相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Investigation of subsurface fatigue crack growth behavior of D2 tool steel (JIS SKD11) based on a novel measurement method
K. Masuda et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Ductile fracture of AISI 304L stainless steel sheet in stretching
Khadija Ben Othmen et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Three-dimensional exact solutions of transversely isotropic coated structures under tilted circular flat punch contact
Peng-Fei Hou et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Evaluation of multiaxial creep and damage evolution for small punch creep test considering critical-strain criterion
Sisheng Yang et al.
ENGINEERING FAILURE ANALYSIS (2018)
Mechanistic modelling for predicting cutting forces in machining considering effect of tool nose radius on chip formation and tool wear land
Kashfull Orra et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Failure analysis of a cold work tool material slides against carbon steel in sheet metal forming process - A case study of hinges production
Wissal Yangui et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
On the analytical and finite element solution of plane contact problem of a rigid cylindrical punch sliding over a functionally graded orthotropic medium
M. A. Guler et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)
Local cementite cracking induced by heterogeneous plastic deformation in lamellar pearlite
Toshihiko Teshima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure, Hardness, and Residual Stress Distributions in T-Joint Weld of HSLA S500MC Steel
Intissar Frih et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Hammer premature wear in mineral crushing process
Mouna Kallel et al.
TRIBOLOGY INTERNATIONAL (2017)
Modeling of fracture in small punch tests for small- and large-scale yielding conditions at various temperatures
C. Soyarslan et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Damage of Stainless Steel Components by Olive Paste
Fatma Ben Saada et al.
TRIBOLOGY TRANSACTIONS (2016)
Influence of Microstructure on Strength and Ductility in Fully Pearlitic Steels
Jesus Toribio et al.
METALS (2016)
Effects of shearing parameters on cutting characteristics of polycarbonate sheet subjected to straight punch/die shearing
Pusit Mitsomwang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Tribological performance of TiN coatings deposited on 304 L stainless steel used for olive-oil extraction
Amir Bahri et al.
WEAR (2015)
Experimental and numerical analysis of micromechanical damage in the punching process for High-Strength Low-Alloy steels
Mohamed Achouri et al.
MATERIALS & DESIGN (2014)
WELDABILITY OF S500MC STEEL IN UNDERWATER CONDITIONS
D. Fydrych et al.
ADVANCES IN MATERIALS SCIENCE (2014)
The behaviour of the carbides of ledeburitic AISI D2 tool steel during multiple hot deformation cycles
T. Vecko Pirtovsek et al.
MATERIALS CHARACTERIZATION (2013)
Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment
R. S. Coelho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of Convex Sheared Punch Geometry on Cutting Force of Ultra-High-Strength Steel
Karl Kutuniva et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Flow characteristics of continuous shear drawing of high carbon steel
S. K. Hwang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2011)
Experimental investigation of the cutting force reduction during the blanking operation of AHSS sheet materials
A. Mackensen et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Relationship between the Punch-Die Clearance and Shearing Quality of Progressive Shearing Die
Ship-Peng Lo et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Sub-zero treatments of AISI D2 steel: Part II. Wear behavior
Debdulal Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Sub-zero treatments of AISI D2 steel: Part I. Microstructure and hardness
Debdulal Das et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Influence of tool steel microstructure on origin of galling initiation and wear mechanisms under dry sliding against a carbon steel sheet
A. Gaard et al.
WEAR (2009)
Influence of varied cryotreatment on the wear behavior of AISI D2 steel
D. Dasa et al.
WEAR (2009)
Microstructure evolution of a pearlitic steel during hot deformation of undercooled austenite and subsequent annealing
Longfei Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Characterization of the contact between a punch and a half-infinite substrate in a fretting situation
L. Bohorquez et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2007)
Galling resistance and wear mechanisms - cold work tool materials sliding against carbon steel sheets
A. Gaard et al.
TRIBOLOGY LETTERS (2007)
Identification of ductile damage and fracture parameters from the small punch test using neural networks
M Abendroth et al.
ENGINEERING FRACTURE MECHANICS (2006)
Optimisation of springback predicted by experimental and numerical approach by using response surface methodology
R Bahloul et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
An experimental study for the effect of different clearances on burr, smooth-sheared and blanking force on aluminium sheet metal
Zafer Tekiner et al.
MATERIALS & DESIGN (2006)
Wear behaviour on the radius portion of a die in deep-drawing: Identification, localisation and evolution of the surface damage
C Boher et al.
WEAR (2005)
Numerical evaluation of the tool wear influence on mtal-punching processes
R Hambli et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2003)