相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study
Marcel Reymus et al.
CLINICAL ORAL INVESTIGATIONS (2020)
Assessment of the internal fit and marginal integrity of interim crowns made by different manufacturing methods
Chin-Chun Peng et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Mechanical properties, accuracy, and cytotoxicity of UV-polymerized 3D printing resins composed of Bis-EMA, UDMA, and TEGDMA
Chih-Hsin Lin et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Digital dentistry: The new state of the art - Is it disruptive or destructive?
E. Dianne Rekow
DENTAL MATERIALS (2020)
Combining 3D-printed metal and resin for digitally fabricated dentures: A dental technique
Chan Park et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Wear resistance of 3D-printed denture tooth resin opposing zirconia and metal antagonists
Hyun-Suk Cha et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Color dimensions of additive manufactured interim restorative dental material
Marta Revilla-Leon et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Assessment of the Adaptation of Interim Crowns using Different Measurement Techniques
Chin-Chun Peng et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2020)
The digital factory in both the modern dental lab and clinic
David Leeson
DENTAL MATERIALS (2020)
Load-bearing capacity of CAD/CAM 3D-printed zirconia, CAD/CAM milled zirconia, and heat-pressed lithium disilicate ultra-thin occlusal veneers on molars
A. Ioannidis et al.
DENTAL MATERIALS (2020)
Cyclic contact fatigue resistance of ceramics for monolithic and multilayer dental restorations
Rodrigo Alessandretti et al.
DENTAL MATERIALS (2020)
Edge chipping test in dentistry: A comprehensive review
Suzane Boa Nova Brandeburski et al.
DENTAL MATERIALS (2020)
Digitally Fabricated Immediate Complete Dentures: Case Reports of Milled and Printed Dentures
Carlos Alberto Jurado et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2020)
Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations
Ji Suk Shim et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
A 3D printing replication technique for fabricating digital dentures
Yukihiro Takeda et al.
JOURNAL OF PROSTHETIC DENTISTRY (2020)
Evaluation of the effects of polishing systems on surface roughness and morphology of dental composite resin
Julie Wheeler et al.
BRITISH DENTAL JOURNAL (2020)
Stereolithographic Additive Manufacturing of High Precision Glass Ceramic Parts
Julia Anna Schoenherr et al.
MATERIALS (2020)
Dental ceramic prostheses by stereolithography-based additive manufacturing: potentials and challenges
Hezhen Li et al.
ADVANCES IN APPLIED CERAMICS (2019)
Trueness analysis of zirconia crowns fabricated with 3-dimensional printing
Weina Wang et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
Layered Manufacturing of Dental Ceramics: Fracture Mechanics, Microstructure, and Elemental Composition of Lithography-Sintered Ceramic
Yurdanur Ucar et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)
Effect of the volume fraction of zirconia suspensions on the microstructure and physical properties of products produced by additive manufacturing
Kyoung-Jun Jong et al.
DENTAL MATERIALS (2019)
CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: An in vitro evaluation of trueness
Nicole Kalberer et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
Strength and Adaptation of Stereolithography-Fabricated Zirconia Dental Crowns: An In Vitro Study
Rong Li et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2019)
Fracture Resistance of Additively Manufactured Zirconia Crowns when Cemented to Implant Supported Zirconia Abutments: An in vitro Study
Amirali Zandinejad et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)
Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness
Moritz Zimmermann et al.
CLINICAL ORAL INVESTIGATIONS (2019)
Three-body wear of 3D printed temporary materials
Andreas Kessler et al.
DENTAL MATERIALS (2019)
3D printing dental composite resins with sustaining antibacterial ability
Liu Sa et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method
Suji Lee et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2019)
3D printed versus conventionally cured provisional crown and bridge dental materials
Anthony Tahayeri et al.
DENTAL MATERIALS (2018)
Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing three-dimensional printer: A proof-of-concept technique
Wei-Shao Lin et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
Wear Resistance of 3D Printing Resin Material Opposing Zirconia and Metal Antagonists
Ji-Man Park et al.
MATERIALS (2018)
Three-dimensional evaluation of marginal and internal fit of 3D-printed interim restorations fabricated on different finish line designs
Nawal Alharbi et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2018)
Influence of light-cured luting agents and associated factors on the color of ceramic laminate veneers: A systematic review of in vitro studies
Ana Paula Perroni et al.
DENTAL MATERIALS (2018)
3D Printing of Resin Material for Denture Artificial Teeth: Chipping and Indirect Tensile Fracture Resistance
Yoo-Jin Chung et al.
MATERIALS (2018)
A study on the machining accuracy of dental digital method focusing on dental inlay
Eun-Jeong Bae et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2018)
Objects build orientation, positioning, and curing influence dimensional accuracy and flexural properties of stereolithographically printed resin
Alexey Unkovskiy et al.
DENTAL MATERIALS (2018)
A Study of 3D-Printable Reinforced Composite Resin: PMMA Modified with Silver Nanoparticles Loaded Cellulose Nanocrystal
Shenggui Chen et al.
MATERIALS (2018)
Carboxylic acid-functionalized TiO2 nanoparticle-loaded PMMA/PEEK copolymer matrix as a dental resin for 3D complete denture manufacturing by stereolitographic technique
Shenggui Chen et al.
INTERNATIONAL JOURNAL OF FOOD PROPERTIES (2018)
3D PRINTING - AN ALTERNATIVE OF CONVENTIONAL CROWN FABRICATION: A CASE REPORT
Iveta Katreva et al.
JOURNAL OF IMAB (2018)
Build Angle: Does It Influence the Accuracy of 3D-Printed Dental Restorations Using Digital Light-Processing Technology?
Reham Osman et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2017)
Poly(methyl methacrylate) with TiO2 nanoparticles inclusion for stereolitographic complete denture manufacturing - the fututre in dental care for elderly edentulous patients?
Eugenia Eftimie Totu et al.
JOURNAL OF DENTISTRY (2017)
A comparative study of additive and subtractive manufacturing for dental restorations
Eun-Jeong Bae et al.
JOURNAL OF PROSTHETIC DENTISTRY (2017)
Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system
Wan-Sun Lee et al.
JOURNAL OF ADVANCED PROSTHODONTICS (2017)
Stereolithography: A new method for processing dental ceramics by additive computer-aided manufacturing
Marion Dehurtevent et al.
DENTAL MATERIALS (2017)
Reliability and mode of failure of bondedmonolithic monolithic and multilayer ceramics
Rodrigo Alessandretti et al.
DENTAL MATERIALS (2017)
Influence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography
Emil Johansson et al.
MATERIALS (2017)
Reliability and failure behavior of CAD-on fixed partial dentures
G. R. Basso et al.
DENTAL MATERIALS (2016)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
Factors Influencing the Dimensional Accuracy of 3D-Printed Full-Coverage Dental Restorations Using Stereolithography Technology
Nawal Alharbi et al.
INTERNATIONAL JOURNAL OF PROSTHODONTICS (2016)
Complete-mouth rehabilitation using a 3D printing technique and the CAD/CAM double scanning method: A clinical report
Han-Sung Joo et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations
Nawal Alharbi et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Lifetime comparison of Y-TZP/porcelain crowns under different loading conditions
P. H. Corazza et al.
JOURNAL OF DENTISTRY (2015)
Fabricating Complete Dentures with CAD/CAM and RP Technologies
Mehmet Selim Bilgin et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2015)
Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015 statement
David Moher et al.
SYSTEMATIC REVIEWS (2015)
Trends in Computer-Aided Manufacturing in Prosthodontics: A Review of the Available Streams
Jaafar Abduo et al.
INTERNATIONAL JOURNAL OF DENTISTRY (2014)
Evaluation of marginal and internal fit of ceramic crown copings
Juliana Tereza Colpani et al.
DENTAL MATERIALS (2013)
The future of dental devices is digital
Richard van Noort
DENTAL MATERIALS (2012)
Effects of environmental conditions, aging, and build orientations on the mechanical properties of ASTM type I specimens manufactured via stereolithography
Karina Puebla et al.
RAPID PROTOTYPING JOURNAL (2012)
A review on stereolithography and its applications in biomedical engineering
Ferry P. W. Melchels et al.
BIOMATERIALS (2010)
Preferred Reporting Items for Systematic Reviews and Meta-Analyses: The PRISMA Statement
David Moher et al.
PLOS MEDICINE (2009)
Stereolithography of structural complex ceramic parts
T Chartier et al.
JOURNAL OF MATERIALS SCIENCE (2002)