相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Thermal/vibration joint experimental investigation on lightweight ceramic insulating material for hypersonic vehicles in extremely high-temperature environment up to 1500 °C
Dafang Wu et al.
CERAMICS INTERNATIONAL (2020)
Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
Ievgenii Liashenko et al.
NATURE COMMUNICATIONS (2020)
Recent progress in the fabrication techniques of 3D scaffolds for tissue engineering
Mostafa Mabrouk et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Microtip focused electrohydrodynamic jet printing with nanoscale resolution
Shijie Su et al.
NANOSCALE (2020)
Effect of heat treatment atmosphere on the piezoresistivity of indium tin oxide ceramic strain sensor
Shenyong Yang et al.
CERAMICS INTERNATIONAL (2019)
Investigation of high temperature electrical insulation property of MgO ceramic films and the influence of annealing process
Hao Liu et al.
CERAMICS INTERNATIONAL (2019)
Electrohydrodynamic 3D printing of layer-specifically oriented, multiscale conductive scaffolds for cardiac tissue engineering
Qi Lei et al.
NANOSCALE (2019)
Thermal failure mechanism of multilayer brittle TiN/CrAlN films
Xiao Chen et al.
CERAMICS INTERNATIONAL (2018)
High-Temperature Electrical Insulation Behavior of Alumina Films Prepared at Room Temperature by Aerosol Deposition and Influence of Annealing Process and Powder Impurities
Michael Schubert et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics
Zheng Cui et al.
NANOSCALE (2018)
YSZ/Al2O3 multilayered film as insulating layer for high temperature thin film strain gauge prepared on Ni-based superalloy
Hao Liu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2018)
High resolution patterning of Ag nanowire flexible transparent electrode via electrohydrodynamic jet printing of acrylic polymer-silicate nanoparticle composite overcoating layer
Xinlin Li et al.
ORGANIC ELECTRONICS (2018)
Electrohydrodynamic Spinning of Random-Textured Silver Webs for Electrodes Embedded in Flexible Organic Solar Cells
Dai Geon Yoon et al.
JOURNAL OF THE KOREAN PHYSICAL SOCIETY (2017)
3D printed multiplexed electrospinning sources for large-scale production of aligned nanofiber mats with small diameter spread
Erika Garcia-Lopez et al.
NANOTECHNOLOGY (2017)
ITO film prepared by ion beam sputtering and its application in high-temperature thermocouple
Yao Zhang et al.
VACUUM (2017)
AC, DC conduction and dielectric behaviour of solid and liquid phase sintered Al2O3-15 mol% V2O5 pellets
S. Seethalakshmi et al.
CERAMICS INTERNATIONAL (2017)
Mo-doped Pr0.6Sr0.4Fe0.8Ni0.2O3-δ as potential electrodes for intermediate-temperature symmetrical solid oxide fuel cells
Xiaoyong Lu et al.
ELECTROCHIMICA ACTA (2017)
A new sol-gel route to prepare dense Al2O3 thin films
Baofu Hu et al.
CERAMICS INTERNATIONAL (2016)
Solid-state synthesis of high performance Na-β-Al2O3 solid electrolyte doped with MgO
Guangyu Chen et al.
CERAMICS INTERNATIONAL (2016)
Electrical insulation of ceramic thin film on metallic aero-engine blade for high temperature sensor applications
Junchao Gao et al.
CERAMICS INTERNATIONAL (2016)
Electrohydrodynamic atomization deposition and mechanical polishing of PZT thick films
D. Wang et al.
CERAMICS INTERNATIONAL (2016)
Forward electrohydrodynamic inkjet printing of optical microlenses on microfluidic devices
V. Vespini et al.
LAB ON A CHIP (2016)
Additively manufactured MEMS multiplexed coaxial electrospray sources for high-throughput, uniform generation of core-shell microparticles
D. Olvera-Trejo et al.
LAB ON A CHIP (2016)
High temperature sensors fabricated on Al2O3 ceramic and nickel-based superalloy substrates
Yanlei Wang et al.
SENSORS AND ACTUATORS A-PHYSICAL (2016)
Preparation, characterization and application of high-temperature Al2O3 insulating film
Di Niu et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Fabrication of Crack-Free Barium Titanate Thin Film with High Dielectric Constant Using Sub-Micrometric Scale Layer-by-Layer E-Jet Deposition
Junsheng Liang et al.
MATERIALS (2016)
Electrohydrodynamic jet printing of PZT thick film micro-scale structures
D. Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Direct Micro Metal Patterning on Plastic Substrates by Electrohydrodynamic Jet Printing for Flexible Electronic Applications
Jinhyeong Kwon et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2015)
Gas Turbine Engine Health Management: Past, Present, and Future Trends
Allan J. Volponi
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2014)
Non-contact printing of high aspect ratio Ag electrodes for polycrystalline silicone solar cell with electrohydrodynamic jet printing
Yonghee Jang et al.
APPLIED PHYSICS LETTERS (2013)
Electrohydrodynamic atomization deposition of PZT sol-gel slurry and sol infiltration on the films
D. Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Instrument for layer-by-layer deposition of catalyst layers directly on proton exchange membrane for direct methanol fuel cell
D. Wang et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2012)
Fabrication of TiO2 thin film memristor device using electrohydrodynamic inkjet printing
Navaneethan Duraisamy et al.
THIN SOLID FILMS (2012)
Electrohydrodynamic preparation of particles, capsules and bubbles for biomedical engineering applications
Marjan Enayati et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Preparation and characterization of ceramic thin film thermocouples
Otto J. Gregory et al.
THIN SOLID FILMS (2010)
Formation of PZT crack-free thick films by electrohydrodynamic atomization deposition
D. Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Solid freeform fabrication of thin-walled ceramic structures using an electrohydrodynamic jet
DZ Wang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Instrument for electrohydrodynamic print-patterning three-dimensional complex structures
DZ Wang et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2005)
High resolution print-patterning of a nano-suspension
DZ Wang et al.
JOURNAL OF NANOPARTICLE RESEARCH (2005)
A novel process for simulataneous printing of multiple tracks from concentrated suspensions
SN Jayasinghe et al.
MATERIALS RESEARCH INNOVATIONS (2003)
A novel ceramic printing technique based on electrostatic atomization of a suspension
SN Jayasinghe et al.
MATERIALS RESEARCH INNOVATIONS (2002)
分享论文
