相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A new nonlinear formulation-based prediction approach using artificial neural network (ANN) model for rubberized cement composite
Mostafa Jalal et al.
ENGINEERING WITH COMPUTERS (2022)
A hybrid model for predicting the axial compression capacity of square concrete-filled steel tubular columns
Sy Hung Mai et al.
ENGINEERING WITH COMPUTERS (2022)
ANN optimized by PSO and Firefly algorithms for predicting scour depths around bridge piers
Nguyen Mai Dang et al.
ENGINEERING WITH COMPUTERS (2021)
A holistic review on artificial intelligence techniques for well placement optimization problem
Jahedul Islam et al.
ADVANCES IN ENGINEERING SOFTWARE (2020)
Shear strength of SFRCB without stirrups simulation: implementation of hybrid artificial intelligence model
Abeer A. Al-Musawi et al.
ENGINEERING WITH COMPUTERS (2020)
Compressive strength of Foamed Cellular Lightweight Concrete simulation: New development of hybrid artificial intelligence model
Ali Ashrafian et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
New empirical methods for predicting flexural capacity and stiffness of CFST beam
Ahmed W. Al Zand et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)
Flexural performance of square concrete-filled steel tube beams stiffened with V-shaped grooves
Ahmed W. Al Zand et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2020)
Development of gravitational search algorithm model for predicting packing density of cementitious pastes
Qais S. Banyhussan et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Performance evaluation of recycled aggregate concrete-filled steel tubes under different loading conditions: Database analysis and modelling
Jinjun Xu et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Transverse impact behavior of high-strength concrete filled normal-/high-strength square steel tube columns
Xiaoqiang Yang et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)
Structural identification in long-term deformation characteristic of dam foundation using meta-heuristic optimization techniques
Chaoning Lin et al.
ADVANCES IN ENGINEERING SOFTWARE (2020)
Three hybrid intelligent models in estimating flyrock distance resulting from blasting
Mohammadreza Koopialipoor et al.
ENGINEERING WITH COMPUTERS (2019)
Shear strength of steel fiber-unconfined reinforced concrete beam simulation: Application of novel intelligent model
Behrooz Keshtegar et al.
COMPOSITE STRUCTURES (2019)
Post-cracking behavior of hybrid fiber-reinforced concrete-filled steel tube beams
Soner Guler et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Load-carrying capacity and mode failure simulation of beam-column joint connection: Application of self-tuning machine learning model
Afrah Abdulelah Hamzah Alwanas et al.
ENGINEERING STRUCTURES (2019)
Prediction of shear strength for squat RC walls using a hybrid ANN-PSO model
X. L. Chen et al.
ENGINEERING WITH COMPUTERS (2018)
Predicting compressive strength of lightweight foamed concrete using extreme learning machine model
Zaher Mundher Yaseen et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
Flexural Behavior of CFST Beams Partially Strengthened with Unidirectional CFRP Sheets: Experimental and Theoretical Study
Ahmed W. Al Zand et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)
Flexural behaviour of steel hollow sections filled with concrete that contains OPBC as coarse aggregate
Muhammad Faisal Javed et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)
Experimental and numerical study of flexural behavior of novel oil palm concrete filled steel tube exposed to elevated temperature
Muhammad Faisal Javed et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Flexural behavior of lightweight concrete and self-compacting concrete-filled steel tube beams
Ahmed A. M. Al-Shaar et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2018)
Shear strength prediction of steel fiber reinforced concrete beam using hybrid intelligence models: A new approach
Zaher Mundher Yaseen et al.
ENGINEERING STRUCTURES (2018)
Energy absorption evaluation of reinforced concrete beams under various loading rates based on particle swarm optimization technique
Ammar N. Hanoon et al.
ENGINEERING OPTIMIZATION (2017)
Experimental investigation of cementitious material-filled square thin-walled steel beams
M. F. Hassanein et al.
THIN-WALLED STRUCTURES (2017)
Rehabilitation and strengthening of high-strength rectangular CFST beams using a partial wrapping scheme of CFRP sheets: Experimental and numerical study
Ahmed W. Al Zand et al.
THIN-WALLED STRUCTURES (2017)
FE modelling of the flexural behaviour of square and rectangular steel tubes filled with normal and high strength concrete
Muhammad Faisal Javed et al.
THIN-WALLED STRUCTURES (2017)
Strut-and-tie model for externally bonded CFRP-strengthened reinforced concrete deep beams based on particle swarm optimization algorithm: CFRP debonding and rupture
Ammar N. Hanoon et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The enhanced performance of CFST beams using different strengthening schemes involving unidirectional CFRP sheets: An experimental study
Ahmed W. Al Zand et al.
ENGINEERING STRUCTURES (2016)
Flexural behaviour of concrete filled steel tubular (CFST) chord to hollow tubular brace truss: experiments
Lin-Hai Han et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)
Fault diagnosis on beam-like structures from modal parameters using artificial neural networks
S. J. S. Hakim et al.
MEASUREMENT (2015)
Modelling of recycled aggregate concrete-filled steel tube (RACFST) beam-columns subjected to cyclic loading
You-Fu Yang
STEEL AND COMPOSITE STRUCTURES (2015)
A review of soft computing technology applications in several mining problems
Hyongdoo Jang et al.
APPLIED SOFT COMPUTING (2014)
Behavior of concrete-filled steel tubular stub columns and beams using dune sand as part of fine aggregate
Wei-Hua Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Tests on elliptical concrete filled steel tubular (CFST) beams and columns
Qing-Xin Ren et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2014)
Analysis of a variable speed vapor compression system using artificial neural networks
J. M. Belman-Flores et al.
EXPERT SYSTEMS WITH APPLICATIONS (2013)
An artificial neural network approach to the problem of wireless sensors network localization
M. Gholami et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2013)
A hybrid CSS and PSO algorithm for optimal design of structures
A. Kaveh et al.
STRUCTURAL ENGINEERING AND MECHANICS (2013)
Experimental behaviour of recycled aggregate concrete filled stainless steel tube stub columns and beams
You-Fu Yang et al.
THIN-WALLED STRUCTURES (2013)
Analytical modeling of bending of circular concrete-filled steel tubes
Jiho Moon et al.
ENGINEERING STRUCTURES (2012)
Flexural behaviour of square UHPC-filled hollow steel section beams
Soner Guler et al.
STRUCTURAL ENGINEERING AND MECHANICS (2012)
Simple yet accurate prediction method for sublimation enthalpies of organic contaminants using their molecular structure
Mehdi Bagheri et al.
THERMOCHIMICA ACTA (2012)
Mixed variable structural optimization using Firefly Algorithm
Amir Hossein Gandomi et al.
COMPUTERS & STRUCTURES (2011)
A hybrid computational approach to derive new ground-motion prediction equations
Amir Hossein Gandomi et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2011)
Behavior of CFST short column and beam with initial concrete imperfection: Experiments
Fei-Yu Liao et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2011)
Composite Flexural Behavior of Full-Scale Concrete-Filled Tubes without Axial Loads
Aaron D. Probst et al.
JOURNAL OF STRUCTURAL ENGINEERING (2010)
GSA: A Gravitational Search Algorithm
Esmat Rashedi et al.
INFORMATION SCIENCES (2009)
Strength deformation behaviour of circular concrete filled steel tubes subjected to pure bending
Manojkumar V. Chitawadagi et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2009)
Analytical behavior of circular concrete-filled thin-walled steel tubes subjected to bending
Hui Lu et al.
THIN-WALLED STRUCTURES (2009)
On some aspects of variable selection for partial least squares regression models
Partha Pratim Roy et al.
QSAR & COMBINATORIAL SCIENCE (2008)
Compressive and flexural behaviour of CFRP-repaired concrete-filled steel tubes after exposure to fire
Zhong Tao et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2007)
An integrated approach for optimum design of bridge decks using genetic algorithms and artificial neural networks
V. Srinivas et al.
ADVANCES IN ENGINEERING SOFTWARE (2007)
Compressive and flexural behaviour of recycled aggregate concrete filled steel tubes (RACFST) under short-term loadings
You-Fu Yang et al.
STEEL AND COMPOSITE STRUCTURES (2006)
Further study on the flexural behaviour of concrete-filled steel tubes
LH Han et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2006)
Dynamic fuzzy wavelet neural network model for structural system identification
H Adeli et al.
JOURNAL OF STRUCTURAL ENGINEERING (2006)
Dynamic wavelet neural network for nonlinear identification of highrise buildings
XM Jiang et al.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2005)
Flexural behaviour of concrete-filled steel tubes
LH Han
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2004)
Flexural behaviour of high-strength rectangular concrete-filled steel hollow sections
WM Gho et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2004)
New technologies of steel/concrete composite bridges
S Nakamura et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2002)
Concrete-filled circular steel tubes subjected to pure bending
M Elchalakani et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2001)