Thermoelectric performance study on a heat pipe thermoelectric generator for micro nuclear reactor application

Heat pipe cooled reactor is designed to meet the future energy demands with many unique advantages such as modularization, solid and static state, high reliability and passive safety. In the innovative nuclear reactor design, heat pipes are used to cool the reactor core and transfer the fission heat passively, thermoelectric generators (TEGs) are utilized to achieve static energy conversion. In this article, a finite element model is established to investigate the detailed TEG thermoelectric performance coupled with heat pipes. A temperature field and flow field coupling model is used to simulate the heat transfer performance of the potassium heat pipe including a heat pipe wall, wick and vapor region. A heat pipe TEG experimental setup is established and the steady-state experiment is conducted. The experimental setup is selected as the numerical simulation object and the simulated results are compared with the experimental data to verify the numerical model. The maximum simulation error is within 5%. Based on the verification and validation, the steady-state thermoelectric performances, the effect of contact thermal resistance and external load on the skutterudite TEG thermoelectric performances are investigated. The detailed heat flux distributions, temperature distributions and potential distributions are researched in the steady-state simulation. The temperature distributions of the TEG cross section are centrally symmetrical and the horizontal temperature difference is 26 degrees C. The temperature difference introduced by thermal resistance at the TEG hot side increases from 33 degrees C to 94 degrees C with the increasing heat flux through TEG module. The influence of thermal resistance on TEG hot side is more significant than that on TEG cold side. The effect of external load on TEG output characteristics is investigated under different heat flux conditions. With the increase of heat flux from 60 to 166 kW/m(2), the temperature difference of TEG module and p-n unit increase by 432 degrees C and 348 degrees C, the thermoelectric conversion efficiency is improved from 3.6% to 8.5%, and output power increases by 20 W, respectively. The research results are of guiding significance for exploring the application potential of TEGs in the static heat pipe cooled reactor. This work provides research foundations for the multiphysics coupling analysis of the micro heat pipe cooled reactor.

Automated summary

The heat pipe cooled reactor is designed to meet future energy demands with advantages such as modularity, solid state, high reliability, and passive safety. In this study, a finite element model is established to investigate the thermoelectric performance of the TEG coupled with heat pipes, and experimental validation is conducted to verify the numerical model accuracy, with a maximum simulation error within 5%. The research provides insights into the application potential of TEGs in static heat pipe cooled reactors and lays foundations for multiphysics coupling analysis of micro heat pipe cooled reactors.