相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Feasibility of SiAlON-Si3N4 composite ceramic as a potential bone repairing material
Liguo Zhang et al.
CERAMICS INTERNATIONAL (2020)
Joining of SiO2f/SiO2 composite to Nb using Ag-Cu-In-Ti brazing alloys
Bo Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Advanced ceramic components: Materials, fabrication, and applications
Tunmise Ayode Otitoju et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)
Numerical simulation of residual stresses in aluminum alloy welded joints
Yaohui Lu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Microstructure and formation mechanism of Cf/SiC and Nb joint brazed with laminated amorphous Ti-Zr-Cu-Ni/crystalline Ti composite filler
Yan Sun et al.
VACUUM (2020)
Ultrasonic welding of magnesium alloys: a review
Felice Rubino et al.
MATERIALS AND MANUFACTURING PROCESSES (2020)
Investigation on microstructure and properties of laser solid formed low expansion Invar 36 alloy
Hua Tan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Microstructure evolution and mechanical properties of laser metal deposition of Invar 36 alloy
Hang Li et al.
OPTICS AND LASER TECHNOLOGY (2020)
Fabrication and luminous properties of phosphor ceramic for application in automotive laser headlight
Seok Bin Kwon et al.
CURRENT APPLIED PHYSICS (2020)
A design method of tensile triangles and low transformation temperature weld metal for reduction of stress concentration and residual stress of welded joints
Zhongyuan Feng et al.
MARINE STRUCTURES (2020)
Effect of residual stress redistribution and weld reinforcement geometry on fatigue crack growth of butt welded joints
Amir Reza Shahani et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Ceramic waste SiC particle-reinforced Al matrix composite brake materials with a high friction coefficient
K. L. Zheng et al.
WEAR (2020)
Application of preference selection index method in performance based ranking of ceramic particulate (SiO2/SiC) reinforced AA2024 composite materials
Mukesh Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Effect of phosphate compound on physical and mechanical properties of SiO2 ceramic
Atchara Khamkongkaeo et al.
CERAMICS INTERNATIONAL (2019)
Joints of continuous carbon fiber reinforced lithium aluminosilicate glass ceramics matrix composites to Ti60 alloy brazed using Ti-Zr-Ni-Cu active alloy
Shengpeng Hu et al.
CHINESE JOURNAL OF AERONAUTICS (2019)
Brazing SiO2f/SiO2 composite to Invar alloy using a novel TiO2 particle-modified composite braze filler
L. X. Zhang et al.
CERAMICS INTERNATIONAL (2019)
Vibration of tapered composite driveshaft based on the hierarchical finite element analysis
Majed Almuslmani et al.
COMPOSITE STRUCTURES (2019)
Low-temperature brazing of alumina ceramics with bismuth-borate glass in air
Wei Guo et al.
MATERIALS CHARACTERIZATION (2019)
Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part II: Cavitation erosion effect
Zhengwei Li et al.
ULTRASONICS SONOCHEMISTRY (2019)
Refinement mechanism and physical properties of arc melted invar alloy with different modifiers
Cuixin Chen et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Numerical analysis on the residual stress distribution and its influence factor analysis for Si3N4/42CrMo brazed joint
Wang Tianpeng et al.
SIMULATION MODELLING PRACTICE AND THEORY (2019)
In situ formation of TiB whiskers to reinforce SiO2-BN/Ti6Al4V brazed joints
Jin Ba et al.
CERAMICS INTERNATIONAL (2019)
Effect of alloying with V and Ti on microstructures and properties in Fe-Ni-Mo-C invar alloys
Q. S. Sui et al.
MATERIALIA (2019)
Interfacial microstructures formation mechanism between SiO2 substrate and AgCuTi braze alloys
Chenglai Xin et al.
CERAMICS INTERNATIONAL (2018)
Brazing of SiO2-BN modified with in situ synthesized CNTs to Ti6Al4V alloy by TiZrNiCu brazing alloy
J. Ba et al.
CERAMICS INTERNATIONAL (2018)
Carbon nanotubes-reinforced Ni foam interlayer for brazing SiO2-BN with Ti6A14V alloy using TiZrNiCu brazing alloy
Jin Ba et al.
CERAMICS INTERNATIONAL (2018)
Brazing of SiO2f/SiO2 composite to Invar using a graphene-modified Cu-23Ti braze filler
Z. Sun et al.
CERAMICS INTERNATIONAL (2018)
Active brazed Invar-SiO2f/SiO2 joint using a low-expansion composite interlayer
Z. Sun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Controlling the intermetallics growth in the SiO2-BN/Invar brazed joint by vertical few-layer graphene
L. X. Zhang et al.
CERAMICS INTERNATIONAL (2018)
Cavitation at filler metal/substrate interface during ultrasonic-assisted soldering. Part I: Cavitation characteristics
Zhengwei Li et al.
ULTRASONICS SONOCHEMISTRY (2018)
The effect of crystal structure of SiO2 on the wettability of AgCuTi-SiO2f/SiO2 system
Q. Ma et al.
VACUUM (2018)
Effects of element diffusion on microstructure evolution and residual stresses in a brazed joint: Experimental and numerical modeling
Zhiquan Wei et al.
MATERIALIA (2018)
Microstructural evolution mechanisms of Ti600 and Ni-25%Si joint brazed with Ti-Zr-Ni-Cu amorphous filler foil
Xiaopeng Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Active metal brazing of SiO2-BN ceramic and Ti plate with Ag-Cu-Ti plus BN composite filler
Z. W. Yang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Brazing SiO2-BN diphase ceramic with Nb by using multilayer Ti-Ni composite foils
J. H. Yang et al.
VACUUM (2017)
Interfacial microstructure and improved wetting mechanism of SiO2f/SiO2 brazed with Nb by plasma treatment
Jinghuang Lin et al.
VACUUM (2017)
Brazing SiO2f/SiO2 with TC4 alloy with the help of coating graphene
Jinghuang Lin et al.
VACUUM (2017)
Interfacial microstructure and mechanical property of brazed copper/SiO2 ceramic joint
Y. Y. Song et al.
VACUUM (2017)
Vacuum brazing Nb and BN-SiO2 ceramic using a composite interlayer with network reinforcement architecture
L. X. Zhang et al.
CERAMICS INTERNATIONAL (2017)
Control interfacial microstructure and improve mechanical properties of TC4-SiO2f/SiO2 joint by AgCuTi with Cu foam as interlayer
Jing Huang Lin et al.
CERAMICS INTERNATIONAL (2016)
Relief of the residual stresses in Si3N4/Invar joints by multi-layered braze structure - Experiments and simulation
Tianpeng Wang et al.
CERAMICS INTERNATIONAL (2016)
Brazing SiC ceramic using novel B4C reinforced Ag-Cu-Ti composite filler
Xiangyu Dai et al.
CERAMICS INTERNATIONAL (2016)
Bright luminance from silicon dioxide film with carbon nanotube electron beam exposure
Su Woong Lee et al.
JOURNAL OF LUMINESCENCE (2016)
Regulating the surface structure of SiO2f/SiO2 composite for assisting in brazing with Nb
Qiang Ma et al.
MATERIALS LETTERS (2016)
Plasma treatment on SiO2f/SiO2 composites for their assisted brazing with Nb
Jun Lei Qi et al.
VACUUM (2016)
Effects of interfacial reaction and atomic diffusion on the mechanical property of Ti3SiC2 ceramic to Cu brazing joints
Haiyan Chen et al.
VACUUM (2016)
Vacuum brazing of C/C composite to TC4 alloy using nano-Al2O3 strengthened AgCuTi composite filler
Y. H. Zhou et al.
MATERIALS & DESIGN (2016)
Microstructure and mechanical properties of SiO2-BN ceramic and Invar alloy joints brazed with Ag-Cu-Ti
Y. Wang et al.
JOURNAL OF MATERIOMICS (2016)
Brazing TC4 alloy to Si3N4 ceramic using nano-Si3N4 reinforced AgCu composite filler
Y. X. Zhao et al.
MATERIALS & DESIGN (2015)
Brazing of SiO2f/SiO2 composite modified with few-layer graphene and Invar using AgCuTi alloy
Z. Sun et al.
MATERIALS & DESIGN (2015)
Uncovering the critical factor in determining the residual stresses level in Si3N4-GM filler alloy-42CrMo joints by FEM analysis and experiments
Yanming He et al.
CERAMICS INTERNATIONAL (2013)
Interfacial microstructure and strengthening mechanism of BN-doped metal brazed Ti/SiO2-BN joints
Z. W. Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Effect of joining temperature and holding time on microstructure and shear strength of Ti2AlC/Cu joints brazed using Ag-Cu filler alloy
J. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Diffusion bonding of ZrB2-SiC and Nb using dynamic compressed Ni foam interlayer
Weiqi Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Interlayer design to control interfacial microstructure and improve mechanical properties of active brazed Invar/SiO2-BN joint
Z. W. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Thermal-barrier coatings for more efficient gas-turbine engines
David R. Clarke et al.
MRS BULLETIN (2012)
Interfacial microstructure and mechanical property of SiO2-BN ceramics and Invar joint brazed with Ag-Cu-Ti active filler metal
Z. W. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Correlation between microstructure and mechanical properties of active brazed Invar/SiO2-BN joints
Z. W. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Ultrasonic Cavitation at Solid Surfaces
Dmitry G. Shchukin et al.
ADVANCED MATERIALS (2011)
The challenges in predicting the fatigue life of dissimilar brazed joints and initial finite element results for a tungsten to EUROFER97 steel brazed joint
Niall Robert Hamilton et al.
FUSION ENGINEERING AND DESIGN (2011)
Effect of in situ synthesized TiB whisker on microstructure and mechanical properties of carbon-carbon composite and TiBw/Ti-6Al-4V composite joint
Tiesong Lin et al.
MATERIALS & DESIGN (2011)
Microstructure and mechanical properties of Nd:YAG laser welded Invar 36 alloy
Yue Zhao et al.
ADVANCED MATERIAL SCIENCE AND TECHNOLOGY, PTS 1 AND 2 (2011)
Effects of processing parameters on microstructure and mechanical behavior of SiO2/Ti-6Al-4V joint brazed with AgCu/Ni interlayer
J. C. Feng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Structure and properties of short fibre reinforced silica matrix composite foams
Sarika Mishra et al.
CERAMICS INTERNATIONAL (2009)
Microstructure and fracture behavior of SiO2 glass ceramic and TC4 alloy joint brazed with TiZrNiCu alloy
Liu Duo et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2009)
Finite element modelling of brazed residual stress and its influence factor analysis for stainless steel plate-fin structure
Jianming Gong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Finite element analysis of rubber extrusion forming process for automobile weather strip
Y. S. Ha et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Structural role and coordination environment of Fe in Fe2O3-PbO-SiO2-Na2O composite glasses
F. Pinakidou et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2008)
Vacuum brazing of SiO2 glass ceramic and Ti-6Al-4V alloy using AgCuTi filler foil
H. B. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Interface microstructure and mechanical properties of the brazed SiO2 glass ceramic and 30Cr3 high-tensile steel joint
L. X. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Joining ceramics to metals using metallic foam
A. A. Shirzadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Thermo-mechanical analyses of large ceramic rings during brazing process
P. Zaccaria et al.
FUSION ENGINEERING AND DESIGN (2007)
An approach to obtaining homogeneously dispersed carbon nanotubes in Al powders for preparing reinforced Al-matrix composites
Chunnian He et al.
ADVANCED MATERIALS (2007)
Effect of the particle size of Al2O3 on the properties of filled heat-conductive silicone rubber
Wenying Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Principles and phenomena of bioengineering with glass-ceramics for dental restoration
Wolfram Holand et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
Synthesis and properties of copper conductive adhesives modified by SiO2 nanoparticles
Hongsheng Zhao et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2007)
Influence of nickel ion implantation on the inactive braze joining abilities of Al2O3 ceramics
BR Zhao et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2005)
Joining of SiC fibre reinforced borosilicate glass matrix composites to molybdenum by metal and silicate brazing
J Janczak-Rusch et al.
JOURNAL OF MATERIALS SCIENCE (2005)
An investigation of a new near-beta forging process for titanium alloys and its application in aviation components
YG Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Advanced ceramic matrix composite materials for current and future propulsion technology applications
S Schmidt et al.
ACTA ASTRONAUTICA (2004)
Brazing silicon nitride to an iron-based intermetallic using a copper interlayer
M Brochu et al.
CERAMICS INTERNATIONAL (2004)
Active metal brazing of zirconia
WB Hanson et al.
ACTA MATERIALIA (2000)