing electrode for a mixed-potential type NOx sensor
Aman Bhardwaj et al.
CERAMICS INTERNATIONAL (2019)
Highly selective and stable mixed-potential type gas sensor based on stabilized zirconia and Cd2V2O7 sensing electrode for NH3 detection
Fangmeng Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Effects of electronic probe's architecture on the sensing performance of mixed-potential based NOx sensor
Aman Bhardwaj et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Transition metal oxide (Ni, Co, Fe)-tin oxide nanocomposite sensing electrodes for a mixed-potential based NO2 sensor
Aman Bhardwaj et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Effects of CeVO4 electrode morphology and oxygen content on ammonia sensing properties for potentiometric sensor
Chao Wang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Enhancing NH3 sensing performance of mixed potential type sensors by chemical exsolution of Ag nanoparticle on AgNbO3 sensing electrode
Xu Li et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Sensing Performance of a YSZ-Based Electrochemical NO2 Sensor Using Nanocomposite Electrodes
Young-Sung Yoo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)
Novel NiWO4 nanoberries morphology effect on photoelectrochemical properties
Eadi Sunil Babu et al.
MATERIALS LETTERS (2018)
Enhanced selective performance of mixed potential ammonia gas sensor by Au nanoparticles decorated CeVO4 sensing electrode
Ling Wang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
A review on various after treatment techniques to reduce NOx emissions in a CI engine
V. Praveena et al.
JOURNAL OF THE ENERGY INSTITUTE (2018)
Effect of the Heterogeneous Catalytic Activity of Electrodes for Mixed Potential Sensors
Thomas Ritter et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Stabilized zirconia-based mixed potential type sensors utilizing MnNb2O6 sensing electrode for detection of low-concentration SO2
Fangmeng Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
Fabrication of well-ordered porous array mounted with goldnanoparticles and enhanced sensing properties for mixed potential-type zirconia-based NH3 sensor
Bin Wang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
Effects of CoFe2O4 electrode microstructure on the sensing properties for mixed potential NH3 sensor
Yu Yuan et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
NiO/NiWO4 Composite Yolk-Shell Spheres with Nanoscale NiO Outer Layer for Ultrasensitive and Selective Detection of Subppm-level p-Xylene
Tae-Hyung Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Recent advances in the selective catalytic reduction of NOx with NH3 on Cu-Chabazite catalysts
Jihui Wang et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2017)
A novel mixed potential NH3 sensor based on TiO2@WO3 core-shell composite sensing electrode
Weiwei Meng et al.
ELECTROCHIMICA ACTA (2016)
Effect of V2O5-content on electrode catalytic layer morphology and mixed potential ammonia sensor performance
Chao Wang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
Mixed potential NH3 sensor based on Mg-doped lanthanum silicate oxyapatite
Lei Dai et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
Sensing mechanism of the zirconia-based highly selective NO sensor by using a plate-like Cr2O3 sensing electrode
Han Jin et al.
SENSORS AND ACTUATORS B-CHEMICAL (2015)
Novel Synthesis of Cobalt Nickel Tungstate Nanopowders and its Photocatalytic Application
Said M. El-Sheikh et al.
JOURNAL OF CLUSTER SCIENCE (2015)
Understanding the surface and structural characteristics of tungsten oxide supported on tin oxide catalysts for the conversion of glycerol
M. Srinivas et al.
JOURNAL OF CHEMICAL SCIENCES (2015)
A review of mixed-potential type zirconia-based gas sensors
Norio Miura et al.
IONICS (2014)
Bayesian decoding of the ammonia response of a zirconia-based mixed-potential sensor in the presence of hydrocarbon interference
Julia Tsitron et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Mixed-Potential Type Zirconia-Based NH3 Sensor Using SnO2-Disk Sensing-Electrode Attached with Sputtered Au
Tomoaki Sato et al.
ECS ELECTROCHEMISTRY LETTERS (2014)
Structural and optical characterization of metal tungstates (MWO4; M=Ni, Ba, Bi) synthesized by a sucrose-templated method
Siti Murni M. Zawawi et al.
CHEMISTRY CENTRAL JOURNAL (2013)
Temperature dependence of NO2 sensitivity of YSZ-based mixed potential type sensor attached with NiO sensing electrode
Kamaraj Mahendraprabhu et al.
IONICS (2013)
Half-Cell Potential Analysis of an Ammonia Sensor with the Electrochemical Cell Au | YSZ | Au, V2O5-WO3-TiO2
Daniela Schoenauer-Kamin et al.
SENSORS (2013)
Effects of WOx modification on the activity, adsorption and redox properties of CeO2 catalyst for NOx reduction with ammonia
Ziran Ma et al.
JOURNAL OF ENVIRONMENTAL SCIENCES (2012)
Spontaneous gradual accumulation of hexagonally-aligned nano-silica on gold nanoparticles embedded in stabilized zirconia: a pathway from catalytic to NH3-sensing performance
Vladimir V. Plashnitsa et al.
NANOSCALE (2011)
Effects of Calcination Temperature and Acid-Base Properties on Mixed Potential Ammonia Sensors Modified by Metal Oxides
Atsushi Satsuma et al.
SENSORS (2011)
The effect of La2CuO4 sensing electrode thickness on a potentiometric NOx sensor response
Eric R. Macam et al.
SENSORS AND ACTUATORS B-CHEMICAL (2011)
Investigation of the electrode effects in mixed potential type ammonia exhaust gas sensors
Daniela Schoenauer et al.
SOLID STATE IONICS (2011)
Proton-Conducting Thin Film Grown on Yttria-Stabilized Zirconia Surface for Ammonia Gas Sensing Technologies
Shinya Teranishi et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2009)
Selective mixed potential ammonia exhaust gas sensor
Daniela Schoenauer et al.
SENSORS AND ACTUATORS B-CHEMICAL (2009)
Stabilized zirconia-based sensor attached with NiO/Au sensing electrode aiming for highly selective detection of ammonia in automobile exhausts
Perumal Elumalai et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Effect of surface acidic oxides of activated carbon on adsorption of ammonia
Chen-Chia Huang et al.
JOURNAL OF HAZARDOUS MATERIALS (2008)
Molten salt synthesis of barium molybdate and tungstate microcrystals
P. Afanasiev
MATERIALS LETTERS (2007)
Influence of adsorption and catalytic reaction on sensing properties of a potentiometric La2CuO4/YSZ/Pt sensor yy
Jiho Yoo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Estimation of electronegativity values of elements in different valence states
Keyan Li et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2006)
Thermodynamic evaluation of phase equilibria in NaNO3-KNO3 system
XJ Zhang et al.
JOURNAL OF PHASE EQUILIBRIA (2003)
NH3 interaction with catalytically modified nano-WO3 powders for gas sensing applications
I Jiménez et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Mixed potential sensors using lanthanum manganate and terbium yttrium zirconium oxide electrodes
EL Brosha et al.
SENSORS AND ACTUATORS B-CHEMICAL (2002)
Solid-stale mixed potential gas sensors: theory. experiments and challenges
FH Garzon et al.
SOLID STATE IONICS (2000)
A mixed-potential sensor based on a Ce0.8Gd0.2O1.9 electrolyte and platinum and gold electrodes
R Mukundan et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)