相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Low-velocity impact behavior of flexible sandwich composite with polyurethane grid sealing shear thickening fluid core
Liwei Wu et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2020)
Progress of novel techniques for lightweight automobile applications through innovative eco-friendly composite materials: A review
Jyoti Agarwal et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2020)
Carbon/glass hybrid composite laminates in vinylester resin: Bending and low velocity impact tests
I Papa et al.
COMPOSITE STRUCTURES (2020)
Physical-mechanical properties of bamboo fibers-reinforced biocomposites: Influence of surface treatment of fibers
Martha L. Sanchez et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Investigation of Silica-Based Shear Thickening Fluid in Enhancing Composite Impact Resistance
F. Rizzo et al.
APPLIED COMPOSITE MATERIALS (2020)
Mode II interlaminar fracture of hybrid woven carbon-Dyneema composites
H. X. Zhou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Comparative mechanical properties between biocomposites of Epoxy and polyester matrices reinforced by hemp fiber
Anna Carolina C. Neves et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Characterisation of Natural Fibres for Sustainable Discontinuous Fibre Composite Materials
Ali Kandemir et al.
MATERIALS (2020)
Impact behaviour of a novel composite structure made of a polymer reinforced composite with a 3D printed metallic coating
I Papa et al.
COMPOSITE STRUCTURES (2020)
Impact response of shear thickening fluid filled polyurethane foam core sandwich composites
Cigdem Caglayan et al.
COMPOSITE STRUCTURES (2020)
Effect of fabric architecture on the shear and impact properties of natural fibre reinforced composites
Habib Awais et al.
COMPOSITES PART B-ENGINEERING (2020)
Mechanical, low-velocity impact, and hydrothermal aging properties of flax/carbon hybrid composite plates
Anni Wang et al.
POLYMER TESTING (2020)
Low velocity impact response of flax/polypropylene hybrid roving based woven fabric composites: Where does it stand with respect to GRPC?
Mahadev Bar et al.
POLYMER TESTING (2020)
Development of hybrid metallic coatings on carbon fiber-reinforced polymers (CFRPs) by cold spray deposition of copper-assisted copper electroplating process
Panteha Fallah et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Incorporation of shear thickening fluid effects into computational modelling of woven fabrics subjected to impact loading: A review
Dakshitha Weerasinghe et al.
INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2020)
Utilizing vacuum bagging process to prepare carbon fiber/epoxy composites with improved mechanical properties
B. Muralidhara et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Z-pin insertion process for through-thickness reinforced thermoplastic composites
Julian Hoffmann et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Replacing stitching and weaving in natural fiber reinforcement manufacturing, part 1: mechanical behavior of unidirectional flax fiber composites
Mohamed Habibi et al.
JOURNAL OF NATURAL FIBERS (2019)
Bast fibres: structure, processing, properties, and applications
Vahid Sadrmanesh et al.
INTERNATIONAL MATERIALS REVIEWS (2019)
Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite
Yann Lebaupin et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites
Yucheng Liu et al.
TRIBOLOGY INTERNATIONAL (2019)
Effect of Temperature and Water Absorption on Low-Velocity Impact Damage of Composites with Multi-Layer Structured Flax Fiber
Yiou Shen et al.
MATERIALS (2019)
Physical and Chemical Modifications of Plant Fibres for Reinforcement in Cementitious Composites
R. Ahmad et al.
ADVANCES IN CIVIL ENGINEERING (2019)
Impact and damage tolerance of shear thickening fluids-impregnated carbon and glass fabric composites
Erdem Selver
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Hybrid composites for automotive applications - A review
B. Ravishankar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2019)
Theoretical assessment of the elastic modulus of natural fiber-based intra-ply hybrid composites
S. Budhe et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fibre woven composites: Failure mechanism evaluation using acoustic emission analysis
El Hadi Saidane et al.
POLYMER TESTING (2019)
Low velocity impact behaviour and post-impact characteristics of kenaf/glass hybrid composites with various weight ratios
Muhammad F. Ismail et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Evaluation of ballistic performance of STF impregnated fabrics under high velocity impact
Zhenqian Lu et al.
COMPOSITE STRUCTURES (2019)
Parameters influencing the impact response of fiber-reinforced polymer matrix composite materials: A critical review
J. Jefferson Andrew et al.
COMPOSITE STRUCTURES (2019)
Natural Fibers as Sustainable and Renewable Resource for Development of Eco-Friendly Composites: A Comprehensive Review
Yashas Gowda Thyavihalli Girijappa et al.
FRONTIERS IN MATERIALS (2019)
Damage investigation and assessment due to low-velocity impact on flax/glass hybrid composite plates
Antigoni K. Barouni et al.
COMPOSITE STRUCTURES (2019)
Mechanical characterization of intralaminar natural fibre-reinforced hybrid composites
D. K. K. Cavalcanti et al.
COMPOSITES PART B-ENGINEERING (2019)
Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres
Dongdong Chen et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites
Tolera A. Negawo et al.
COMPOSITE STRUCTURES (2019)
Effect of chemical treatment on the thermal properties of hybrid natural fiber-reinforced composites
J. S. S. Neto et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Numerical investigation of ballistic performance of shear thickening fluid (STF)-Kevlar composite
Subhajit Sen et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Recent progress on natural fiber hybrid composites for advanced applications: A review
M. J. Mochane et al.
EXPRESS POLYMER LETTERS (2019)
Flexural and energy absorption properties of natural-fiber reinforced composites with a novel fabrication technique
Shuai Li et al.
COMPOSITES COMMUNICATIONS (2019)
Hydrophobic treatment of natural fibers and their compositesA review
Azam Ali et al.
JOURNAL OF INDUSTRIAL TEXTILES (2018)
Metallization of Various Polymers by Cold Spray
Hanqing Che et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
The influence of surface treatment on the tensile and tribological properties of wood fiber-reinforced polyimide composite
Du Gang
SURFACE AND INTERFACE ANALYSIS (2018)
Effect of Curing Temperature on Mechanical Properties of Natural Fiber Reinforced Polymer Composites
Jai Inder Preet Singh et al.
JOURNAL OF NATURAL FIBERS (2018)
Structural design and test of automobile bonnet with natural flax composite through impact damage analysis
Gilsu Park et al.
COMPOSITE STRUCTURES (2018)
Properties of flax-polypropylene composites made through hybrid yarn and film stacking methods
Mahadev Bar et al.
COMPOSITE STRUCTURES (2018)
Impact behaviour of hybrid composites for structural applications: A review
Syafiqah Nur Azrie Safri et al.
COMPOSITES PART B-ENGINEERING (2018)
Effects of hybridization and hybrid fibre dispersion on the mechanical properties of woven flax-carbon epoxy at low carbon fibre volume fractions
Umeyr Kureemun et al.
COMPOSITES PART B-ENGINEERING (2018)
Impact response of hybrid carbon/glass fibre reinforced polymer composites designed for engineering applications
Pui-yan Hung et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical and impact characterisation of flax and basalt fibre vinylester composites and their hybrids
Cristiano Fragassa et al.
COMPOSITES PART B-ENGINEERING (2018)
Impact behaviour of hybrid basalt/flax twill laminates
I. Papa et al.
COMPOSITES PART B-ENGINEERING (2018)
Investigation into Mode II interlaminar fracture toughness characteristics of flax/basalt reinforced vinyl ester hybrid composites
F. A. Almansour et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Low-velocity impact behaviour of a shear thickening fluid (STF) and STF-filled sandwich composite panels
Kunkun Fu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Numerical evaluation of time-dependent sagging for low density polyurethane foams to apply the long-term driving comfort on the seat cushion design
Dae Young Kim et al.
INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS (2018)
Study of the Production of a Metallic Coating on Natural Fiber Composite Through the Cold Spray Technique
Antonello Astarita et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Metallization of polyether ether ketone (PEEK) by copper coating via cold spray
Chaoyue Chen et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Interlaminar fracture toughness of hybrid woven carbon-Dyneema composites
Y. Zhao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Effect of Z-pinning on the impact resistance of composite laminates with different layups
L. Francesconi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
A Review of the Impact Performance of Natural Fiber Thermoplastic Composites
James L. Thomason et al.
FRONTIERS IN MATERIALS (2018)
Low-Velocity Impact Behavior of Interlayer/Intralayer Hybrid Composites Based on Carbon and Glass Non-Crimp Fabric
Chen Zhang et al.
MATERIALS (2018)
Tensile and impact properties of cost-effective hybrid fiber metal laminate sandwich structures
Sivakumar Dhar Malingam et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
An Experimental Study on Sisal/Hemp Fiber Reinforced Hybrid Composites
Akash et al.
MATERIALS TODAY-PROCEEDINGS (2018)
The effects of alkali treatment on the mechanical and chemical properties of pineapple leaf fibres (PALF) and adhesion to epoxy resin
M. H. Zin et al.
WOOD AND BIOFIBER INTERNATIONAL CONFERENCE (WOBIC 2017) (2018)
Experimental Study of The Mechanical Properties of Banana Fiber and Groundnut Shell Ash Reinforced Epoxy Hybrid Composite
A. Lakshumu Naidu et al.
INTERNATIONAL JOURNAL OF ENGINEERING (2018)
Design and Manufacturing of a Novel Shear Thickening Fluid Composite (STFC) with Enhanced out-of-Plane Properties and Damage Suppression
F. Pinto et al.
APPLIED COMPOSITE MATERIALS (2017)
Interlaminar fracture toughness of flax-epoxy composites
F. Bensadoun et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)
Response of glass fiber-reinforced hybrid shear thickening fluid (STF) under low-velocity impact
Esmael Balali et al.
JOURNAL OF THE TEXTILE INSTITUTE (2017)
Effect of a Superabsorbent for the Improvement of Car Seat Thermal Comfort
Funda Buyuk Mazari et al.
FIBRES & TEXTILES IN EASTERN EUROPE (2017)
Hemp fiber reinforced thermoplastic polyurethane composite: An investigation in mechanical properties
Tina Haghighatnia et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties
Ahmed Edhirej et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)
Metallization of carbon fibre reinforced polymers by cold spray
Hanqing Che et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Numerical and experimental investigations into the response of STF-treated fabric composites undergoing ballistic impact
Mandi Hasanzadeh et al.
THIN-WALLED STRUCTURES (2017)
Experimental Investigation on Jute/Carbon Fibre reinforced Epoxy based Hybrid Composites
M. Venkata Ramana et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Mechanical and impact characterization of hybrid composite laminates with carbon, basalt and flax fibres
E. Nisini et al.
COMPOSITES PART B-ENGINEERING (2017)
Low velocity impact performance of stitched flax/epoxy composite laminates
M. Ravandi et al.
COMPOSITES PART B-ENGINEERING (2017)
Impact Response of Shear Thickening Fluid (STF) Treated High Strength Polymer Composites - Effect of STF Intercalation Method
Neelanchali Asija et al.
PLASTICITY AND IMPACT MECHANICS (2017)
Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites
F. A. Almansour et al.
COMPOSITE STRUCTURES (2017)
Influence of moisture absorption on the impact properties of flax, basalt and hybrid flax/basalt fiber reinforced green composites
Irena Zivkovic et al.
COMPOSITES PART B-ENGINEERING (2017)
High velocity impact behaviour of hybrid basalt-carbon/epoxy composites
J. Tirillo et al.
COMPOSITE STRUCTURES (2017)
Thermoplastic polyurethane/glass fabric composite laminates: Low velocity impact behavior under extreme temperature conditions
Pietro Russo et al.
COMPOSITE STRUCTURES (2017)
Effect of water absorption on the mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites
A. B. Maslinda et al.
COMPOSITE STRUCTURES (2017)
Stabbing resistance of body armour panels impregnated with shear thickening fluid
Yue Xu et al.
COMPOSITE STRUCTURES (2017)
Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review
Shady Farah et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Tension-Compression Fatigue Behavior of Plain Woven Kenaf/Kevlar Hybrid Composites
Suhad D. Salman et al.
BioResources (2016)
Mechanical properties of polylactic acid (PLA) composites reinforced with unidirectional flax and flax-paper layers
Adrien Couture et al.
COMPOSITE STRUCTURES (2016)
Review of the recent developments in cellulose nanocomposite processing
Kristiina Oksman et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Natural fiber-mediated epoxy composites - A review
V. Mittal et al.
COMPOSITES PART B-ENGINEERING (2016)
Effect of external basalt layers on durability behaviour of flax reinforced composites
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2016)
Tensile, Flexual, Impact and Water Absorption Properties of Natural Fibre Reinforced Polyester Hybrid Composites
R. Prasanna Venkatesh et al.
FIBRES & TEXTILES IN EASTERN EUROPE (2016)
Effect of thickness on the impact resistance of flax fibre-reinforced polymer
Wenjie Wang et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)
Manipulating the Assembly of Spray-Deposited Nanocolloids: In Situ Study and Monolayer Film Preparation
Peng Zhang et al.
LANGMUIR (2016)
Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications
Majid Niaz Akhtar et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Influence of alkaline treatment and fiber loading on the physical and mechanical properties of kenaf/polypropylene composites for variety of applications
Majid Niaz Akhtar et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
The effects of through-the-thickness stitching on theMode I interlaminar fracture toughness of flax/epoxy composite laminates
M. Ravandi et al.
MATERIALS & DESIGN (2016)
Novel Al-based metallic glass coatings by Cold Gas Spray
John Henao et al.
MATERIALS & DESIGN (2016)
Mechanical Properties of Pineapple Leaf Fibre Reinforced Polymer Composites for Application as Prosthetic Socket
Jamiu Odusote et al.
JOURNAL OF ENGINEERING TECHNOLOGY (2016)
Effect of Natural Fibers and Bio-Resins on Mechanical Properties in Hybrid and Non-Hybrid Composites
Cristiano Fragassa
VIII INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY (2016)
Surface modification of natural fibers: a review
Juliana Cruz et al.
TENSINET - COST TU1303 INTERNATIONAL SYMPOSIUM 2016 - NOVEL STRUCTURAL SKINS - IMPROVING SUSTAINABILITY AND EFFICIENCY THROUGH NEW STRUCTURAL TEXTILE MATERIALS AND DESIGNS (2016)
Effect of temperature and hybridisation on the low velocity impact behavior of hemp-basalt/epoxy composites
C. Suresh Kumar et al.
COMPOSITE STRUCTURES (2015)
Thickness-dependent energy dissipation characteristics of laminated composites subjected to low velocity impact
Celal Evci
COMPOSITE STRUCTURES (2015)
Fire structural resistance of basalt fibre composite
T. Bhat et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites
V. Fiore et al.
COMPOSITES PART B-ENGINEERING (2015)
Shear and mode II fracture of PUR foams
Liviu Marsavina et al.
ENGINEERING FAILURE ANALYSIS (2015)
A note on the effect of the fiber curvature on the micromechanical behavior of natural fiber reinforced thermoplastic composites
M. A. Escalante-Solis et al.
EXPRESS POLYMER LETTERS (2015)
Residual sisal fibers treated by methane cold plasma discharge for potential application in cement based material
B. N. Barra et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
Green composites prepared from aliphatic polyesters and bast fibers
Zoi N. Terzopoulou et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
Nanocelluloses from jute fibers and their nanocomposites with natural rubber: Preparation and characterization
Martin George Thomas et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)
On the formation of metallic glass coatings by means of Cold Gas Spray technology
A. Concustell et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Mode I fracture toughness of carbon-glass/epoxy interply hybrid composites
Hana Jung et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric
Fernanda Santos da Luz et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
Water Absorption Behaviour and Its Effect on the Mechanical Properties of Flax Fibre Reinforced Bioepoxy Composites
E. Munoz et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)
A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties
Furqan Ahmad et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Influence of matrix toughness and ductility on the compression-after-impact behavior of woven-ply thermoplastic- and thermosetting-composites: A comparative study
B. Vieille et al.
COMPOSITE STRUCTURES (2014)
Fibre hybridisation in polymer composites: A review
Yentl Swolfs et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Effect of preload on the impact response of curved composite panels
H. Saghafi et al.
COMPOSITES PART B-ENGINEERING (2014)
Environmental effects on the mechanical behaviour of pultruded jute/glass fibre-reinforced polyester hybrid composites
Hazizan Md Akil et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Falling weight impact response of jute/methacrylated soybean oil bio-composites under low velocity impact loading
H. N. Dhakal et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications
Reza Mahjoub et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Review: Raw Natural Fiber-Based Polymer Composites
Vijay Kumar Thakur et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2014)
Influence of temperature and impact velocity on the impact response of jute/UP composites
H. N. Dhakal et al.
POLYMER TESTING (2014)
Development of flax/carbon fibre hybrid composites for enhanced properties
H. N. Dhakal et al.
CARBOHYDRATE POLYMERS (2013)
Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites
M. Boopalan et al.
COMPOSITES PART B-ENGINEERING (2013)
Mechanical property evaluation of sisal-jute-glass fiber reinforced polyester composites
M. Ramesh et al.
COMPOSITES PART B-ENGINEERING (2013)
Hybridization effect on the mechanical properties of curaua/glass fiber composites
Jose Humberto Santos Almeida Junior et al.
COMPOSITES PART B-ENGINEERING (2013)
A comparative study of the mechanical properties of hemp fiber with virgin and recycled high density polyethylene matrix
Na Lu et al.
COMPOSITES PART B-ENGINEERING (2013)
Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
Yongli Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Mechanical characterization and impact damage assessment of a woven carbon fiber reinforced carbon nanotube-epoxy composite
M. Tehrani et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Effect of reinforcement on the mechanical and thermal properties of flax/polypropylene interwoven fabric composites
T. Gobi Kannan et al.
JOURNAL OF INDUSTRIAL TEXTILES (2013)
Cold Spray Coating Deposition Mechanism on the Thermoplastic and Thermosetting Polymer Substrates
Amirthan Ganesan et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Mechanical characterisation of hybrid composite laminates based on basalt fibres in combination with flax, hemp and glass fibres manufactured by vacuum infusion
R. Petrucci et al.
MATERIALS & DESIGN (2013)
Computational analysis of shear thickening fluid impregnated fabrics subjected to ballistic impacts
Bok-Won Lee et al.
ADVANCED COMPOSITE MATERIALS (2012)
Low-velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites: Influence of impactor geometry and impact velocity
H. N. Dhakal et al.
COMPOSITE STRUCTURES (2012)
Diameter dependence of the apparent tensile modulus of hemp fibres: A morphological, structural or ultrastructural effect?
Vincent Placet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
M. M. Kabir et al.
COMPOSITES PART B-ENGINEERING (2012)
Hemp fiber and its composites - a review
Asim Shahzad
JOURNAL OF COMPOSITE MATERIALS (2012)
Flexural and impact properties of flax woven, knitted and sequentially stacked knitted/woven preform reinforced epoxy composites
B. A. Muralidhar et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
A review on mechanical behavior of natural fiber based hybrid composites
Srinivas Nunna et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats
Dina Goldbaum et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2012)
Study of hybrid intralaminate curaua/glass composites
Jose Humberto Santos Almeida Junior et al.
MATERIALS & DESIGN (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
M. Jawaid et al.
CARBOHYDRATE POLYMERS (2011)
A review on the tensile properties of natural fiber reinforced polymer composites
H. Ku et al.
COMPOSITES PART B-ENGINEERING (2011)
Study of water behaviour of chemically treated flax fibres-based composites: A way to approach the hydric interface
S. Alix et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Simulation of Large Fragment Impacts on Shear-Thickening Fluid Kevlar Fabric Barriers
Robert J. Rabb et al.
JOURNAL OF AIRCRAFT (2011)
A fibre diameter distribution factor (FDDF) for natural fibre composites
John Summerscales et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Modeling and evaluation of tensile properties of randomly oriented banana/epoxy composite
N. Venkateshwaran et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Impact and fatigue properties of hemp-glass fiber hybrid biocomposites
Asim Shahzad
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
The fracture properties of environmental-friendly fiber metal laminates
H. T. N. Kuan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Diameter dependence of tensile strength by Weibull analysis: Part II jute fiber
A. B. Bevitori et al.
Materia-Rio de Janeiro (2011)
A review: Fibre metal laminates, background, bonding types and applied test methods
Tamer Sinmazcelik et al.
MATERIALS & DESIGN (2011)
Hybridization effect on the mechanical and dynamic mechanical properties of curaua composites
Heitor Luiz Ornaghi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A study of the effect of strain rate and temperature on the characteristics of quasi-unidirectional natural fibre-reinforced composites
O. S. David-West et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2011)
Preparation of metallic coatings on polymer matrix composites by cold spray
X. L. Zhou et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Importance of fiber preparation to optimize the surface and mechanical properties of unitary flax fiber
Alain Bourmaud et al.
INDUSTRIAL CROPS AND PRODUCTS (2010)
The Mechanical Properties of Treated and Untreated Kenaf Fibre Reinforced Epoxy Composite
M. A. Abu Bakar et al.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2010)
Influence of Hygrothermal Ageing on the Physico-Mechanical Properties of Alkali Treated Industrial Hemp Fibre Reinforced Polylactic Acid Composites
M. S. Islam et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2010)
Effect of Moisture Absorption on Mechanical Properties of Chopped Natural Fiber Reinforced Epoxy Composite
Chittaranjan Deo et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2010)
An Improved Method for Single Fiber Tensile Test of Natural Fibers
Wei Hu et al.
POLYMER ENGINEERING AND SCIENCE (2010)
Extensional rheology of a shear-thickening cornstarch and water suspension
Erica E. Bischoff White et al.
RHEOLOGICA ACTA (2010)
Deposition of metallic coatings on polymer surfaces using cold spray
R. Lupoi et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Recent trends in cold spray technology: looking at the future
Julio Villafuerte
SURFACE ENGINEERING (2010)
A procedure for identifying textile bast fibres using microscopy: Flax, nettle/ramie, hemp and jute
Christian Bergfjord et al.
ULTRAMICROSCOPY (2010)
Shear thickening in polymer stabilized colloidal suspensions
Joachim Kaldasch et al.
COLLOID AND POLYMER SCIENCE (2009)
Multiple Data Set (MDS) weak-link scaling analysis of jute fibres
Amandeep Singh Virk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Effect of surface treatment on performance of pineapple leaf fiber-polycarbonate composites
P. Threepopnatkul et al.
COMPOSITES PART B-ENGINEERING (2009)
Surface modification of okra bast fiber and its physico-chemical characteristics
G. M. Arifuzzaman Khan et al.
FIBERS AND POLYMERS (2009)
Effect of Fibre Architecture on the Failing Weight Impact Properties of Hemp/Epoxy Composites
C. Santulli et al.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2009)
Recent Development in Natural Fiber Reinforced Polypropylene Composites
Ramakrishna Malkapuram et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2009)
Physical Modification of Natural Fibers and Thermoplastic Films for Composites - A Review
S. Mukhopadhyay et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2009)
Competitive binding of pectin and xyloglucan with primary cell wall cellulose
Agata Zykwinska et al.
CARBOHYDRATE POLYMERS (2008)
Effect of chemical modification on properties of hybrid fiber biocomposites
Maya Jacob John et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
The effect of temperature and strain rate on the impact performance of recyclable all-polypropylene composites
B. Alcock et al.
COMPOSITES PART B-ENGINEERING (2008)
Low velocity impact properties of 3D woven basalt/aramid hybrid composites
X. Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Benjamin Bax et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Fatigue crack initiation in hybrid boron/glass/aluminum fiber metal laminates
Po-Yu Chang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Recent developments in chemical modification and characterization of natural fiber-reinforced composites
Maya Jacob John et al.
POLYMER COMPOSITES (2008)
Thermal decomposition kinetics of natural fibers: Activation energy with dynamic thermogravimetric analysis
Fei Yao et al.
POLYMER DEGRADATION AND STABILITY (2008)
The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites
H. N. Dhakal et al.
COMPOSITE STRUCTURES (2007)
Characterization of the morphological, physical, and mechanical properties of seven nonwood plant fiber bundles
Sasa Sofyan Munawar et al.
JOURNAL OF WOOD SCIENCE (2007)
Deformation and fracture behaviour of flax fibre reinforced thermosetting polymer matrix composites
Mark Hughes et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Study of structural morphology of hemp fiber from the micro to the nanoscale
Bei Wang et al.
APPLIED COMPOSITE MATERIALS (2007)
Characteristics of Hermes flax fibres as a function of their location in the stem and properties of the derived unidirectional composites
K. Charlet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
The response of natural fibre composites to ballistic impact by fragment simulating projectiles
Paul Wambua et al.
COMPOSITE STRUCTURES (2007)
Dislocations in single hemp fibres-investigations into the relationship of structural distortions and tensile properties at the cell wall level
Lisbeth G. Thygesen et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review
Xue Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2007)
Improvement of low-velocity impact and compression-after-impact performance by z-fibre pinning
X. Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Mode II fracture testing of composites: a new look at an old problem
B. R. K. Blackman et al.
ENGINEERING FRACTURE MECHANICS (2006)
Natural-fiber-reinforced polymer composites applications in automotive
James Holbery et al.
JOM (2006)
Mechanical properties of alkali treated plant fibres and their potential as reinforcement materials. I. hemp fibres
LY Mwaikambo et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Effect of sowing date and plant density on the cell morphology of hemp (Cannabis sativa L.)
TA Schafer et al.
INDUSTRIAL CROPS AND PRODUCTS (2006)
Effect of extrusion rate and fiber loading on mechanical properties of twaron fiber-thermoplastic natural rubber (TPNR) composites
Ishak Ahmad et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2006)
Effect of stitching on Mode I strain energy release rate
GC Tsai et al.
COMPOSITE STRUCTURES (2005)
The rheology and microstructure of acicular precipitated calcium carbonate colloidal suspensions through the shear thickening transition
RG Egres et al.
JOURNAL OF RHEOLOGY (2005)
Strength distribution of elementary flax fibres
J Andersons et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Drop weight impact test fracture of vinyl ester composites: Micrographs of pilot study
H Ku et al.
JOURNAL OF COMPOSITE MATERIALS (2005)
Unidirectional hemp and flax EP- and PP-composites: Influence of defined fiber treatments
AK Bledzki et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2004)
Intraply and interply hybrid composites based on E-glass and poly(vinyl alcohol) woven fabrics: tensile and impact properties
A Pegoretti et al.
POLYMER INTERNATIONAL (2004)
Effect of stitch distribution on mode I delamination toughness of laminated DCB specimens
XN Sun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites
G Cantero et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Natural fibres: can they replace glass in fibre reinforced plastics?
P Wambua et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Influence of processing and chemical treatment of flax fibres on their composites
I Van de Weyenberg et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Effect of fibre surface modification on water-sorption characteristics of oil palm fibres
MS Sreekala et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Characterization of alkali treated flax fibres by means of FT Raman spectroscopy and environmental scanning electron microscopy
A Jähn et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2002)
Radiative properties of fibers with non-circular cross sectional shapes
J Yamada
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2002)
Effect of stitching on in-plane and interlaminar properties of sisal/epoxy laminates
MZ Rong et al.
JOURNAL OF COMPOSITE MATERIALS (2002)
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
C Baley
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Thermoplastic polymers: overview of several properties and their consequences in flax fibre reinforced composites
K Van de Velde et al.
POLYMER TESTING (2001)
Hydrophobization of wood surfaces:: covalent grafting of silicone polymers
G Sèbe et al.
WOOD SCIENCE AND TECHNOLOGY (2001)
Experimental evaluation of geometric factors affecting damage mechanisms in carbon/epoxy plates
G Zhou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Impact response and damage tolerance characteristics of glass-carbon/epoxy hybrid composite plates
NK Naik et al.
COMPOSITES PART B-ENGINEERING (2001)
Oil palm fibre reinforced phenol formaldehyde composites: Influence of fibre surface modifications on the mechanical performance
MS Sreekala et al.
APPLIED COMPOSITE MATERIALS (2000)
Mechanical properties of natural-fibre-mat-reinforced thermoplastics based on flax fibres and polypropylene
SK Garkhail et al.
APPLIED COMPOSITE MATERIALS (2000)
Composition and distribution of cell wall phenolic compounds in flax (Linum usitatissimum L.) stem tissues
TA Gorshkova et al.
ANNALS OF BOTANY (2000)
分享论文
