相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Solar Trees: First Large-Scale Demonstration of Fully Solution Coated, Semitransparent, Flexible Organic Photovoltaic Modules
Stephane Berny et al.
ADVANCED SCIENCE (2016)
Highly efficient, large area, roll coated flexible and rigid OPV modules with geometric fill factors up to 98.5% processed with commercially available materials
L. Lucera et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Efficient organic solar cells processed from hydrocarbon solvents
Jingbo Zhao et al.
NATURE ENERGY (2016)
Determination of Solvent Systems for Blade Coating Thin Film Photovoltaics
Jeffrey G. Tait et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells
Kyeongil Hwang et al.
ADVANCED MATERIALS (2015)
In Situ Characterization of Polymer-Fullerene Bilayer Stability
Deborah Leman et al.
MACROMOLECULES (2015)
Enhanced crystalline morphology of a ladder-type polymer bulk-heterojunction device by blade-coating
Jong H. Kim et al.
NANOSCALE (2015)
Efficient inverted polymer solar cells employing favourable molecular orientation
Varun Vohra et al.
NATURE PHOTONICS (2015)
Single-junction polymer solar cells with high efficiency and photovoltage
Zhicai He et al.
NATURE PHOTONICS (2015)
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Woon Seok Yang et al.
SCIENCE (2015)
Polymer Solar Cells with Efficiency >10% Enabled via a Facile Solution-Processed Al-Doped ZnO Electron Transporting Layer
Lethy Krishnan Jagadamma et al.
ADVANCED ENERGY MATERIALS (2015)
Charge-Carrier Mobility Requirements for Bulk Heterojunction Solar Cells with High Fill Factor and External Quantum Efficiency >90%
Jonathan A. Bartelt et al.
ADVANCED ENERGY MATERIALS (2015)
High-Performance Fully Printable Perovskite Solar Cells via Blade-Coating Technique under the Ambient Condition
Zhibin Yang et al.
ADVANCED ENERGY MATERIALS (2015)
Influence of Processing Parameters and Molecular Weight on the Morphology and Properties of High-Performance PffBT4T-2OD:PC71BM Organic Solar Cells
Wei Ma et al.
ADVANCED ENERGY MATERIALS (2015)
The interplay between structure, processing, and properties in organic photovoltaic devices: how to translate recent laboratory-scale developments to modules
Caroline Grand et al.
MRS COMMUNICATIONS (2015)
Real-time X-ray scattering studies of film evolution in high performing small-molecule-fullerene organic solar cells
Sebastian Engmann et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Development of Lab-to-Fab Production Equipment Across Several Length Scales for Printed Energy Technologies, Including Solar Cells
Markus Hoesel et al.
ENERGY TECHNOLOGY (2015)
Guidelines for Closing the Efficiency Gap between Hero Solar Cells and Roll-To-Roll Printed Modules
Luca Lucera et al.
ENERGY TECHNOLOGY (2015)
Importance of Domain Purity and Molecular Packing in Efficient Solution-Processed Small-Molecule Solar Cells
Subhrangsu Mukherjee et al.
ADVANCED MATERIALS (2015)
3D Printer Based Slot-Die Coater as a Lab-to-Fab Translation Tool for Solution-Processed Solar Cells
Doojin Vak et al.
ADVANCED ENERGY MATERIALS (2015)
In Situ Morphology Studies of the Mechanism for Solution Additive Effects on the Formation of Bulk Heterojunction Films
Lee J. Richter et al.
ADVANCED ENERGY MATERIALS (2015)
Phase Separation in Bulk Heterojunctions of Semiconducting Polymers and Fullerenes for Photovoltaics
Neil D. Treat et al.
ANNUAL REVIEW OF PHYSICAL CHEMISTRY, VOL 65 (2014)
Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules
Thomas R. Andersen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Approaching disorder-free transport in high-mobility conjugated polymers
Deepak Venkateshvaran et al.
NATURE (2014)
The influence of molecular orientation on organic bulk heterojunction solar cells
John R. Tumbleston et al.
NATURE PHOTONICS (2014)
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
Yuhang Liu et al.
NATURE COMMUNICATIONS (2014)
In situ monitoring of structure formation in the active layer of polymer solar cells during roll-to-roll coating
Lea H. Rossander et al.
AIP ADVANCES (2014)
Efficient inverted bulk-heterojunction solar cells from low-temperature processing of amorphous ZnO buffer layers
Lethy Krishnan Jagadamma et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
In situ UV-visible absorption during spin-coating of organic semiconductors: a new probe for organic electronics and
Maged Abdelsamie et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Fluorinated Polymer Yields High Organic Solar Cell Performance for a Wide Range of Morphologies
John R. Tumbleston et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Life cycle analyses of organic photovoltaics: a review
Sebastien Lizin et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules
Dechan Angmo et al.
ORGANIC ELECTRONICS (2013)
The case for organic photovoltaics
Seth B. Darling et al.
RSC ADVANCES (2013)
The Impact of Molecular Orientation on the Photovoltaic Properties of a Phthalocyanine/Fullerene Heterojunction
Barry P. Rand et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale
Jonathan Rivnay et al.
CHEMICAL REVIEWS (2012)
Nanoscale structure measurements for polymer-fullerene photovoltaics
Dean M. DeLongchamp et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Nika: software for two-dimensional data reduction
Jan Ilavsky
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2012)
Polarized X-ray scattering reveals non-crystalline orientational ordering in organic films
B. A. Collins et al.
NATURE MATERIALS (2012)
Roll-to-roll fabrication of polymer solar cells
Roar Sondergaard et al.
MATERIALS TODAY (2012)
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
Zhicai He et al.
NATURE PHOTONICS (2012)
High performance organic photovoltaic cells with blade-coated active layers
Siew-Lay Lim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Inverted Polymer Solar Cells Integrated with a Low-Temperature-Annealed Sol-Gel-Derived ZnO Film as an Electron Transport Layer
Yanming Sun et al.
ADVANCED MATERIALS (2011)
Correlating the scattered intensities of P3HT and PCBM to the current densities of polymer solar cells
Enrique D. Gomez et al.
CHEMICAL COMMUNICATIONS (2011)
Hierarchical Nanomorphologies Promote Exciton Dissociation in Polymer/Fullerene Bulk Heterojunction Solar Cells
Wei Chen et al.
NANO LETTERS (2011)
In Situ X-Ray Study of Drying-Temperature Influence on the Structural Evolution of Bulk-Heterojunction Polymer-Fullerene Solar Cells Processed by Doctor-Blading
Monamie Sanyal et al.
ADVANCED ENERGY MATERIALS (2011)
Effects of active layer thickness and thermal annealing on polythiophene: Fullerene bulk heterojunction photovoltaic devices
Lichang Zeng et al.
APPLIED PHYSICS LETTERS (2010)
Three-Dimensional Nanoscale Organization of Bulk Heterojunction Polymer Solar Cells
Svetlana S. van Bavel et al.
NANO LETTERS (2009)
Three minimum wet thickness regions of slot die coating
Yu-Rong Chang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2007)
Generating thickness gradients of thin polymer films via flow coating
CM Stafford et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2006)
Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology
WL Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Evaluation of thermocapillary driving forces in the development of striations during the spin coating process
DE Haas et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Characterization of the effects of soft X-ray irradiation on polymers
T Coffey et al.
JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2002)
分享论文
