相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review
Anh Tuan Hoang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)
The electric propulsion system as a green solution for management strategy ofCO2emission in ocean shipping: A comprehensive review
Hoang Phuong Nguyen et al.
INTERNATIONAL TRANSACTIONS ON ELECTRICAL ENERGY SYSTEMS (2021)
Pyrolysis of biomass for efficient extraction of biofuel
Ashok Patel et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Catalytic hydrogenolysis of hydroxymethylfurfural to highly selective 2,5-dimethylfuran over FeCoNi/h-BN catalyst
Naimeng Chen et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Experiments and Kinetic Modeling of Diffusion Flame Extinction of 2-Methylfuran, 2,5-Dimethylfuran, and Binary Mixtures with Isooctane
Amrit B. Sahu et al.
ENERGY & FUELS (2020)
Formulating gasoline surrogate for emulating octane blending properties with ethanol
Hao Yuan et al.
FUEL (2020)
Ab-initio studies of thermal unimolecular decomposition of furan: A complementary deterministic and stochastic master equation model
Tam V. T. Mai et al.
FUEL (2020)
Understanding catalytic hydrogenolysis of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) using carbon supported Ru catalysts
Tai-Wei Tzeng et al.
FUEL PROCESSING TECHNOLOGY (2020)
Conversion of steam exploded hydrolyzate of oil palm trunk to furfural by using sulfuric acid, solid acid, and base catalysts in one pot
Afrasiab Khan Tareen et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition
Dao Nam Cao et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)
Effects of blending 2,5-dimethylfuran on the laminar burning velocity and ignition delay time of isooctane/air mixture
Atmadeep Bhattacharya et al.
COMBUSTION THEORY AND MODELLING (2019)
Fast Pyrolysis of Corn Stalks at Different Growth Stages to Selectively Produce 4-Vinyl Phenol and 5-Hydroxymethyl Furfural
Xiao-Ning Ye et al.
WASTE AND BIOMASS VALORIZATION (2019)
Impact of Jatropha Oil on Engine Performance, Emission Characteristics, Deposit Formation, and Lubricating Oil Degradation
Anh Tuan Hoang et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2019)
A study of emission characteristic, deposits, and lubrication oil degradation of a diesel engine running on preheated vegetable oil and diesel oil
Anh Tuan Hoang et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)
Understanding the Effect of Oxygenated Additives on Combustion Characteristics of Gasoline
Shrabanti Roy et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2019)
Synthesis and characterization of bimetallic catalysts Pd-Ru and Pt-Ru supported on γ-alumina and zeolite FAU for the catalytic transformation of HMF
Hector Fabio Perez-Bustos et al.
FUEL (2019)
Parametrization of the temperature dependence of laminar burning velocity for methane and ethane flames
Xinlu Han et al.
FUEL (2019)
Continuous condensed-phase ethanol conversion to higher alcohols: Experimental results and techno-economic analysis
Iman Nezam et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Photocatalytic selective oxidation of biomass-derived 5-hydroxymethylfurfural to 2,5-diformylfuran on WO3/g-C3N4 composite under irradiation of visible light
Huili Zhang et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2019)
Effect of 2,5-dimethylfuran addition on ignition delay times of n-heptane at high temperatures
Zhenhua Gao et al.
FRONTIERS IN ENERGY (2019)
One-pot di- and polysaccharides conversion to highly selective 2,5-dimethylfuran over Cu-Pd/Amino-functionalized Zr-based metal-organic framework (UiO-66(NH2))@SGO tandem catalyst
Rizki Insyani et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2019)
A core correlation of spray characteristics, deposit formation, and combustion of a high-speed diesel engine fueled with Jatropha oil and diesel fuel
Anh Tuan Hoang et al.
FUEL (2019)
Development of a detailed kinetic model for the combustion of biomass
Amal Dhahak et al.
FUEL (2019)
Effect of the initial pressures on evolution of intrinsically unstable hydrogen/air premixed flame fronts
Yongliang Xie et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Recent advances in catalytic conversion of biomass to 5-hydroxymethylfurfural and 2, 5-dimethylfuran
Haiyong Wang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Hydrogenolysis of Biomass-Derived 5-Hydroxymethylfurfural to Produce 2,5-Dimethylfuran Over Ru-ZrO2-MCM-41 Catalyst
Amol B. Raut et al.
CHEMISTRYSELECT (2019)
Effects of diluents on laminar burning characteristics of bio-syngas at elevated pressure
Quan Zhou et al.
FUEL (2019)
A reduced mechanism for 2,5-dimetylfuran with assembled mechanism reduction methods
Zemin Tian et al.
FUEL (2019)
Smart technologies for promotion of energy efficiency, utilization of sustainable resources and waste management
Sandro Nizetic et al.
JOURNAL OF CLEANER PRODUCTION (2019)
One-Pot Enzyme Cascade for Controlled Synthesis of Furancarboxylic Acids from 5-Hydroxymethylfurfural by H2O2 Internal Recycling
Hao-Yu Jia et al.
CHEMSUSCHEM (2019)
Pyrolysis of Furan and Its Methylated Derivatives: A Shock-Tube/TOF-MS and Modeling Study
Lena Weiser et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2019)
Experimental study on spray and emission characteristics of a diesel engine fueled with preheated bio-oils and diesel fuel
Anh Tuan Hoang
ENERGY (2019)
Experimental and Theoretical Investigation of the Pyrolysis of Furfural
Yamin Li et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2019)
Comparative analysis on performance and emission characteristics of an in-Vietnam popular 4-stroke motorcycle engine running on biogasoline and mineral gasoline
Anh Tuan Hoang et al.
RENEWABLE ENERGY FOCUS (2019)
A non-noble bimetallic alloy in the highly selective electrochemical synthesis of the biofuel 2,5-dimethylfuran from 5-hydroxymethylfurfural
Yan-Ru Zhang et al.
GREEN CHEMISTRY (2019)
A new methodology for the production of furfural as a renewable energy source from bagasse in acidic aqueous media
M. Yazdizadeh et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)
Nitrogen-doped carbon-decorated copper catalyst for highly efficient transfer hydrogenolysis of 5-hydroxymethylfurfural to convertibly produce 2,5-dimethylfuran or 2,5-dimethyltetrahydrofuran
Zhi Gao et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
Dandelion-like cobalt oxide microsphere-supported RuCo bimetallic catalyst for highly efficient hydrogenolysis of 5-hydroxymethylfurfural
Zhi Gao et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2018)
Effects of swirling combustion on soot characteristics in 2,5-dimethylfuran/n-heptane diffusion flames
Penghui Jia et al.
APPLIED THERMAL ENGINEERING (2018)
Laser diagnostics and chemical kinetic analysis of PAHs and soot in co-flow partially premixed flames using diesel surrogate and oxygenated additives of n-butanol and DMF
Haifeng Liu et al.
COMBUSTION AND FLAME (2018)
Recent Trends in the Production, Combustion and Modeling of Furan-Based Fuels
Mazen A. Eldeeb et al.
ENERGIES (2018)
Ethanol production form acorn starch by tannin tolerance mutant Pachysolen tannophilus
Zhang Ning et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)
A comparative analysis of n-butanol/diesel and 1-pentanol/diesel blends in a compression ignition engine
Alpaslan Atmanli et al.
FUEL (2018)
Hydrogenolysis of 5-hydroxymethylfurfural to 2,5-dimethylfuran over supported Pt-Co bimetallic catalysts under mild conditions
Xiaofeng Wang et al.
GREEN CHEMISTRY (2018)
Assessing the potential sustainability benefits of agricultural residues: Biomass conversion to syngas for energy generation or to chemicals production
Francisco J. Lozano et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Combustion and Emission Characteristics of Diesel Engines Using Diesel, DMF/Diesel, and N-Pentanol/Diesel Fuel Blends
Quanchang Zhang et al.
JOURNAL OF ENERGY ENGINEERING (2018)
Study of Methylidyne Radical (CH and CD) Reaction with 2,5-Dimethylfuran Using Multiplexed Synchrotron Photoionization Mass Spectrometry
Erica Carrasco et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2018)
A comprehensive review of measurements and data analysis of laminar burning velocities for various fuel plus air mixtures
Alexander A. Konnov et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2018)
Traversing the history of solid catalysts for heterogeneous synthesis of 5-hydroxymethylfurfural from carbohydrate sugars: A review
Bhumica Agarwal et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
TDDFT studies for electronic excitations of the intermediates and radicals in the pyrolysis of 2,5-dimethylfuran
Yuanyuan Li et al.
AIP ADVANCES (2018)
Combustion and Emission Characteristics of Diesel Engines Using Diesel, DMF/Diesel, and N-Pentanol/Diesel Fuel Blends
Quanchang Zhang et al.
JOURNAL OF ENERGY ENGINEERING (2018)
Sulfonic polymer catalysts for converting of furfural to high-value chemicals
Xiong Peng et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)
H-Atom-Forming Reaction Pathways in the Pyrolysis of Furan, 2-Methylfuran, and 2,5-Dimethylfuran: A Shock-Tube and Modeling Study
Isabelle Weber et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2018)
Biocatalytic Transformation of 5-Hydroxymethylfurfural into High-Value Derivatives: Recent Advances and Future Aspects
Lei Hu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
MEASUREMENT AND PREDICTION OF THE DENSITY AND VISCOSITY OF BIODIESEL BLENDS
Minh Tuan Pham et al.
INTERNATIONAL JOURNAL OF TECHNOLOGY (2018)
Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Ni Supported on Zirconium Phosphate Catalysts
Changhui Zhu et al.
ACS OMEGA (2018)
Tomorrow's biofuels: Goals and hopes
Ayhan Demirbas
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2017)
On the flame stability and laminar burning speeds of syngas/O2/He premixed flame
Omid Askari et al.
FUEL (2017)
Catalytic transfer hydrogenation/hydrogenolysis of 5-hydroxymethylfurfural to 2,5-dimethylfuran over Ni-Co/C catalyst
Panpan Yang et al.
FUEL (2017)
Flame structure and laminar burning speed of gas to liquid fuel air mixtures at moderate pressures and high temperatures
Ziyu Wang et al.
FUEL (2017)
Experimental and kinetic modeling studies of furan pyrolysis: Fuel decomposition and aromatic ring formation
Zhanjun Cheng et al.
FUEL (2017)
Direct one-pot conversion of monosaccharides into high-yield 2,5-dimethylfuran over a multifunctional Pd/Zr-based metal-organic framework@sulfonated graphene oxide catalyst
Rizki Insyani et al.
GREEN CHEMISTRY (2017)
A continuous flow process for the production of 2,5-dimethylfuran from fructose using (non-noble metal based) heterogeneous catalysis
Max Braun et al.
GREEN CHEMISTRY (2017)
Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid Using O2 and a Photocatalyst of Co-thioporphyrazine Bonded to g-C3N4
Shuai Xu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Physicochemical properties of ethanol with the addition of biodiesel for use in Otto cycle internal combustion engines: Results and revision
Edson Vanzela et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Review on the characteristics of butanol, its production and use as fuel in internal combustion engines
Wagner Roberto da Silva Trindade et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Recent advances in catalytic transformation of biomass-derived 5-hydroxymethylfurfural into the innovative fuels and chemicals
Lei Hu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Support Induced Control of Surface Composition in Cu-Ni/TiO2 Catalysts Enables High Yield Co-Conversion of HMF and Furfural to Methylated Furans
Bhogeswararao Seemala et al.
ACS CATALYSIS (2017)
Unraveling the surface state and composition of highly selective nanocrystalline Ni-Cu alloy catalysts for hydrodeoxygenation of HMF
Jing Luo et al.
CATALYSIS SCIENCE & TECHNOLOGY (2017)
Inclusion of Zn into Metallic Ni Enables Selective and Effective Synthesis of 2,5-Dimethylfuran from Bioderived 5-Hydroxymethylfurfural
Xiao Kong et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)
Graphitic Carbon Nitride (g-C3N4)-derived Fe-N-C Catalysts for Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran
Jiang Li et al.
CHEMISTRYSELECT (2017)
Effective Production of 2,5-Dimethylfuran from Biomass-derived 5-Hydroxymethylfurfural on ZrO2-doped Graphite Electrode
Xueqing Yu et al.
CHEMISTRYSELECT (2017)
Ruthenium supported on CoFe layered double oxide for selective hydrogenation of 5-hydroxymethylfurfural
Qingyang Li et al.
MOLECULAR CATALYSIS (2017)
Carbon-coated Cu-Co bimetallic nanoparticles as selective and recyclable catalysts for production of biofuel 2,5-dimethylfuran
Bingfeng Chen et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2017)
Kinetic Studies on the Reactions of Atomic Oxygen with Furan, 2-Methylfuran, and 2,5-Dimethylfuran at Elevated Temperatures
Haruka Yoshizawa et al.
CHEMISTRY LETTERS (2017)
Comparative experimental and modeling study of the low- to moderate-temperature oxidation chemistry of 2,5-dimethylfuran, 2-methylfuran, and furan
Luc-Sy Tran et al.
COMBUSTION AND FLAME (2017)
Ignition delay time measurements of primary reference fuel blends
Mohammed AlAbbad et al.
COMBUSTION AND FLAME (2017)
The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil
Tuan Anh Hoang et al.
INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT-IJRED (2017)
Base metal-Pt alloys: A general route to high selectivity and stability in the production of biofuels from HMF
Jing Luo et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2016)
Determinants of global CO2 emissions growth
Xuemei Jiang et al.
APPLIED ENERGY (2016)
Oxy-fuel combustion of pulverized fuels: Combustion fundamentals and modeling
Chungen Yin et al.
APPLIED ENERGY (2016)
Development of a reduced toluene reference fuel (TRF)-2,5-dimethylfuran-polycyclic aromatic hydrocarbon (PAH) mechanism for engine applications
Xinlei Liu et al.
COMBUSTION AND FLAME (2016)
A comprehensive experimental and kinetic modeling study of ethylbenzene combustion
Wenhao Yuan et al.
COMBUSTION AND FLAME (2016)
Experimental study of 2,5-dimethylfuran and 2-methylfuran in a rapid compression machine: Comparison of the ignition delay times and reactivity at low to intermediate temperature
Nan Xu et al.
COMBUSTION AND FLAME (2016)
Influence of the Temperature and 2,5-Dimethylfuran Concentration on Its Sooting Tendency
Katiuska Alexandrino et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2016)
Perovskite type oxide-supported Ni catalysts for the production of 2,5-dimethylfuran from biomass-derived 5-hydroxymethylfurfural
Meng-Yuan Chen et al.
GREEN CHEMISTRY (2016)
High hydrogen content syngas fuel burning in lean premixed spherical flames at elevated pressures: Effects of preferential diffusion
K. K. J. Ranga Dinesh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Studies of synergy between metal-support interfaces and selective hydrogenation of HMF to DMF in water
Reena Goyal et al.
JOURNAL OF CATALYSIS (2016)
Use of higher alcohol biofuels in diesel engines: A review
B. Rajesh Kumar et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Review on the production methods and fundamental combustion characteristics of furan derivatives
Nan Xu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
One-Step Continuous Conversion of Fructose to 2,5-Dihydroxymethylfuran and 2,5-Dimethylfuran
Xiaomin Xiang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)
Ignition Characteristics of 2,5-Dimethylfuran Compared with Gasoline and Ethanol
Kotaro Tanaka et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2016)
Comparison of HMF hydrodeoxygenation over different metal catalysts in a continuous flow reactor
Jing Luo et al.
APPLIED CATALYSIS A-GENERAL (2015)
Robust and Recyclable Nonprecious Bimetallic Nanoparticles on Carbon Nanotubes for the Hydrogenation and Hydrogenolysis of 5-Hydroxymethylfurfural
Lili Yu et al.
CHEMCATCHEM (2015)
Electrocatalytic Hydrogenation of 5-Hydroxymethylfurfural in Acidic Solution
Youngkook Kwon et al.
CHEMSUSCHEM (2015)
Current Technologies, Economics, and Perspectives for 2,5-Dimethylfuran Production from Biomass-Derived Intermediates
Basudeb Saha et al.
CHEMSUSCHEM (2015)
Investigation of 2,5-dimethyl furan and iso-octane ignition
Mazen A. Eldeeb et al.
COMBUSTION AND FLAME (2015)
Investigation on the pyrolysis and oxidation of toluene over a wide range conditions. I. Flow reactor pyrolysis and jet stirred reactor oxidation
Wenhao Yuan et al.
COMBUSTION AND FLAME (2015)
Consistent definitions of Flame Displacement Speed and Markstein Length for premixed flame propagation
George K. Giannakopoulos et al.
COMBUSTION AND FLAME (2015)
Investigation on the pyrolysis and oxidation of toluene over a wide range conditions. II. A comprehensive kinetic modeling study
Wenhao Yuan et al.
COMBUSTION AND FLAME (2015)
Experimental and kinetic modeling study of a rich and a stoichiometric low-pressure premixed laminar 2,5-dimethylfuran/oxygen/argon flames
Xinlei Liu et al.
COMBUSTION AND FLAME (2015)
Experimental and Kinetic Study on the Ignition Delay Times of 2,5-Dimethylfuran and the Comparison to 2-Methylfuran and Furan
Nan Xu et al.
ENERGY & FUELS (2015)
Production of 5-hydroxymethylfurfural from Glucose Catalyzed by Acidic Ionic Liquid
P. Wang et al.
ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2015)
Low-temperature ignition behavior of iso-octane
A. B. Mansfield et al.
FUEL (2015)
Rational design of Ni-based catalysts derived from hydrotalcite for selective hydrogenation of 5-hydroxymethylfurfural
Xiao Kong et al.
GREEN CHEMISTRY (2015)
Chemical conversion pathways for carbohydrates
Chandrani Chatterjee et al.
GREEN CHEMISTRY (2015)
Novel aspects in the pyrolysis and oxidation of 2,5-dimethylfuran
Katiuska Alexandrino et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)
Recent progress in the development of biofuel 2,5-dimethylfuran
Yong Qian et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Efficient synthesis of 2,5-dihydroxymethylfuran and 2,5-dimethylfuran from 5-hydroxymethylfurfural using mineral-derived Cu catalysts as versatile catalysts
Yifeng Zhu et al.
CATALYSIS SCIENCE & TECHNOLOGY (2015)
One-flow syntheses of diverse heterocyclic furan chemicals directly from fructose via tandem transformation platform
Guan-Young Jeong et al.
NPG ASIA MATERIALS (2015)
Efficient Preparation of Liquid Fuel 2,5-Dimethylfuran from Biomass-Derived 5-Hydroxymethylfurfural over Ru-NaY Catalyst
Atul S. Nagpure et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
Biomass to Furanics: Renewable Routes to Chemicals and Fuels
Benjamin R. Caes et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2015)
Tailored one-pot production of furan-based fuels from fructose in an ionic liquid biphasic solvent system
Changzhi Li et al.
CHINESE JOURNAL OF CATALYSIS (2015)
Efficient production of the liquid fuel 2,5-dimethylfuran from 5-hydroxymethylfurfural over Ru/Co3O4 catalyst
Yanhong Zu et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2014)
Ultra-high speed imaging and OH-LIF study of DMF and MF combustion in a DISI optical engine
Xiao Ma et al.
APPLIED ENERGY (2014)
Selective hydrogenation of biomass-derived 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) under atmospheric hydrogen pressure over carbon supported PdAu bimetallic catalyst
Shun Nishimura et al.
CATALYSIS TODAY (2014)
Zinc-Assisted Hydrodeoxygenation of Biomass-Derived 5-Hydroxymethylfurfural to 2,5-Dimethylfuran
Basudeb Saha et al.
CHEMSUSCHEM (2014)
Nickel-Tungsten Carbide Catalysts for the Production of 2,5-Dimethylfuran from Biomass- Derived Molecules
Yao-Bing Huang et al.
CHEMSUSCHEM (2014)
Synthesis of 5-Hydroxymethylfurural from Carbohydrates using Large-Pore Mesoporous Tin Phosphate
Arghya Dutta et al.
CHEMSUSCHEM (2014)
Experimental and kinetic modeling study of 2,5-dimethylfuran pyrolysis at various pressures
Zhanjun Cheng et al.
COMBUSTION AND FLAME (2014)
Combustion chemistry and flame structure of furan group biofuels using molecular-beam mass spectrometry and gas chromatography - Part III: 2,5-Dimethylfuran
Casimir Togbe et al.
COMBUSTION AND FLAME (2014)
Combustion chemistry and flame structure of furan,group biofuels using molecular-beam mass spectrometry and gas chromatography - Part I: Furan
Dong Liu et al.
COMBUSTION AND FLAME (2014)
Effects of buffer gas composition on low temperature ignition of iso-octane and n-heptane
Haisheng Di et al.
COMBUSTION AND FLAME (2014)
PRIMARY COMBUSTION INTERMEDIATES IN LOW-PRESSURE PREMIXED LAMINAR 2,5-DIMETHYLFURAN/OXYGEN/ARGON FLAMES
Lixia Wei et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2014)
Reactivity Trends in Furan and Alkyl Furan Combustion
Mazen A. Eldeeb et al.
ENERGY & FUELS (2014)
Interaction between 2,5-Dimethylfuran and Nitric Oxide: Experimental and Modeling Study
Katiuska Alexandrino et al.
ENERGY & FUELS (2014)
Laminar burning characteristics of 2-methylfuran and isooctane blend fuels
Xiao Ma et al.
FUEL (2014)
Hydrogenation of 5-hydroxymethylfurfural in supercritical carbon dioxide-water: a tunable approach to dimethylfuran selectivity
Maya Chatterjee et al.
GREEN CHEMISTRY (2014)
The pyrolysis of 2-methylfuran: a quantum chemical, statistical rate theory and kinetic modelling study
Kieran P. Somers et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Advances and challenges in laminar flame experiments and implications for combustion chemistry
F. N. Egolfopoulos et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2014)
Switchable synthesis of 2,5-dimethylfuran and 2,5-dihydroxymethyltetrahydrofuran from 5-hydroxymethylfurfural over Raney Ni catalyst
Xiao Kong et al.
RSC ADVANCES (2014)
Lignin as co-product of second generation bioethanol production from ligno-cellulosic biomass
Franco Cotana et al.
ATI 2013 - 68TH CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION (2014)
Detailed physical properties prediction of pure methyl esters for biodiesel combustion modeling
H. An et al.
APPLIED ENERGY (2013)
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
Robert-Jan van Putten et al.
CHEMICAL REVIEWS (2013)
A comprehensive experimental and detailed chemical kinetic modelling study of 2,5-dimethylfuran pyrolysis and oxidation
Kieran P. Somers et al.
COMBUSTION AND FLAME (2013)
Electrochemistry for biofuel generation: production of furans by electrocatalytic hydrogenation of furfurals
Peter Nilges et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Laminar Burning Characteristics of 2-Methylfuran Compared with 2,5-Dimethylfuran and Isooctane
Xiao Ma et al.
ENERGY & FUELS (2013)
Comparative Autoignition Trends in Butanol Isomers at Elevated Pressure
Bryan W. Weber et al.
ENERGY & FUELS (2013)
Pyrolysis of furan in a microreactor
Kimberly N. Urness et al.
JOURNAL OF CHEMICAL PHYSICS (2013)
Shock Tube and Chemical Kinetic Modeling Study of the Oxidation of 2,5-Dimethylfuran
Baptiste Sirjean et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2013)
The Effects of Unburned-Gas Temperature and Heat Loss on the Diffusive-Thermal Instability of Premixed Flames
Thwe Thwe Aung et al.
JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY (2013)
Unimolecular decomposition of 2,5-dimethylfuran: a theoretical chemical kinetic study
Baptiste Sirjean et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
The thermal decomposition of 2,5-dimethylfuran
Marko Djokic et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
Hydrogen-assisted isomerizations of fulvene to benzene and of larger cyclic aromatic hydrocarbons
Ahren W. Jasper et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
The reaction of 2,5-dimethylfuran with hydrogen atoms - An experimental and theoretical study
Philipp Friese et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
An experimental investigation on self-acceleration of cellular spherical flames
Fujia Wu et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
A high temperature and atmospheric pressure experimental and detailed chemical kinetic modelling study of 2-methyl furan oxidation
K. P. Somers et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
Theoretical study of the reaction 2,5-dimethylfuran plus H → products
Baptiste Sirjean et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)
Effects of high pressure, high temperature and dilution on laminar burning velocities and Markstein lengths of iso-octane/air mixtures
Benedicte Galmiche et al.
COMBUSTION AND FLAME (2012)
The turbulent flame speed of wrinkled premixed flames
Moshe Matalon et al.
COMPTES RENDUS MECANIQUE (2012)
Primary Combustion Intermediates in Lean and Rich Low-Pressure Premixed Laminar 2-Methylfuran/Oxygen/Argon Flames
Lixia Wei et al.
ENERGY & FUELS (2012)
Laminar Flame Speeds of DMF/Iso-octane-Air-N2/CO2 Mixtures
Qianqian Li et al.
ENERGY & FUELS (2012)
Efficient Production of Furan Derivatives from a Sugar Mixture by Catalytic Process
Junhua Zhang et al.
ENERGY & FUELS (2012)
Laminar burning characteristics of 2,5-dimethylfuran and iso-octane blend at elevated temperatures and pressures
Xuesong Wu et al.
FUEL (2012)
Theoretical Study of the Thermal Decomposition of the 5-Methyl-2-furanylmethyl Radical
Baptiste Sirjean et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2012)
High-Level ab Initio Enthalpies of Formation of 2,5-Dimethylfuran, 2-Methylfuran, and Furan
David Feller et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2012)
MESMER: An Open-Source Master Equation Solver for Multi-Energy Well Reactions
David R. Glowacki et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2012)
On the fundamental lubricity of 2,5-dimethylfuran as a synthetic engine fuel
Enzhu Hu et al.
TRIBOLOGY INTERNATIONAL (2012)
On the chemical kinetics of cyclopentadiene oxidation
R. K. Robinson et al.
COMBUSTION AND FLAME (2011)
Autoignition of n-butanol at elevated pressure and low-to-intermediate temperature
Bryan W. Weber et al.
COMBUSTION AND FLAME (2011)
Laminar burning velocities and flame instabilities of 2,5-dimethylfuran-air mixtures at elevated pressures
Xuesong Wu et al.
COMBUSTION AND FLAME (2011)
Laminar Burning Velocities and Markstein Lengths of 2,5-Dimethylfuran-Air Premixed Flames at Elevated Temperatures
Xuesong Wu et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2011)
Comprehensive Detailed Chemical Kinetic Modeling Study of Toluene Oxidation
W. K. Metcalfe et al.
ENERGY & FUELS (2011)
Ab Initio Study of the Decomposition of 2,5-Dimethylfuran
John M. Simmie et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2011)
Biomasses pyrolysis and combustion kinetics through n-th order parallel reactions
Juan A. Conesa et al.
THERMOCHIMICA ACTA (2011)
Biomass into chemicals: Conversion of sugars to furan derivatives by catalytic processes
Xinli Tong et al.
APPLIED CATALYSIS A-GENERAL (2010)
Laminar Burning Velocities of 2,5-Dimethylfuran Compared with Ethanol and Gasoline
Guohong Tian et al.
ENERGY & FUELS (2010)
A two-step approach for the catalytic conversion of glucose to 2,5-dimethylfuran in ionic liquids
Mandan Chidambaram et al.
GREEN CHEMISTRY (2010)
Technology development for the production of biobased products from biorefinery carbohydrates-the US Department of Energy's Top 10 revisited
Joseph J. Bozell et al.
GREEN CHEMISTRY (2010)
Spray Characteristics Study of DMF Using Phase Doppler Particle Analyzer
Guohong Tian et al.
SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS (2010)
Identification of combustion intermediates in a low-pressure premixed laminar 2,5-dimethylfuran/oxygen/argon flame with tunable synchrotron photoionization
Xuesong Wu et al.
COMBUSTION AND FLAME (2009)
Measurements of Laminar Burning Velocities and Markstein Lengths of 2,5-Dimethylfuran-Air-Diluent Premixed Flames
Xuesong Wu et al.
ENERGY & FUELS (2009)
Ionization of 2,5-dimethylfuran by electron impact and resulting ion-parent molecule reactions
C. Q. Jiao et al.
JOURNAL OF APPLIED PHYSICS (2009)
Formation Enthalpies and Bond Dissociation Energies of Alkylfurans. The Strongest C-X Bonds Known?
John M. Simmie et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2009)
Simple Chemical Transformation of Lignocellulosic Biomass into Furans for Fuels and Chemicals
Joseph B. Binder et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Kinetic modeling of the benzyl + HO2 reaction
Gabriel da Silva et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Dimethyl ether autoignition in a rapid compression machine: Experiments and chemical kinetic modeling
Gaurav Mittal et al.
FUEL PROCESSING TECHNOLOGY (2008)
Theoretical study of the benzyl plus O2 reaction:: Kinetics, mechanism, and product branching ratios
Yoshinori Murakami et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2007)
Autoignition of toluene and benzene at elevated pressures in a rapid compression machine
Gaurav Mittal et al.
COMBUSTION AND FLAME (2007)
On transition to cellularity in expanding spherical flames
G. Jomaas et al.
JOURNAL OF FLUID MECHANICS (2007)
Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates
Yuriy Roman-Leshkov et al.
NATURE (2007)
Cellular instabilities of expanding hydrogen/propane spherical flames at elevated pressures: theory and experiment
CK Law et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2005)
Oxidation and combustion of low alkylbenzenes at high pressure: Comparative reactivity and auto-ignition
A Roubaud et al.
COMBUSTION AND FLAME (2000)
Pyrolysis of furan: Ab initio quantum chemical and kinetic modeling studies
K Sendt et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2000)
Morphology and burning rates of expanding spherical flames in H-2/O-2/inert mixtures up to 60 atmospheres
SD Tse et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2000)
分享论文
