相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Synthesis and electrochemical investigations of ABPBI grafted montmorillonite based polymer electrolyte membranes for PEMFC applications
Faizah Altaf et al.
RENEWABLE ENERGY (2021)
1550 nm pumped upconversion chromaticity modulation in Er3+ doped double perovskite LiYMgWO6 for anti-counterfeiting
Wenting Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Achieving excellent dielectric performance in polymer composites with ultralow filler loadings via constructing hollow-structured filler frameworks
Jie Yang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Discriminable Sensing Response Behavior to Homogeneous Gases Based on n-ZnO/p-NiO Composites
Wen-Dong Zhou et al.
NANOMATERIALS (2020)
Stereometric analysis of TiO2 thin films deposited by electron beam ion assisted
Reza Shakoury et al.
OPTICAL AND QUANTUM ELECTRONICS (2020)
Nanostructured tungsten trioxide prepared at various growth temperatures for sensing applications
Xi-Tao Yin et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
CO2 capture and separation on charge-modulated calcite
Lin Tao et al.
APPLIED SURFACE SCIENCE (2020)
Conductivity and mixed conductivity of a novel dense diffusion barrier and the sensing properties of limiting current oxygen sensors
Ke Shan et al.
DALTON TRANSACTIONS (2020)
Layer-structured BaTiO3/P(VDF-HFP) composites with concurrently improved dielectric permittivity and breakdown strength toward capacitive energy-storage applications
Liang Sun et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Y-doped CaZrO3/Co3O4 as novel dense diffusion barrier materials for a limiting current oxygen sensor
Ke Shan et al.
DALTON TRANSACTIONS (2020)
Ultrahigh discharge efficiency and improved energy density in rationally designed bilayer polyetherimide-BaTiO3/P(VDF-HFP) composites
Liang Sun et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Oxygen-vacancy-related giant permittivity and ethanol sensing response in SrTiO3-δ ceramics
H. Trabelsi et al.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2019)
Formation of the third bodies of steel sliding against brass under lubricated conditions
Lin Liu et al.
TRIBOLOGY INTERNATIONAL (2019)
Review on photocatalytic conversion of carbon dioxide to value-added compounds and renewable fuels by graphitic carbon nitride-based photocatalysts
Anise Akhundi et al.
CATALYSIS REVIEWS-SCIENCE AND ENGINEERING (2019)
Fabrication of core-shell structured Ni@BaTiO3 scaffolds for polymer composites with ultrahigh dielectric constant and low loss
Xiaotong Zhu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
The Effects of Nitrogen on Structure, Morphology and Electrical Resistance of Tantalum by Ion Implantation Method
Amir Hoshang Ramezani et al.
JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2018)
Design of n-Type Transparent Conducting Oxides: The Case of Transition Metal Doping in In2O3
Jian Xu et al.
ADVANCED ELECTRONIC MATERIALS (2018)
Effect of growth time on structural, morphological and electrical properties of tungsten oxide nanowire
S. A. A. Terohid et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Comparison between preparative methodologies of nanostructured carbon nitride and their use as selective photocatalysts in water suspension
Anise Akhundi et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2017)
Effect of Fe content on atomic and electronic structure of complex oxides Sr (Ti,Fe)O3-δ
Elena O. Filatova et al.
SOLID STATE IONICS (2017)
High performance magnetically recoverable g-C3N4/Fe3O4/Ag/Ag2SO3 plasmonic photocatalyst for enhanced photocatalytic degradation of water pollutants
Anise Akhundi et al.
ADVANCED POWDER TECHNOLOGY (2017)
A review of high-temperature electrochemical sensors based on stabilized zirconia
Tao Liu et al.
SOLID STATE IONICS (2015)
SrTi0.65Fe0.35O3 nanofibers for oxygen sensing
Jun-Li Song et al.
SOLID STATE IONICS (2015)
Effect of nanostructure on the thermal conductivity of La-doped SrTiO3 ceramics
Maria Teresa Buscaglia et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Synthesis and electrical properties of mixed-conducting YxSr1 _xTi0.6Fe0.4O3-δ
Ke Shan et al.
MATERIALS LETTERS (2014)
Preparation and characterization of La and Cr co-doped SrTiO3 materials for SOFC anode
Fenyun Yi et al.
CERAMICS INTERNATIONAL (2013)
Synthesis and electrical properties of Fe-doped Y0.08Sr0.92TiO3 mixed ionic-electronic conductor
Ke Shan et al.
MATERIALS LETTERS (2013)
Oxygen-sensing property of sol-gel-derived SrTi1-xFexO3-δ thin films with different iron concentrations (x=0.2-0.8)
Chee Lap Chow et al.
THIN SOLID FILMS (2013)
Y0.08Sr0.92FexTi1-xO3-δ perovskite for solid oxide fuel cell anodes
Jong Seol Yoon et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2012)
Microstructural and electrical characterization of Nb-doped SrTiO3-YSZ composites for solid oxide cell electrodes
B. R. Sudireddy et al.
SOLID STATE IONICS (2012)
Electrical conductivity and stability of A-site deficient (La, Sc) co-doped SrTiO3 mixed ionic-electronic conductor
Xue Li et al.
MATERIALS LETTERS (2011)
Electrical conductivity and structural stability of La-doped SrTiO3 with A-site deficiency as anode materials for solid oxide fuel cells
Xue Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)
Preparation and electrical properties of yttrium-doped strontium titanate with B-site deficiency
Feng Gao et al.
JOURNAL OF POWER SOURCES (2008)
Perovskite oxides for semiconductor-based gas sensors
Jeffrey W. Fergus
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Simulations and modeling of planar amperometric oxygen sensors
Jiwen Ren et al.
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Practical aspects in design of one-electrode semiconductor gas sensors: Status report
G. Korotcenkov
SENSORS AND ACTUATORS B-CHEMICAL (2007)
La0.4Sr0.6Ti1-xMnxO3-delta perovskites as anode materials for solid oxide fuel cells
QX Fu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)
Electrical behavior in gas-solid interface of gas sensors based on oxide semiconductors
Sung Pil Lee
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2006)
Lanthanum and nitrogen co-doped SrTiO3 powders as visible light sensitive photocatalyst
JS Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
The electrical properties and stability of SrTi0.65Fe0.35O3-δ thin films for automotive oxygen sensor applications
SJ Litzelman et al.
SENSORS AND ACTUATORS B-CHEMICAL (2005)
Temperature-independent resistive oxygen sensors based on SrTi1-xFexO3-δ solid solutions
A Rothschild et al.
SENSORS AND ACTUATORS B-CHEMICAL (2005)
Temperature-independent resistive oxygen exhaust gas sensor for lean-burn engines in thick-film technology
R Moos et al.
SENSORS AND ACTUATORS B-CHEMICAL (2003)
Stability and mixed ionic-electronic conductivity of (Sr,La)(Ti,Fe)O3-delta perovskites
DP Fagg et al.
SOLID STATE IONICS (2003)
Evaluation of yttrium-doped SrTiO3 as an anode for solid oxide fuel cells
SQ Hui et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)
Electrophoretic deposition of SrTi1-xMgxO3-δ films in oxygen sensor
TZ Ding et al.
SENSORS AND ACTUATORS B-CHEMICAL (2002)
Electrical properties of yttrium-doped strontium titanate under reducing conditions
SQ Hui et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)
Principles of solid state oxygen sensors for lean combustion gas control
E Ivers-Tiffée et al.
ELECTROCHIMICA ACTA (2001)
Transport properties and thermal expansion of Sr0.97Ti1-xFexO3-δ (x=0.2-0.8)
VV Kharton et al.
JOURNAL OF SOLID STATE CHEMISTRY (2001)
A new type of amperometric oxygen sensor based on a mixed-conducting composite membrane
ZY Peng et al.
SENSORS AND ACTUATORS B-CHEMICAL (2001)
Materials for temperature independent resistive oxygen sensors for combustion exhaust gas control
R Moos et al.
SENSORS AND ACTUATORS B-CHEMICAL (2000)
Faradaic efficiency and oxygen permeability of Sr0.97Ti0.60Fe0.40O3-δ perovskite
VV Kharton et al.
SOLID STATE IONICS (2000)
分享论文
