Improved electrochemical performance of LiMn2O4 surface-modified by a Mn4+-rich phase for rechargeable lithium-ion batteries

The surface of spinel LiMn2O4 is modified with different quantities of a Mn4+-rich phase prepared by a facile sol-gel method to improve electrochemical properties at elevated temperatures. Impurity-free and uniform morphologies for the LiMn2O4 particles are demonstrated from the X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The Mn4+-rich phase modified on the surface of the LiMn2O4 alleviates the dissolution of manganese in the electrolyte, thus improving the cycling performance and rate capability relative to the bare LiMn2O4. 1 wt.%-modified LiMn2O4 delivers a capacity retention of 92.7% and a discharge capacity of 113.5 mAh g(-1) after 200 cycles at 1C and 25 degrees C, compared with that of 83.1%, and 100.8 mAh g(-1) for the bare LiMn2O4. In addition, after 100 cycles, a capacity retention of 88.6% at 1C is achieved for 1 wt.%-modified LiMn2O4 at 55 degrees C, which is higher than the 76.0% for the bare LiMn2O4. Furthermore, this sample shows the best rate capability among all samples. The Mn4+-rich phase is an appropriate candidate for modifying surfaces to suppress dissolution of manganese, thereby improving the electrochemical properties of LiMn2O4. (C) 2016 Elsevier Ltd. All rights reserved.