相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Cavitation erosion characteristics at various flow velocities in NaCl medium of carbide-based cermet coatings prepared by HVOF spraying
Sheng Hong et al.
CERAMICS INTERNATIONAL (2021)
Microstructure and cavitation erosion behavior of HVOF sprayed ceramic-metal composite coatings for application in hydro-turbines
Sheng Hong et al.
RENEWABLE ENERGY (2021)
The optimization of microbial influenced corrosion resistance of HVOF sprayed nanostructured WC-10Co-4Cr coatings by ultrasound-assisted sealing
Sheng Hong et al.
ULTRASONICS SONOCHEMISTRY (2021)
Effect of carbon content on microstructure and mechanical properties of WC-10Co cemented carbides with plate-like WC grain
Qiumin Yang et al.
CERAMICS INTERNATIONAL (2020)
An innovative model coupling TGO growth and crack propagation for the failure assessment of lamellar structured thermal barrier coatings
Zhi-Yuan Wei et al.
CERAMICS INTERNATIONAL (2020)
Promotion of the fragmentation and densification for a dense vacuum kinetic-sprayed Y2O3 coating by heat-treatment of feedstock powder
Hansol Kwon et al.
CERAMICS INTERNATIONAL (2020)
Experimental and Numerical Investigation of Residual Stress in Coatings on Steel
Sarvesh Ojha et al.
JOURNAL OF TESTING AND EVALUATION (2020)
Precipitation kinetics, microstructure, and equilibrium state of A2 and B2 phases in multicomponent Al2.75CoCrFeNi alloy
M. Aizenshtein et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Preparation and properties of multilayer graphene reinforced binderless TiC nanocomposite cemented carbide through two-step sintering
Jialin Sun et al.
MATERIALS & DESIGN (2020)
Residual Stress Distribution Through the Thickness of WC-10Co-4Cr Coating Deposited by HVOF: Experimental and Simulation Study
Maedeh Sadat Zoei et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)
Interface characterization and mechanical properties of Mo-added chromium carbide-nickel composite
Liang Sun et al.
CERAMICS INTERNATIONAL (2020)
Effect of SiC nanoparticle content and milling time on the microstructural characteristics and properties of Mg-SiC nanocomposites synthesized with powder metallurgy incorporating high-energy ball milling
Kowit Ponhan et al.
CERAMICS INTERNATIONAL (2020)
The interaction mechanism of cavitation erosion and corrosion on HVOF sprayed NiCrWMoCuCBFe coating in artificial seawater
Yijing Wang et al.
APPLIED SURFACE SCIENCE (2020)
A theoretical study of the stability, mechanical and thermal properties of AlNiCuCo equimolar high entropy alloy
Zhihao Huang et al.
PHYSICS LETTERS A (2020)
Complex concentrated alloy bimodal composite claddings with enhanced cavitation erosion resistance
H. S. Grewal et al.
SURFACE & COATINGS TECHNOLOGY (2020)
The resistance of S235JR steel to cavitation erosion
Alicja K. Krella et al.
WEAR (2020)
Effect of Coating Thickness on Fatigue Behavior of AISI 1045 Steel with HVOF Thermal Spray and Hard Chrome Electroplating
Vinh Phoi Nguyen et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2020)
Ultrasonic Cavitation Erosion Behavior of AlCoCrxCuFe High Entropy Alloy Coatings Synthesized by Laser Cladding
Danqing Yin et al.
MATERIALS (2020)
Effect of flow velocity on cavitation erosion behavior of HVOF sprayed WC-10Ni and WC-20Cr3C2-7Ni coatings
Sheng Hong et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Study of characteristics and properties of spark plasma sintered WC with the use of alternative Fe-Ni-Nb binder as Co replacement
Joice Medeiros Borges Rosa et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2020)
Preparation and performance of ultrafine grained WC-10Co alloys with added La2O3
Jianfeng Li et al.
CERAMICS INTERNATIONAL (2019)
An investigation on high entropy alloy for bond coat application in thermal barrier coating system
Mahesh Jadhav et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Elemental segregation in an AlCoCrFeNi high-entropy alloy - A comparison between selective laser melting and induction melting
Dennis Karlsson et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microwave synthesized complex concentrated alloy coatings: Plausible solution to cavitation induced erosion-corrosion
Rakesh B. Nair et al.
ULTRASONICS SONOCHEMISTRY (2019)
Effect of solution treatment on cavitation erosion behavior of high-nitrogen austenitic stainless steel
Yanxin Qiao et al.
WEAR (2019)
Cavitation erosion behavior of friction stir processed nickel aluminum bronze
Yang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Comparison of the cavitation erosion and slurry erosion behavior of cobalt-based and nickel-based coatings
M. E et al.
WEAR (2019)
Effect of Fe impurities and pure Cr additions on microstructure of nanostructured WC-10Co alloy sintered by HIP
C. G. Garay-Reyes et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Study of the corrosion and cavitation resistance of HVOF and HVAF FeCrMnSiNi and FeCrMnSiB coatings
L. L. Silveira et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructures and mechanical properties of FeCoCrNi high entropy alloy/WC reinforcing particles composite coatings prepared by laser cladding and plasma cladding
Y. B. Peng et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Influence of epoxy resin on the microstructure and cavitation erosion of as-sprayed 8YSZ coating
Wen Den et al.
CERAMICS INTERNATIONAL (2019)
Effect of Particle and Carbide Grain Sizes on a HVOAF WC-Co-Cr Coating for the Future Application on Internal Surfaces: Microstructure and Wear
J. Pulsford et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance
Yunzhu Shi et al.
CORROSION SCIENCE (2018)
A novel High-Entropy Alloy-based composite material
Sephira Riva et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Influence of La2O3 addition on nano indentation hardness and residual stress of Stellite 6 coating prepared by plasma cladding
Yongchao Fang et al.
JOURNAL OF RARE EARTHS (2018)
A new methodology to prepare ceramic-organic composite coatings with good cavitation erosion resistance
Wen Deng et al.
ULTRASONICS SONOCHEMISTRY (2018)
Study of Traverse Speed Effects on Residual Stress State and Cavitation Erosion Behavior of Arc-Sprayed Aluminum Bronze Coatings
Michel Hauer et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
APS prepared NiCrBSi-YSZ composite coatings for protection against cavitation erosion
Yan Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
TCHEA1: A Thermodynamic Database Not Limited for High Entropy'' Alloys
Huahai Mao et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2017)
Thermal insulation properties of YSZ coatings: Suspension Plasma Spraying (SPS) versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS)
Benjamin Bernard et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Relationships between spray parameters, microstructures and ultrasonic cavitation erosion behavior of HVOF sprayed Fe-based amorphous/nanocrystalline coatings
Lei Qiao et al.
ULTRASONICS SONOCHEMISTRY (2017)
The effect of temperature on the dry sliding wear behavior of HVOF sprayed nanostructured WC-CoCr coatings
Sheng Hong et al.
CERAMICS INTERNATIONAL (2017)
Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic
X. Guo et al.
COMPOSITE STRUCTURES (2016)
A numerical study of bioinspired nacre-like composite plates under blast loading
E. A. Flores-Johnson et al.
COMPOSITE STRUCTURES (2015)
Ultrasonic cavitation erosion of high-velocity oxygen-fuel (HVOF) sprayed near-nanostructured WC-10Co-4Cr coating in NaCl solution
Sheng Hong et al.
ULTRASONICS SONOCHEMISTRY (2015)
CSUDDCC1-A diffusion database for multicomponent cemented carbides
Weibin Zhang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2014)
Tribological behavior of HVOF- and HVAF-sprayed composite coatings based on Fe-Alloy + WC-12% Co
Giovanni Bolelli et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Evolution of Lamellar Interface Cracks During Isothermal Cyclic Test of Plasma-Sprayed 8YSZ Coating with a Columnar-Structured YSZ Interlayer
Chang-Jiu Li et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Shielding performances of the designed hybrid laminates impacted by hypervelocity flyer
Hong Wan et al.
MATERIALS & DESIGN (2013)
Devitrification of arc-sprayed FeBSiNb amorphous coatings: Effects on wear resistance and mechanical behavior
J. B. Cheng et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Compressive strength, hardness and fracture toughness of Al2O3 whiskers reinforced ZTA and ATZ nanocomposites: Weibull analysis
A. Nevarez-Rascon et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2011)
Two-step method to evaluate equibiaxial residual stress of metal surface based on micro-indentation tests
Masaaki Nishikawa et al.
MATERIALS & DESIGN (2011)
Cavitation erosion-corrosion behaviour of CrMnB stainless overlay and 0Cr13Ni5Mo stainless steel in 0.5 M NaCl and 0.5 M HCL solutions
Y. G. Zheng et al.
TRIBOLOGY INTERNATIONAL (2008)
Experimental and numerical investigations on development of cavitation erosion pits on solid surface
Chen Haosheng et al.
TRIBOLOGY LETTERS (2007)
High-order theory for the analysis of multi-layer plate assemblies and its application for the analysis of sandwich panels with terminating plies
OT Thomsen
COMPOSITE STRUCTURES (2000)
分享论文
