相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Integrating N and F co-doped TiO2 nanotubes with ZIF-8 as photoelectrode for enhanced photo-electrocatalytic degradation of sulfamethazine
Meiying Jia et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Bioactive TiNbSn alloy prepared by anodization in sulfuric acid electrolytes
N. Masahashi et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Anodic TiO2 nanotube supercapacitors enhanced by a facile in situ doping method
Cheng Zhang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Charge carrier trapping, recombination and transfer during TiO2 photocatalysis: An overview
Ruifeng Qian et al.
CATALYSIS TODAY (2019)
Anion additives in rapid breakdown anodization for nonmetal-doped TiO2 nanotube powders
Euiseok Song et al.
ELECTROCHEMISTRY COMMUNICATIONS (2019)
Influence of the Ti alloy substrate on the anodic oxidation in an environmentally-friendly electrolyte
Guolong Wu et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Photocatalytic activity and the radiative lifetimes of excitons via an ab initio approach
Linping Hu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Oxygen Vacancy-Mediated Photocatalysis of BiOCl: Reactivity, Selectivity, and Perspectives
Hao Li et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Study of bioactivity on a TiNbSn alloy surface
N. Masahashi et al.
THIN SOLID FILMS (2017)
Synthesis of calcium-phosphorous doped TiO2 nanotubes by anodization and reverse polarization: A promising strategy for an efficient biofunctional implant surface
Sofia A. Alves et al.
APPLIED SURFACE SCIENCE (2017)
Anodic Film Growth of Titanium Oxide Using the 3-Electrode Electrochemical Technique: Effects of Oxygen Evolution and Morphological Characterizations
Z. J. Liu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Multifunctional coatings to simultaneously promote osseointegration and prevent infection of orthopaedic implants
Jordan Raphel et al.
BIOMATERIALS (2016)
Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti-10V-2Fe-3Al
Ma Kun et al.
CHINESE JOURNAL OF AERONAUTICS (2016)
Photo-induced properties of anodic oxide on Ti-Pd alloy prepared in acetic acid electrolyte
N. Masahashi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of Ti+4 on in vitro bioactivity and antibacterial activity of silicate glass-ceramics
Madeeha Riaz et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Synchronised electrical monitoring and high speed video of bubble growth associated with individual discharges during plasma electrolytic oxidation
S. C. Troughton et al.
APPLIED SURFACE SCIENCE (2015)
Photocatalytic characteristics of boron and nitrogen doped titania film synthesized by micro-arc oxidation
Jong-Ho Lee et al.
CERAMICS INTERNATIONAL (2015)
Fabrication of Antibacterial Photocatalytic Titanium Foil by Anodic Oxidation
Yuta Miura et al.
CHEMISTRY LETTERS (2015)
Visible light activity of sulfur-doped TiO2 nanostructure photoelectrodes prepared by single-step electrochemical anodizing process
Mohamad Mohsen Momeni et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2015)
Metallic implant biomaterials
Qizhi Chen et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2015)
Potential release of in vivo trace metals from metallic medical implants in the human body: From ions to nanoparticles - A systematic analytical review
Henryk Matusiewicz
ACTA BIOMATERIALIA (2014)
New understanding of the difference of photocatalytic activity among anatase, rutile and brookite TiO2
Jinfeng Zhang et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Characterization of anodic oxide growth on commercially pure titanium in NaTESi electrolyte
Z. Liu et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Effect of sodium on photovoltaic properties of dye-sensitized solar cells assembled with anatase TiO2 nanosheets with exposed {001} facets
Xia Wu et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)
Mechanical properties and microstructures of β Ti-25Nb-11Sn ternary alloy for biomedical applications
Taek-Kyun Jung et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Effect of stress-induced α martensite on Young's modulus of β Ti-33.6Nb-4Sn alloy
Shuji Hanada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
A new concept of hip joint stem and its fabrication using metastable TiNbSn alloy
Taek-Kyun Jung et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Photo-induced properties of anodic oxide films on Ti6Al4V
Naoya Masahashi et al.
THIN SOLID FILMS (2012)
Titanium oxide antibacterial surfaces in biomedical devices
Livia Visai et al.
INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2011)
Morphology and growth of porous anodic oxide films on Ti-10V-2Fe-3Al in neutral tartrate solution
Yi Jun-lan et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2011)
Review of the anatase to rutile phase transformation
Dorian A. H. Hanaor et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Effect of glass substrate and deposition technique on the properties of sol gel TiO2 thin films
Josef Krysa et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2011)
Photocatalytic Activity of Bulk TiO2 Anatase and Rutile Single Crystals Using Infrared Absorption Spectroscopy
Mingchun Xu et al.
PHYSICAL REVIEW LETTERS (2011)
Titanium dioxide in our everyday life; is it safe?
Matej Skocaj et al.
RADIOLOGY AND ONCOLOGY (2011)
Photo-induced characteristics of a Ti-Nb-Sn biometallic alloy with low Young's modulus
N. Masahashi et al.
THIN SOLID FILMS (2010)
Visible light responses of sulfur-doped rutile titanium dioxide photocatalysts fabricated by anodic oxidation
Yoshiteru Mizukoshi et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2009)
Enhanced photocatalytic activity of rutile TiO2 prepared by anodic oxidation in a high concentration sulfuric acid electrolyte
N. Masahashi et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2009)
Efficacy of titanium dioxide photocatalyst for inhibition of bacterial colonization on percutaneous implants
Yoshinobu Oka et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2008)
Preparation of high efficient photoelectrode of N-F-codoped TiO2 nanotubes
Yaling Su et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2008)
Electron transport and recombination in dye-sensitized mesoporous TiO2 probed by photoinduced charge-conductivity modulation spectroscopy with Monte Carlo modeling
Annamaria Petrozza et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Phase stability and microstructure development in hydroxyapatite-mullite system
Shekhar Nath et al.
SCRIPTA MATERIALIA (2008)
Microstructure and superhydrophilicity of anodic TiO2 films on pure titanium
N. Masahashi et al.
THIN SOLID FILMS (2008)
Effects of anodizing conditions on bond strength of anodically oxidized film to titanium substrate
Yeong-Joon Park et al.
APPLIED SURFACE SCIENCE (2007)
Effect of anodic oxidation parameters on the titanium oxides formation
M. V. Diamanti et al.
CORROSION SCIENCE (2007)
An electrochemical strategy to incorporate nitrogen in nanostructured TiO2 thin films:: modification of bandgap and photoelectrochemical properties
Karthik Shankar et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2006)
Beta TiNbSn alloys with low young's modulus and high strength
H Matsumoto et al.
MATERIALS TRANSACTIONS (2005)
Light-induced charge separation in anatase TiO2 particles
T Berger et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2005)
Effect of alkaline-doped TiO2 on photocatalytic efficiency
Y Bessekhouad et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2004)
Beta Ti alloys with low Young's modulus
T Ozaki et al.
MATERIALS TRANSACTIONS (2004)
Crystallization of anodic titania on titanium and its alloys
H Habazaki et al.
CORROSION SCIENCE (2003)
分享论文
