期刊
CONSTRUCTION AND BUILDING MATERIALS
卷 274, 期 -, 页码 -出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.conbuildmat.2020.122098
关键词
Siliceous sea-sand; Coral sand; Seawater; Concrete; Marine environment; Mechanicalcharacteristics
资金
- National Natural Science Foundation of China [52079047, 51479048]
- Science and Technology Program of Water Resources Allocation Project in the Pearl River Delta [CD88-GC02-2020-0033]
- Postgraduate Research & Practice Innovation Program of Jiangsu Province [KYZZ16_0274]
In the marine environment, sea-sand concrete is susceptible to seawater erosion. Dry-wet cycles cause changes in the dynamic modulus and mass of concrete, with a more significant increase in water absorption for concretes with higher initial strength.
In the marine environment, concrete in both submerged zone and non-submerged zone could be attacked by seawater. To study the deterioration of sea-sand concrete partially submerged in seawater, an accelerated test with simulated marine environment was designed for seawater and siliceous sea-sand concrete (SSC), coral aggregate seawater concrete (CASC) and tap water and desalted siliceous sea-sand concrete (DTC). The mass, water absorption, mechanical properties (compressive strength and dynamic modulus) were tested. Thermodynamic simulation, EDS and MIP test were used to analyze the strength deterioration of different sea-sand concrete. With the dry-wet cycle, the dynamic modulus and mass of sea-sand concrete increased first and then decreased. After 365 days of dry-wet cycles, the water absorption of sea-sand concrete with high initial strength would increase more significantly. Different sea-sand concrete in the submerged zone and the non-submerged zone was mainly subjected to chemical seawater attack, and ettringite and gypsum were the main expansion phases. The most important influence of internal sea salt attack from mixing materials on the deterioration of concrete partially submerged in seawater was the change of pore distribution. Due to the combined effect of capillary transport and crystallization pressure, SSC and CASC with higher initial compressive strength had greater compressive strength loss in the submerged zone. In the non-submerged zone, under the combined action of capillary transport, crystallization pressure and wick action, the compressive strength of SSC, CASC and DTC varied with height in an S, parabolic and linear shape, respectively. (C) 2020 Elsevier Ltd. All rights reserved.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据