相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Part surface quality improvement studies in fused deposition modelling process: a review
Mohammad Taufik et al.
AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2022)
Integrated WAAM-Subtractive Versus Pure Subtractive Manufacturing Approaches: An Energy Efficiency Comparison
Gianni Campatelli et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2020)
A Topology Optimization Method for Hybrid Subtractive-Additive Remanufacturing
Jikai Liu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2020)
A sequence planning method for five-axis hybrid manufacturing of complex structural parts
Changqing Liu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2020)
Manufacturability analysis and process planning for additive and subtractive hybrid manufacturing of Quasi-rotational parts with columnar features
Li Chen et al.
COMPUTER-AIDED DESIGN (2020)
Cracks Repairing by Using Laser Additive and Subtractive Hybrid Manufacturing Technology
Zifa Xu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Laser finishing of 3D printed parts produced by material extrusion
F. Lambiase et al.
OPTICS AND LASERS IN ENGINEERING (2020)
Large-format fused deposition additive manufacturing: a review
Daniel Moreno Nieto et al.
RAPID PROTOTYPING JOURNAL (2020)
Areal Surface Roughness Optimization of Maraging Steel Parts Produced by Hybrid Additive Manufacturing
Philipp Wuest et al.
MATERIALS (2020)
Electrical energy and material efficiency analysis of machining, additive and hybrid manufacturing
A. Wippermann et al.
JOURNAL OF CLEANER PRODUCTION (2020)
On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review
Peirong Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Hybrid additive manufacturing of steels and alloys
Vladimir V. Popov et al.
MANUFACTURING REVIEW (2020)
Theoretical modelling and prediction of surface roughness for hybrid additive-subtractive manufacturing processes
Lin Li et al.
IISE TRANSACTIONS (2019)
An Adaptive Geometry Transformation and Repair Method for Hybrid Manufacturing
Maxwell Praniewicz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Effects of milling thickness on wire deposition accuracy of hybrid additive/subtractive manufacturing
Shuai Zhang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Optimal platform design and process plan for managing variety using hybrid manufacturing
Hoda ElMaraghy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Laser shock peening: A promising tool for tailoring metallic microstructures in selective laser melting
N. Kalentics et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Hybrid additive manufacture of 316L stainless steel with cold spray and selective laser melting: Microstructure and mechanical properties
Shuo Yin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of post-heat treatment on residual stress and tensile strength of hybrid additive and subtractive manufacturing
Pengfei Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Topology optimization of continuum structures under hybrid additive-subtractive manufacturing constraints
Yong Sheng Han et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2019)
Effect of post-processing on the dimensional accuracy of small plastic additive manufactured parts
Joseph Nsengimana et al.
RAPID PROTOTYPING JOURNAL (2019)
Ultrasonic Peening Treatment Used to Improve Stress Corrosion Resistance of AlSi10Mg Components Fabricated Using Selective Laser Melting
Xiaodong Xing et al.
METALS (2019)
Additive-incremental forming hybrid manufacturing technique to improve customised part performance
Giuseppina Ambrogio et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Electrochemical polishing of selective laser melted Inconel 718
Srishti Jain et al.
47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)
Characterization of chemical surface finishing with cold acetone vapours on ABS parts fabricated by FDM
Alessandro Colpani et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2019)
Machining characteristics of 18Ni-300 steel in additive/subtractive hybrid manufacturing
Wei Du et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
A review of digital manufacturing-based hybrid additive manufacturing processes
Li Chong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Material bead deposition with 2+2 A1/2 multi-axis machining process planning strategies with virtual verification for extruded geometry
Ruth Jill Urbanic et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Automated process planning for hybrid manufacturing Morad Behandish
Morad Behandish et al.
COMPUTER-AIDED DESIGN (2018)
Optimized sequence planning for multi-axis hybrid machining of complex geometries
Li Chen et al.
COMPUTERS & GRAPHICS-UK (2018)
Development of a modular computer-aided process planning (CAPP) system for additive-subtractive hybrid manufacturing of pockets, holes, and flat surfaces
Katie L. Basinger et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening
Sihai Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening
Rujian Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Hybrid Processes in Additive Manufacturing
Michael P. Sealy et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Polishing of fused deposition modeling products by hot air jet: Evaluation of surface roughness
Mohamed Adel et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Fused deposition modeling five-axis additive manufacturing: machine design, fundamental printing methods and critical process characteristics
Hongyao Shen et al.
RAPID PROTOTYPING JOURNAL (2018)
Abrasive flow finishing of FDM printed parts using a sustainable media
Harlal S. Mali et al.
RAPID PROTOTYPING JOURNAL (2018)
A novel process planning algorithm for additive and subtractive manufacturing based on skeleton tree matching
Jingbin Hao et al.
RAPID PROTOTYPING JOURNAL (2018)
A new method for locating candidate substrates for multi axis hybrid manufacturing systems
Mohamed A. Eldakroury et al.
RAPID PROTOTYPING JOURNAL (2018)
Laser shock peening of laser additive manufactured Ti6Al4V titanium alloy
Wei Guo et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Development and surface improvement of FDM pattern based investment casting of biomedical implants: A state of art review
Daljinder Singh et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Support-Free Volume Printing by Multi-Axis Motion
Chengkai Dai et al.
ACM TRANSACTIONS ON GRAPHICS (2018)
Novel dynamic CAPP system for hybrid additive-subtractive-inspection process
Osama Abdulhameed et al.
RAPID PROTOTYPING JOURNAL (2018)
Surface Quality Enhancement of Fused Deposition Modeling (FDM) Printed Samples Based on the Selection of Critical Printing Parameters
Mercedes Perez et al.
MATERIALS (2018)
Geometrical deviation identification and prediction method for additive manufacturing
Zhicheng Huang et al.
RAPID PROTOTYPING JOURNAL (2018)
Automated post machining process planning for a new hybrid manufacturing method of additive manufacturing and rapid machining
Niechen Chen et al.
RAPID PROTOTYPING JOURNAL (2018)
Additive and Substractive Surface Structuring by Femtosecond Laser Induced Material Ejection and Redistribution
Xxx Sedao et al.
MATERIALS (2018)
Latest Developments in Industrial Hybrid Machine Tools that Combine Additive and Subtractive Operations
Magdalena Cortina et al.
MATERIALS (2018)
Extracting features for manufacture of parts from existing components based on combining additive and subtractive technologies
Van Thao Le et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2018)
Investigation on Surface Quality in a Hybrid Manufacturing System Combining Wire and Arc Additive Manufacturing and Machining
Fang Li et al.
TRANSACTIONS ON INTELLIGENT WELDING MANUFACTURING, VOL I, NO. 2 2017 (2018)
Surface Finish Effects Using Coating Method on 3D Printing (FDM) Parts
A. H. M. Haidiezul et al.
MALAYSIAN TECHNICAL UNIVERSITIES CONFERENCE ON ENGINEERING AND TECHNOLOGY 2017 (MUCET 2017) (2018)
On the machinability of directed energy deposited Ti6Al4V
Olusola Oyelola et al.
ADDITIVE MANUFACTURING (2018)
Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement
Anthony R. McAndrew et al.
ADDITIVE MANUFACTURING (2018)
Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process
N. Jayanth et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Surface integrity of Inconel 718 by hybrid selective laser melting and milling
D. Brown et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
A review of slicing methods for directed energy deposition based additive manufacturing
Jing Xu et al.
RAPID PROTOTYPING JOURNAL (2018)
Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components
Yingtao Tian et al.
ADDITIVE MANUFACTURING (2018)
Fused filament fabrication of fiber-reinforced polymers: A review
Bastian Brenken et al.
ADDITIVE MANUFACTURING (2018)
The development of a strategy for direct part reuse using additive and subtractive manufacturing technologies
Van Thao Le et al.
ADDITIVE MANUFACTURING (2018)
Invited review article: Strategies and processes for high quality wire arc additive manufacturing
C. R. Cunningham et al.
ADDITIVE MANUFACTURING (2018)
A surface quality improvement apparatus for ABS parts fabricated by additive manufacturing
Chil-Chyuan Kuo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
A process planning framework and virtual representation for bead-based additive manufacturing processes
R. J. Urbanic et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength
Ashu Garg et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Study of hybrid additive manufacturing based on pulse laser wire depositing and milling
Zhi-peng Ye et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Surface roughness improvement of cast components in vacuum moulding by intermediate barrel finishing of fused deposition modelling patterns
Rupinder Singh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2017)
Topology optimization for hybrid additive-subtractive manufacturing
Jikai Liu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)
A novel method for improving surface finish of stereolithography apparatus
Qiang Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Towards criteria for sustainable process selection: On the modelling of pure subtractive versus additive/subtractive integrated manufacturing approaches
Paolo C. Priarone et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Environmental impact assessment of an innovative strategy based on an additive and subtractive manufacturing combination
Van Thao Le et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Material handling and registration for an additive manufacturing-based hybrid system
Steven Ambriz et al.
JOURNAL OF MANUFACTURING SYSTEMS (2017)
Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties
Yifan Jin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
An overview of additive manufacturing (3D printing) for microfabrication
Bharat Bhushan et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2017)
Laser polishing of additive manufactured Ti alloys
C. P. Ma et al.
OPTICS AND LASERS IN ENGINEERING (2017)
Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing
Hany Hassanin et al.
RAPID PROTOTYPING JOURNAL (2017)
Application of ultrasonic peening during DMLS production of 316L stainless steel and its effect on material behavior
Joshua Gale et al.
RAPID PROTOTYPING JOURNAL (2017)
Effect of cold vapour treatment on geometric accuracy of fused deposition modelling parts
Ashu Garg et al.
RAPID PROTOTYPING JOURNAL (2017)
Current state and potential of additive - hybrid manufacturing for metal parts
Danielle Strong et al.
RAPID PROTOTYPING JOURNAL (2017)
Edge quality in fused deposition modeling: I. Definition and analysis
Antonio Armillotta et al.
RAPID PROTOTYPING JOURNAL (2017)
Pre and post processing techniques to improve surface characteristics of FDM parts: a state of art review and future applications
Jasgurpreet Singh Chohan et al.
RAPID PROTOTYPING JOURNAL (2017)
Strategies to realize decentralized manufacture through hybrid manufacturing platforms
Blake A. Kendrick et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2017)
Ubiquitous manufacturing: Current practices, challenges, and opportunities
Toly Chen et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2017)
Application of bulk deformation methods for microstructural and material property improvement and residual stress and distortion control in additively manufactured components
Paul A. Colegrove et al.
SCRIPTA MATERIALIA (2017)
Optimization of Hybrid Manufacturing for Surface Quality, Material Consumption and Productivity Improvement
Damir Grguras et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2017)
Laser assisted finishing process for improved surface finish of fused deposition modelled parts
Mohammad Taufik et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
3D Laser Shock Peening - A new method for the 3D control of residual stresses in Selective Laser Melting
Nikola Kalentics et al.
MATERIALS & DESIGN (2017)
A novel decision-making logic for hybrid manufacture of prismatic components based on existing parts
Zicheng Zhu et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2017)
Surface polish of PLA parts in FDM using dichloromethane vapour
Yifan Jin et al.
2016 THE 3RD INTERNATIONAL CONFERENCE ON MECHATRONICS AND MECHANICAL ENGINEERING (ICMME 2016) (2017)
Tailoring residual stress profile of Selective Laser Melted parts by Laser Shock Peening
Nikola Kalentics et al.
ADDITIVE MANUFACTURING (2017)
Improvement of Dimensional Accuracy of 3-D Printed Parts using an Additive/Subtractive Based Hybrid Prototyping Approach
A. N. M. Amanullah Tomal et al.
6TH INTERNATIONAL CONFERENCE ON MECHATRONICS (ICOM'17) (2017)
Hot isostatic pressing of IN718 components manufactured by selective laser melting
W. Tillmann et al.
ADDITIVE MANUFACTURING (2017)
Design and Development of a Hybrid Machine combining Rapid Prototyping and CNC Milling Operation
A. N. M. Amanullah et al.
ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)
Hybrid ants: A new approach for geometry creation for additive and hybrid manufacturing
W. P. Essink et al.
COMPLEX SYSTEMS ENGINEERING AND DEVELOPMENT (2017)
Increasing component functionality via multi-process additive manufacturing
Jose L. Coronel et al.
MICRO- AND NANOTECHNOLOGY SENSORS, SYSTEMS, AND APPLICATIONS IX (2017)
Single-crystal turbine blade tip repair by laser cladding and remelting
Stefan Kaierle et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2017)
Geometric Complexity Based Process Selection for Hybrid Manufacturing
Anay Joshi et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
Innovative grid molding and cooling using an additive and subtractive hybrid CNC machine tool
Masakazu Soshi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade
E. Salvati et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Laser polishing of 3D printed mesoscale components
Debajyoti Bhaduri et al.
APPLIED SURFACE SCIENCE (2017)
Investigation for surface finish improvement of FDM parts by vapor smoothing process
Rupinder Singh et al.
COMPOSITES PART B-ENGINEERING (2017)
The role of additive manufacturing in the era of Industry 4.0
Ugur M. Dilberoglu et al.
27TH INTERNATIONAL CONFERENCE ON FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, FAIM2017 (2017)
A decision support methodology for embodiment design and process chain selection for hybrid manufacturing platforms
Andrew Gleadall et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Hybrid additive and subtractive machine tools - Research and industrial developments
Joseph M. Flynn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Evaluation of Select Surface Processing Techniques for In Situ Application During the Additive Manufacturing Build Process
Todd A. Book et al.
JOM (2016)
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
Simon Ford et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Improvement in Geometrical Accuracy and Mechanical Property for Arc-Based Additive Manufacturing Using Metamorphic Rolling Mechanism
Yang Xie et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2016)
The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti-6Al-4V
J. Donoghue et al.
MATERIALS CHARACTERIZATION (2016)
Residual stress of as-deposited and rolled wire plus arc additive manufacturing Ti-6Al-4V components
F. Martina et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Optimization of fused deposition modeling process parameters for dimensional accuracy using I-optimality criterion
Omar Ahmed Mohamed et al.
MEASUREMENT (2016)
Investigation of forged-like microstructure produced by a hybrid manufacturing process
Romy Francis et al.
RAPID PROTOTYPING JOURNAL (2016)
A comprehensive assessment on the impact of post-processing variables on tensile, compressive and bending characteristics for 3D printed components
David Impens et al.
RAPID PROTOTYPING JOURNAL (2016)
HDMR technology for the aircraft metal part
Zhang Hai-ou et al.
RAPID PROTOTYPING JOURNAL (2016)
Investigation of part distortions as a result of hybrid manufacturing
Zicheng Zhu et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)
Finishing of Fused Deposition Modeling parts by CNC machining
Alberto Boschetto et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)
From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift
Won-Shik Chu et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Improving the surface quality and mechanical properties by shot-peening of 17-4 stainless steel fabricated by additive manufacturing
Bandar AlMangour et al.
MATERIALS & DESIGN (2016)
Effect of Hot Vapor Smoothing Process on Surface Hardness of Fused Deposition Modeling Parts
Rupinder Singh et al.
3D PRINTING AND ADDITIVE MANUFACTURING (2016)
CNC-assisted selective melting for improved surface finish of FDM parts
Mohammad Taufik et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
A Study of Post-Processing Methods for Improving the Tightness of a Part Fabricated by Fused Deposition Modeling
Kwang-Ho Jo et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Optimized build orientation of additive manufactured parts for improved surface quality and build time
P. Delfs et al.
ADDITIVE MANUFACTURING (2016)
Study on consistently optimum deposition conditions of typical metal material using additive/subtractive hybrid machine tool
Adam Hansel et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Influence of finish machining on the surface integrity of Ti6Al4V produced by Selective Laser Melting
Samuel Milton et al.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)
Machining of Additively Manufactured Parts: Implications for Surface Integrity
Olusola Oyelola et al.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)
Combined additive manufacturing approaches in tissue engineering
S. M. Giannitelli et al.
ACTA BIOMATERIALIA (2015)
Process planning for additive and subtractive manufacturing technologies
Stephen T. Newman et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Laser polishing of selective laser melted components
S. Marimuthu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Optimization of the printing parameters affecting dimensional accuracy and internal cavity for HIPS material used in fused deposition modeling processes
Mandi Kaveh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Roughness prediction in coupled operations of fused deposition modeling and barrel finishing
Alberto Boschetto et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy
S. Palanivel et al.
MATERIALS & DESIGN (2015)
Functional encapsulation of laser melted Inconel 718 by Arc-PVD and HVOF for post compacting by hot isostatic pressing
W. Tillmann et al.
POWDER METALLURGY (2015)
Surface improvement of fused deposition modeling parts by barrel finishing
Alberto Boschetto et al.
RAPID PROTOTYPING JOURNAL (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Application of a hybrid process for high precision manufacture of difficult to machine prismatic parts
Zicheng Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Remanufacturing of turbine blades by laser direct deposition with its energy and environmental impact analysis
J. Michael Wilson et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Development of a hybrid rapid prototyping system using low-cost fused deposition modeling and five-axis machining
Wei-chen Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Metallization on FDM Parts Using the Chemical Deposition Technique
Azhar Equbal et al.
COATINGS (2014)
Design of a Hybrid 5-Axis Machine Tool with Fused-Deposition-Modeling Capability
Wei-chen Lee et al.
ADVANCED RESEARCH IN MATERIAL SCIENCE AND MECHANICAL ENGINEERING, PTS 1 AND 2 (2014)
Directly Manufacturing Table Tennis Mould by Hybrid Plasma Deposition & Milling
Xinhong Xiong et al.
ADVANCES IN MATERIALS AND MATERIALS PROCESSING IV, PTS 1 AND 2 (2014)
Potential of cold gas dynamic spray as additive manufacturing technology
A. Sova et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
A review of hybrid manufacturing processes - state of the art and future perspectives
Z. Zhu et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2013)
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices
Eric J. McCullough et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Microstructure and residual stress improvement in wire and arc additively manufactured parts through high-pressure rolling
Paul A. Colegrove et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V
Chunlei Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Hybrid direct manufacturing method of metallic parts using deposition and micro continuous rolling
Haiou Zhang et al.
RAPID PROTOTYPING JOURNAL (2013)
The development of a novel process planning algorithm for an unconstrained hybrid manufacturing process
Zicheng Zhu et al.
JOURNAL OF MANUFACTURING PROCESSES (2013)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Effect of hot isostatic pressing (HIP) on Al composite parts made from laser consolidated Al/Fe2O3 powder mixtures
S. Dadbakhsh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
E. Yasa et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
A new DFM approach to combine machining and additive manufacturing
Olivier Kerbrat et al.
COMPUTERS IN INDUSTRY (2011)
The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts
Evren Yasa et al.
RAPID PROTOTYPING JOURNAL (2011)
Integrated Process Planning for a Multiaxis Hybrid Manufacturing System
Lan Ren et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Investigation of laser and process parameters for Selective Laser Erosion
E. Yasa et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2010)
Manufacturability analysis to combine additive and subtractive processes
Olivier Kerbrat et al.
RAPID PROTOTYPING JOURNAL (2010)
Low cost integration of additive and subtractive processes for hybrid layered manufacturing
K. P. Karunakaran et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2010)
Manufacturing complexity evaluation at the design stage for both machining and layered manufacturing
O. Kerbrat et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2010)
Metal direct prototyping by using hybrid plasma deposition and milling
Xinhong Xiong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Direct rapid high-temperature alloy prototyping by hybrid plasma-laser technology
Ying-Ping Qian et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
A new method of direct metal prototyping: hybrid plasma deposition and milling
Xinhong Xiong
RAPID PROTOTYPING JOURNAL (2008)
An integrated adaptive repair solution for complex aerospace components through geometry reconstruction
Jian Gao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Laser polishing of parts built up by selective laser sintering
A. Lamikiz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication
J. Pattison et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Using abrasive flow machining to seal and finish conformal channels in laminated tooling
Robert E. Williams et al.
RAPID PROTOTYPING JOURNAL (2007)
Applications of a hybrid manufacturing process for fabrication of metallic structures
Frank Liou et al.
RAPID PROTOTYPING JOURNAL (2007)
High speed milling, electro discharge machining and direct metal laser sintering: A method to optimize these processes in hybrid rapid tooling
P Mognol et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Fabrication of cemented carbide molds with internal cooling channels using hybrid process of powder layer compaction and milling
Y Mizukami et al.
MATERIALS TRANSACTIONS (2005)
3D welding and milling: Part I - a direct approach for freeform fabrication of metallic prototypes
YA Song et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
3D welding and milling: part II - optimization of the 3D welding process using an experimental design approach
YA Song et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Concave edge-based part decomposition for hybrid rapid prototyping
Z Hu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Adaptive slicing for a multi-axis laser aided manufacturing process
J Zhang et al.
JOURNAL OF MECHANICAL DESIGN (2004)
Hybrid layered manufacturing: direct rapid metal tool-making process
KP Karunakaran et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2004)
Development of translucent FDM parts by post-processing
SH Ahn et al.
RAPID PROTOTYPING JOURNAL (2004)
Residual stress within metallic model made by selective laser melting process
M Shiomi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Improvement of surface finish by staircase machining in fused deposition modeling
PM Pandey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Determination of optimal build orientation for hybrid rapid-prototyping
Z Hu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Hybrid rapid prototyping system using machining and deposition
JH Hur et al.
COMPUTER-AIDED DESIGN (2002)
Development of a direct metal freeform fabrication technique using CO2 laser welding and milling technology
DS Choi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Mold fabrication and modification using hybrid processes of selective laser cladding and milling
JY Jeng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Contoured edge slice generation in rapid prototyping via 5-axis machining
JB Taylor et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2001)
On the integration of layered manufacturing and material removal processes
P Kulkarni et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2000)
分享论文
