相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A Conveying Model of Fluid Partially Filled in a Nontwin Screw Extruder Allowing for a Positive Displacement
Huiwen Yu et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Nanofibrillated cellulose obtained from soybean hull using simple and eco-friendly processes based on reactive extrusion
Flavia Debiagi et al.
CELLULOSE (2020)
Simulation of flow and mixing for highly viscous fluid in a twin screw extruder with a conveying element using parallelized smoothed particle hydrodynamics
Tianwen Dong et al.
CHEMICAL ENGINEERING SCIENCE (2020)
Enhanced Dispersive Mixing in Twin-Screw Extrusion via Extension-Dominated Static Mixing Elements of Varying Contraction Ratios
H. Chen et al.
INTERNATIONAL POLYMER PROCESSING (2020)
Thermal hazard investigation and hazardous scenarios identification using thermal analysis coupled with numerical simulation for 2-(1-cyano-1-methylethyl)azocarboxamide
Shang-Hao Liu et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Double-external-field enables bulk controlled radical polymerization with narrow molecular weight distribution at high conversion
Bian Chao et al.
AICHE JOURNAL (2020)
Alkene-azide chemistry: a facile, one-step, solvent- and catalyst-free approach for developing new functional monomers and polymers
Santimukul Santra et al.
POLYMER CHEMISTRY (2020)
Lipase-catalyzed ring-opening copolymerization of ω-pentadecalactone and δ-valerolactone by reactive extrusion
Changcun Li et al.
GREEN CHEMISTRY (2020)
Alternative reaction conditions: Enabling technologies in solvent-free protocols
Pedro Cintas et al.
CURRENT OPINION IN GREEN AND SUSTAINABLE CHEMISTRY (2020)
Thermodynamics of Aromatic Cyclic Ester Polymerization in Bulk
Chong He et al.
CHINESE JOURNAL OF POLYMER SCIENCE (2019)
New Kids in Lactide Polymerization: Highly Active and Robust Iron Guanidine Complexes as Superior Catalysts
Ruth D. Rittinghaus et al.
CHEMSUSCHEM (2019)
A Convenient Dual-Side Anionic Initiator Based on 2,6-Luditine/s-Butyl Lithium
Wu Bin Ying et al.
MACROMOLECULAR RESEARCH (2019)
Extended Regression Models for Predicting the Pumping Capability and Viscous Dissipation of Two-Dimensional Flows in Single-Screw Extrusion
Wolfgang Roland et al.
POLYMERS (2019)
In Situ Radical Polymerization and Grafting Reaction Simultaneously Initiated by Fluorinated Graphene
Wenchuan Lai et al.
LANGMUIR (2019)
Effect of screw configuration on the dispersion and properties of polypropylene/multiwalled carbon nanotube composite
Gulstan S. Ezat et al.
POLYMER COMPOSITES (2019)
Thermo-Mechanical Properties of Injection Molded Components Manufactured by Engineered Biodegradable Blends
M. Barletta et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)
Thermal research on the uncontrolled behavior of styrene bulk polymerization
Weijun Wang et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)
Effects of extruder screw configurations on thermal properties of glass fiber-reinforced polyamide 6 composites throughout the direct long-fiber-reinforced thermoplastics process
Mingyu Yang et al.
POLYMER COMPOSITES (2019)
Effect of geometry and fill level on the transport and mixing behaviour of a co-rotating twin screw extruder
Martin Robinson et al.
COMPUTATIONAL PARTICLE MECHANICS (2019)
Synthesis of novel thermotropic liquid crystalline polymers by a reactive extrusion process
Kyunghwan Oh et al.
RSC ADVANCES (2019)
Hydrocarbon-Soluble Piperazine-Containing Dilithium Anionic Initiator for High Cis-1,4 Isoprene Polymerization
Alison R. Schultz et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2018)
Decoupling Study of Melt Polycondensation of Polycarbonate: Experimental and Modeling of Reaction Kinetics and Mass Transfer in Thin Films Polycondensation Process
Fenglei Bi et al.
MACROMOLECULAR REACTION ENGINEERING (2018)
Efficient Synthesis of Diethyl Carbonate from Propylene Carbonate and Ethanol Using Mg-La Catalysts: Characterization, Parametric, and Thermodynamic Analysis
Kartikeya Shukla et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Chaotic Manifold Analysis of Four-Screw Extruders Based on Lagrangian Coherent Structures
Xiang Zhe Zhu et al.
MATERIALS (2018)
Experimental study and evaluation of mixing mechanism and performance in triple-screw extruder
Kunxiao Yang et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Study on Ultrasonic Assisted Mechanism of Ring Opening Polymerization of Octamethylcyclotetrasiloxane (D4)
Huaxu Ling et al.
MATERIALS SCIENCE, ENERGY TECHNOLOGY AND POWER ENGINEERING II (MEP2018) (2018)
Organocatalytic ring-opening polymerization of L-lactide in bulk: A long standing challenge
Leila Mezzasalma et al.
EUROPEAN POLYMER JOURNAL (2017)
The application of genetic algorithm for the design of screw in twin-screw extruder
Jianhua Ren et al.
WORLD JOURNAL OF ENGINEERING (2017)
Twin Screw Extruders as Continuous Mixers for Thermal Processing: a Technical and Historical Perspective
Charlie Martin
AAPS PHARMSCITECH (2016)
Analytical and Experimental Evaluation of Dispersive Mixing Performance of Special Rotor Segments in a Corotating Twin-Screw Extruder
S. Yamada et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2016)
Dispersive Mixing Performance Evaluation of Special Rotor Segments in an Intermeshing Co-Rotating Twin-Screw Extruder by Using Weighted Probability Distributions
S. Yamada et al.
INTERNATIONAL POLYMER PROCESSING (2015)
Preparation and Reaction Kinetics of Polypropylene-graft-Cardanol by Reactive Extrusion and Its Compatibilization on Polypropylene/Polystyrene
Qinhui Chen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Analysis of the dispersive mixing efficiency in a twin-screw extrusion processing of starch based matrix
M. A. Emin et al.
JOURNAL OF FOOD ENGINEERING (2013)
Ring-Opening Polymerization-An Introductory Review
Oskar Nuyken et al.
POLYMERS (2013)
Dynamic simulation and control of auto-refrigerated CSTR and tubular reactor for bulk styrene polymerization
Mohsen Gharaghani et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2012)
Studies on positive conveying in helically channeled single screw extruders
L. Pan et al.
EXPRESS POLYMER LETTERS (2012)
Kinetic Monte Carlo Simulations of Flow-Assisted Polymerization
Prateek K. Jha et al.
ACS MACRO LETTERS (2012)
Cationic Polymerization of Vinyl Monomers in Aqueous Media: From Monofunctional Oligomers to Long-Lived Polymer Chains
Sergei V. Kostjuk et al.
ACCOUNTS OF CHEMICAL RESEARCH (2010)
Flow Accelerates Interfacial Coupling Reactions
Jianbin Zhang et al.
MACROMOLECULES (2010)
Macrokinetic features of the free-radical polymerization of styrene under nonisothermal conditions
A. A. Butakov et al.
THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING (2010)
An Experimental Study on Shear Stress Characteristics of Polymers in Plasticating Single-Screw Extruders
Atakan Altinkaynak et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Highly active and stereoselective zirconium and hafnium alkoxide initiators for solvent-free ring-opening polymerization of rac-lactide
Amanda J. Chmura et al.
CHEMICAL COMMUNICATIONS (2008)
Kinetics and thermodynamics of the water sorption of 2-hydroxyethyl methacrylate/styrene copolymer hydrogels
Jianquan Wang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Discrete particle simulations of solids compaction and conveying in a single-screw extruder
P. A. Moysey et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Polycondensation of 'a-bn' or 'a2++bn' Monomers -: A comparison
Hans R. Kricheldorf
MACROMOLECULAR RAPID COMMUNICATIONS (2007)
Anionic vinyl polymerization -: 50 years after Michael!Szwarc
Durairaj Baskaran et al.
PROGRESS IN POLYMER SCIENCE (2007)
Modeling of reactive systems in twin-screw extrusion: challenges and applications
Bruno Vergnes et al.
COMPTES RENDUS CHIMIE (2006)
A mathematical model for the reactive extrusion of methyl methacrylate in a co-rotating twin-screw extruder
A Zagal et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
Reaction kinetics of multiphase polymer systems under flow
LF Feng et al.
AICHE JOURNAL (2004)
Generic dynamic model for simulation and control of reactive extrusion
S Choulak et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2004)
Modelling of flow and chemistry in twin screw extruders
B Vergnes et al.
PLASTICS RUBBER AND COMPOSITES (2004)
A comprehensive kinetic model for the combined chemical and thermal polymerization of styrene up to high conversions
C Kotoulas et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2003)
Ring opening polymerization of adipic anhydride initiated by dibutylmagnesium initiator
Z Li et al.
EUROPEAN POLYMER JOURNAL (2003)
Determination of the equilibrium constant for the reaction between bisphenol A and diphenyl carbonate
SM Gross et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2002)
Kinetics simulation of high viscous styrene bulk polymerization system
J Ling et al.
EUROPEAN POLYMER JOURNAL (2001)
Distributive mixing in a single-screw extruder - Evaluation in the flow direction
SP Rwei
POLYMER ENGINEERING AND SCIENCE (2001)
Melt polycondensation of bisphenol a polycarbonate by a forced gas sweeping process
BG Woo et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)
Polymerization of ε-caprolactone in a twin screw extruder -: Experimental study and modelling
A Poulesquen et al.
INTERNATIONAL POLYMER PROCESSING (2001)
Development of high performance operational strategies for polymerization reactor
ECV de Toledo et al.
COMPUTERS & CHEMICAL ENGINEERING (2000)
Bulk polymerization of epsilon-caprolactone in twin screw extruder - A step toward the process control
J Gimenez et al.
INTERNATIONAL POLYMER PROCESSING (2000)