相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。On the expansion of a circular hole in an orthotropic elastoplastic thin sheet
Jinjin Ha et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Plasticity and ductile fracture modeling of an Al-Si-Mg die-cast alloy
Madhav Baral et al.
INTERNATIONAL JOURNAL OF FRACTURE (2019)
Experimental study of continuous-bending-under-tension of AA6022-T4
Timothy J. Roemer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Ductile fracture of an aluminum sheet under proportional loading
Jinjin Ha et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Over five-times improved elongation-to-fracture of dual-phase 1180 steel by continuous-bending-under-tension
Camille M. Poulin et al.
MATERIALS & DESIGN (2019)
Plastic deformation of commercially-pure titanium: experiments and modeling
Madhav Baral et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Stress-state and strain-rate dependent ductile fracture of dual and complex phase steel
Borja Erice et al.
MECHANICS OF MATERIALS (2018)
Plastic anisotropy and ductile fracture of bake-hardened AA6013 aluminum sheet
Jinjin Ha et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Earing in cup-drawing of anisotropic Al-6022-T4 sheets
Haobin Tian et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Anisotropic ductile fracture criterion based on linear transformation
Yanshan Lou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals
Yanshan Lou et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Multiaxial Deformation Apparatus for Testing of Microtubes Under Combined Axial-Force and Internal-Pressure
P. W. Ripley et al.
EXPERIMENTAL MECHANICS (2016)
On fracture loci of ductile materials under non-proportional loading
Nithin Thomas et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Ductile fracture experiments with locally proportional loading histories
Christian C. Roth et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Modeling the ductile damage process in commercially pure titanium
Jinyuan Zhai et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Ductile failure of aluminum alloy tubes under combined torsion and tension
Martin Scales et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Residual Ductility and Microstructural Evolution in Continuous-Bending-under-Tension of AA-6022-T4
Milovan Zecevic et al.
MATERIALS (2016)
Anisotropic Hosford-Coulomb fracture initiation model: Theory and application
Gongyao Gu et al.
ENGINEERING FRACTURE MECHANICS (2015)
Stress state dependence of ductile damage and fracture behavior: Experiments and numerical simulations
Michael Bruenig et al.
ENGINEERING FRACTURE MECHANICS (2015)
Anisotropy of thin-walled tubes by a new method of combined tension and shear loading
Christopher P. Dick et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Effect of compression-tension loading reversal on the strain to fracture of dual phase steel sheets
Stephane J. Marcadet et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Ductile fracture of aluminum 2024-T351 under proportional and non-proportional multi-axial loading: Bao-Wierzbicki results revisited
Jessica Papasidero et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Micromechanically-motivated phenomenological Hosford-Coulomb model for predicting ductile fracture initiation at low stress triaxialities
Dirk Mohr et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
On the path-dependence of the fracture locus in ductile materials: Experiments
Shamik Basu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
FE simulation of edge fracture considering pre-damage from blanking process
Kai Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Strength and ductility evaluation of cold-welded seams in aluminum tubes extruded through porthole dies
Christopher P. Dick et al.
MATERIALS & DESIGN (2015)
Determination of the fraction of plastic work converted into heat in metals
Paul Knysh et al.
MECHANICS OF MATERIALS (2015)
Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality
Yanshan Lou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Effect of strain rate on ductile fracture initiation in advanced high strength steel sheets: Experiments and modeling
Christian C. Roth et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Mechanics and full-field deformation study of the Ring Hoop Tension Test
Chris P. Dick et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)
Ductile failure behavior of polycrystalline Al 6061-T6 under shear dominant loading
A. Ghahremaninezhad et al.
INTERNATIONAL JOURNAL OF FRACTURE (2013)
Anisotropic failure modes of high-strength aluminium alloy under various stress states
M. Fourmeau et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Predicting ductile fracture of low carbon steel sheets: Stress-based versus mixed stress/strain-based Mohr-Coulomb model
Fabien Ebnoether et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Ductile failure under combined shear and tension
S. S. Haltom et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Ductility of 304 stainless steel under pulsed uniaxial loading
Graham W. Cullen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Ductile failure behavior of polycrystalline Al 6061-T6
A. Ghahremaninezhad et al.
INTERNATIONAL JOURNAL OF FRACTURE (2012)
Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading - Part II: Ductile fracture
Meng Luo et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
On the path-dependence of the fracture locus in ductile materials - Analysis
A. A. Benzerga et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals
Yanshan Lou et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Numerical Analyses of Stress-triaxiality-dependent Inelastic Deformation Behavior of Aluminum Alloys
Michael Bruenig et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2011)
On the plastic anisotropy of an aluminium alloy and its influence on constrained multiaxial flow
M. Fourmeau et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Ductile failure in polycrystalline OFHC copper
A. Ghahremaninezhad et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Analytical yield criterion for an anisotropic material containing spherical voids and exhibiting tension-compression asymmetry
Joel B. Stewart et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Partially coupled anisotropic fracture model for aluminum sheets
Allison M. Beese et al.
ENGINEERING FRACTURE MECHANICS (2010)
Interaction between anisotropic plastic deformation and damage evolution in Al 2198 sheet metal
D. Steglich et al.
ENGINEERING FRACTURE MECHANICS (2010)
Hybrid experimental-numerical analysis of basic ductile fracture experiments for sheet metals
Matthieu Dunand et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
On the localization and failure in aluminum shells due to crushing induced bending and tension
T. Giagmouris et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Numerical failure analysis of a stretch-bending test on dual-phase steel sheets using a phenomenological fracture model
Meng Luo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Constitutive Modeling and Rupture Predictions of Al-6061-T6 Tubes Under Biaxial Loading Paths
Y. P. Korkolis et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2010)
Path-dependent failure of inflated aluminum tubes
Yannis P. Korkolis et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Inflation and burst of aluminum tubes. Part II: An advanced yield function including deformation-induced anisotropy
Yannis P. Korkolis et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Inflation and burst of anisotropic aluminum tubes for hydroforming applications
Yannis P. Korkolis et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
A new model of metal plasticity and fracture with pressure and Lode dependence
Yuanli Bai et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Calibration of stress-triaxiality dependent crack formation criteria: A new hybrid experimental-numerical method
D. Mohr et al.
EXPERIMENTAL MECHANICS (2007)
Non-quadratic anisotropic potentials based on linear transformation of plastic strain rate
Daeyong Kim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function
JW Yoon et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure
T Kuwabara et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Linear transfomation-based anisotropic yield functions
F Barlat et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
On fracture locus in the equivalent strain and stress triaxiality space
YB Bao et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)
Plane stress yield function for aluminum alloy sheets - part 1: theory
F Barlat et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
Micromechanics of coalescence in ductile fracture
AA Benzerga
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
An extended model for void growth and coalescence
T Pardoen et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
A micromechanical approach of damage in viscoplastic materials by evolution in size, shape and distribution of voids
M Garajeu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2000)
分享论文
