相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Quality assurance in metal powder bed fusion via deep-learning-based image classification
Maximilian Hugo Kunkel et al.
RAPID PROTOTYPING JOURNAL (2020)
A deep neural network for classification of melt-pool images in metal additive manufacturing
Ohyung Kwon et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
Distributed Temperature Control in Laser-Based Manufacturing
Chengjian Zheng et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2020)
Real-Time Observation of Melt Pool in Selective Laser Melting: Spatial, Temporal, and Wavelength Resolution Criteria
Luca Mazzoleni et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)
Non-destructive quality control methods in additive manufacturing: a survey
Paschalis Charalampous et al.
RAPID PROTOTYPING JOURNAL (2020)
Powder-Bed Fusion Process Monitoring by Machine Vision With Hybrid Convolutional Neural Networks
Yingjie Zhang et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2020)
Adaptive wavelet compression of large additive manufacturing experimental and simulation datasets
Maher Salloum et al.
COMPUTATIONAL MECHANICS (2019)
Online quality inspection using Bayesian classification in powder-bed additive manufacturing from high-resolution visual camera images
Masoumeh Aminzadeh et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes
Mojtaba Khanzadeh et al.
IISE TRANSACTIONS (2019)
In Situ Additive Manufacturing Process Monitoring With an Acoustic Technique: Clustering Performance Evaluation Using K-Means Algorithm
Hossein Taheri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Robust multivariable predictive control for laser-aided powder deposition processes
Xiaoqing Cao et al.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2019)
Machine learning-based image processing for on-line defect recognition in additive manufacturing
Alessandra Caggiano et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
From in-situ monitoring toward high-throughput process control: cost-driven decision-making framework for laser-based additive manufacturing
Ruholla Jafari-Marandi et al.
JOURNAL OF MANUFACTURING SYSTEMS (2019)
Geometrical metrology for metal additive manufacturing
R. K. Leach et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
The effect of primary processing parameters on surface roughness in laser powder bed additive manufacturing
Bo Whip et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Layer-Wise Modeling and Anomaly Detection for Laser-Based Additive Manufacturing
Seyyed Hadi Seifi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Applying Neural-Network-Based Machine Learning to Additive Manufacturing: Current Applications, Challenges, and Future Perspectives
Xinbo Qi et al.
ENGINEERING (2019)
Deep Learning for In Situ and Real-Time Quality Monitoring in Additive Manufacturing Using Acoustic Emission
Sergey A. Shevchik et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)
Deep Learning of Variant Geometry in Layerwise Imaging Profiles for Additive Manufacturing Quality Control
Farhad Imani et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Toward Feedback Control for Additive Manufacturing Processes Via Enriched Analytical Solutions
John C. Steuben et al.
JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING (2019)
Layerwise Anomaly Detection in Laser Powder-Bed Fusion Metal Additive Manufacturing
Mohamad Mahmoudi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
In Situ Quality Monitoring in AM Using Acoustic Emission: A Reinforcement Learning Approach
K. Wasmer et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Convolutional neural network-based inspection of metal additive manufacturing parts
Binbin Zhang et al.
RAPID PROTOTYPING JOURNAL (2019)
A Framework for Optimizing Process Parameters in Powder Bed Fusion (PBF) Process Using Artificial Neural Network (ANN)
Mallikharjun Marrey et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
In situ measurement of part geometries in layer images from laser beam melting processes
Joschka zur Jacobsmuehlen et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Deep Learning for Distortion Prediction in Laser-Based Additive Manufacturing using Big Data
Jack Francis et al.
MANUFACTURING LETTERS (2019)
Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review
Ehsan Malekipour et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel
Gustavo Tapia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Fluid and particle dynamics in laser powder bed fusion
P. Bidare et al.
ACTA MATERIALIA (2018)
Defect detection in selective laser melting technology by acoustic signals with deep belief networks
Dongsen Ye et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Multifractal Analysis of Image Profiles for the Characterization and Detection of Defects in Additive Manufacturing
Bing Yao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Sensor-Based Build Condition Monitoring in Laser Powder Bed Fusion Additive Manufacturing Process Using a Spectral Graph Theoretic Approach
Mohammad Montazeri et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Process Mapping and In-Process Monitoring of Porosity in Laser Powder Bed Fusion Using Layerwise Optical Imaging
Farhad Imani et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Porosity prediction: Supervised-learning of thermal history for direct laser deposition
Mojtaba Khanzadeh et al.
JOURNAL OF MANUFACTURING SYSTEMS (2018)
Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting
Tomasz Kurzynowski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
In situ monitoring of selective laser melting of zinc powder via infrared imaging of the process plume
M. Grasso et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2018)
In Situ 3D Monitoring of Geometric Signatures in the Powder-Bed-Fusion Additive Manufacturing Process via Vision Sensing Methods
Zhongwei Li et al.
SENSORS (2018)
Laser Direct Metal Deposition of 2024 Al Alloy: Trace Geometry Prediction via Machine Learning
Fabrizia Caiazzo et al.
MATERIALS (2018)
In situ measurements of layer roughness during laser powder bed fusion additive manufacturing using low coherence scanning interferometry
Philip J. DePond et al.
MATERIALS & DESIGN (2018)
Process optimization and mechanical property evolution of AlSiMg0.75 by selective laser melting
Yuchao Bai et al.
MATERIALS & DESIGN (2018)
Extraction and evaluation of melt pool, plume and spatter information for powder-bed fusion AM process monitoring
Yingjie Zhang et al.
MATERIALS & DESIGN (2018)
In situ monitoring of selective laser melting using plume and spatter signatures by deep belief networks
Dongsen Ye et al.
ISA TRANSACTIONS (2018)
In-situ Acoustic Signature Monitoring in Additive Manufacturing Processes
Lucas W. Koester et al.
44TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 37 (2018)
Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring
Q. Y. Lu et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Defects monitoring of laser metal deposition using acoustic emission sensor
Haythem Gaja et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Influence of scan strategy and process parameters on microstructure and its optimization in additively manufactured nickel alloy 625 via laser powder bed fusion
Yigit M. Arisoy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
A review on measurement science needs for real-time control of additive manufacturing metal powder bed fusion processes
Mahesh Mani et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2017)
In-Process Monitoring of Selective Laser Melting: Spatial Detection of Defects Via Image Data Analysis
Marco Grasso et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Wavelet analysis of light emission signals in laser beam welding
Farzad Vakili-Farahani et al.
JOURNAL OF LASER APPLICATIONS (2017)
An Extended Lumped-Parameter Model of Melt-Pool Geometry to Predict Part Height for Directed Energy Deposition
Jianyi Li et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Marco Grasso et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
Acoustic emission monitoring of crack propagation in additively manufactured and conventional titanium components
Maria Strantza et al.
MECHANICS RESEARCH COMMUNICATIONS (2017)
Process Monitoring and Inspection Systems in Metal Additive Manufacturing: Status and Applications
Zhong Yang Chua et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
Spatter formation in selective laser melting process using multi-laser technology
Mohsen Taheri Andani et al.
MATERIALS & DESIGN (2017)
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
Cang Zhao et al.
SCIENTIFIC REPORTS (2017)
Laser based additive manufacturing in industry and academia
Michael Schmidt et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Defect Formation Mechanisms in Selective Laser Melting: A Review
Bi Zhang et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)
Real-time control of microstructure in laser additive manufacturing
Mohammad H. Farshidianfar et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
In situ morphology-based defect detection of selective laser melting through inline coherent imaging
Jordan A. Kanko et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Spatially resolved acoustic spectroscopy for selective laser melting
Richard J. Smith et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Parametric analysis of SLM using comprehensive optical monitoring
Maria Doubenskaia et al.
RAPID PROTOTYPING JOURNAL (2016)
Study on shrinkage behaviour of laser sintered PA 3200GF specimens using RSM and ANN
Sushant Negi et al.
RAPID PROTOTYPING JOURNAL (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
In-process sensing in selective laser melting (SLM) additive manufacturing
Thomas G. Spears et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
Multiple Sensor Detection of Process Phenomena in Laser Powder Bed Fusion
Brandon Lane et al.
THERMOSENSE: THERMAL INFRARED APPLICATIONS XXXVIII (2016)
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Christian Weingarten et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
A survey of sensing and control systems for machine and process monitoring of directed-energy, metal-based additive manufacturing
Edward W. Reutzel et al.
RAPID PROTOTYPING JOURNAL (2015)
Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder
Yang Liu et al.
MATERIALS & DESIGN (2015)
Process Monitoring of Additive Manufacturing by Using Optical Tomography
Guenter Zenzinger et al.
41ST ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 34 (2015)
Ultrasonic Online Monitoring of Additive Manufacturing Processes Based on Selective Laser Melting
Hans Rieder et al.
41ST ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 34 (2015)
In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system
S. Clijsters et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Selective laser melting of Ti6Al4V alloy for biomedical applications: Temperature monitoring and microstructural evolution
I. Yadroitsev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
Damien Buchbinder et al.
JOURNAL OF LASER APPLICATIONS (2014)
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Gustavo Tapia et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Investigation of laser consolidation process for metal powder by two-color pyrometer and high-speed video camera
Tatsuaki Furumoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Investigation of plasma spectra during selective laser micro sintering Cu-based metal powder
Dai Cheng et al.
RAPID PROTOTYPING JOURNAL (2013)
New strategies for powder compaction in powder-based rapid prototyping techniques
A. Budding et al.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)
Control of melt pool temperature and deposition height during direct metal deposition process
Lijun Song et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Balling behavior of stainless steel and nickel powder during selective laser melting process
Ruidi Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Effect of selective laser melting layout on the quality of stainless steel parts
S. Dadbakhsh et al.
RAPID PROTOTYPING JOURNAL (2012)
Detection of process failures in Layerwise Laser Melting with optical process monitoring
Tom Craeghs et al.
LASER ASSISTED NET SHAPE ENGINEERING 7 (LANE 2012) (2012)
Feedback Control of Melt Pool Temperature During Laser Cladding Process
Lijun Song et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY (2011)
Spectral Property Investigation of Air Plasma Generated by Pulsed CO2 Laser
Jian Tang et al.
IEEE TRANSACTIONS ON PLASMA SCIENCE (2011)
Layer-to-Layer Height Control for Laser Metal Deposition Process
Lie Tang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring
Tom Craeghs et al.
OPTICS AND LASERS IN ENGINEERING (2011)
In situ monitoring the pulse CO2 laser interaction with 316-L stainless steel using acoustical signals and plasma analysis
M. E. Khosroshahi et al.
APPLIED SURFACE SCIENCE (2010)
Plasma Plume Oscillations Monitoring during Laser Welding of Stainless Steel by Discrete Wavelet Transform Application
Teresa Sibillano et al.
SENSORS (2010)
Optimizing process parameters for selective laser sintering based on neural network and genetic algorithm
Wang Rong-Ji et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Kamran Mumtaz et al.
RAPID PROTOTYPING JOURNAL (2009)
Geometry control of the deposited layer in a nonplanar laser cladding process using a variable structure controller
Alireza Fathi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Melt pool temperature control using LabVIEW in Nd:YAG laser blown powder cladding process
D. Salehi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
A performance evaluation of local descriptors
K Mikolajczyk et al.
IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2005)
Microstructure and texture evolution during solidification processing of Ti-6Al-4V
PA Kobryn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Sensing, modeling and control for laser-based additive manufacturing
DM Hu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
A study on shrinkage compensation of the SLS process by using the Taguchi method
HJ Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Color image segmentation: advances and prospects
HD Cheng et al.
PATTERN RECOGNITION (2001)
分享论文
