相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Numerical study for nanofluid behavior inside a storage finned enclosure involving melting process
Fanghua Li et al.
JOURNAL OF MOLECULAR LIQUIDS (2020)
Melting performance enhancement of a latent heat storage unit using gradient fins
Cheng Yu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Numerical investigation of an innovative discontinuous distribution of fins for solidification rate enhancement in PCM with and without nanoparticles
I Sarani et al.
APPLIED THERMAL ENGINEERING (2020)
Effects of fins arrangement and parameters on the consecutive melting and solidification of PCM in a latent heat storage unit
Changda Nie et al.
JOURNAL OF ENERGY STORAGE (2020)
Experimental investigation of thermal conductivity enhancement of carbon foam saturated with PCM and PCM/MWCNTs composite for energy storage systems
S. A. Nada et al.
HEAT AND MASS TRANSFER (2019)
Effects of fins geometries, arrangements, dimensions and numbers on natural convection heat transfer characteristics in finned-horizontal annulus
S. A. Nada et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Integrative passive and active cooling system using PCM and nanofluid for thermal regulation of concentrated photovoltaic solar cells
H. A. Nasef et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Simultaneous energy storage and recovery in the triplex-tube heat exchanger with PCM, copper fins and Al2O3 nanoparticles
Jasim M. Mahdi et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Numerical study on the effects of fins and nanoparticles in a shell and tube phase change thermal energy storage unit
Mohammad Parsazadeh et al.
APPLIED ENERGY (2018)
Solidification enhancement of PCM in a triplex-tube thermal energy storage system with nanoparticles and fins
Jasim M. Mahdi et al.
APPLIED ENERGY (2018)
Geometry and nanoparticle loading effects on the bio-based nano-PCM filled cylindrical thermal energy storage system
Soroush Ebadi et al.
APPLIED THERMAL ENGINEERING (2018)
Improving the thermal regulation and efficiency enhancement of PCM-Integrated PV modules using nano particles
S. A. Nada et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Possibility of using PCMs in temperature control and performance enhancements of free stand and building integrated PV modules
S. A. Nada et al.
RENEWABLE ENERGY (2018)
An experimental investigation of using carbon foam-PCM-MWCNTs composite materials for thermal management of electronic devices under pulsed power modes
W. G. Alshaer et al.
HEAT AND MASS TRANSFER (2017)
Numerical investigation of a triplex tube heat exchanger with phase change material: Simultaneous charging and discharging
Mahmood Mastani Joybari et al.
ENERGY AND BUILDINGS (2017)
Topology optimization for heat transfer enhancement in Latent Heat Thermal Energy Storage
Alberto Pizzolato et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Melting enhancement in triplex-tube latent thermal energy storage system using nanoparticles-fins combination
Jasim M. Mahdi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Effects of PCM arrangement and natural convection on charging and discharging performance of shell-and-tube LHS unit
Y. B. Tao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Thermal performance of a shell-and-tube latent heat thermal energy storage unit: Role of annular fins
Xiaohu Yang et al.
APPLIED ENERGY (2017)
Melting and solidification of PCM enhanced by radial conductive fins and nanoparticles in cylindrical annulus
A. Ali Rabienataj Darzi et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins
Manish K. Rathod et al.
APPLIED THERMAL ENGINEERING (2015)
Numerical investigations of using carbon foam/PCM/Nano carbon tubes composites in thermal management of electronic equipment
W. G. Alshaer et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Comprehensive parametric study of using carbon foam structures saturated with PCMs in thermal management of electronic systems
S. A. Nada et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Numerical investigation on the melting of nanoparticle-enhanced phase change materials (NEPCM) in a bottom-heated rectangular cavity using lattice Boltzmann method
Yongchang Feng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Thermal management of electronic devices using carbon foam and PCM/nano-composite
W. G. Alshaer et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
被撤回的出版物: Melting of nanoparticles-enhanced phase change material (NEPCM) in vertical semicircle enclosure: numerical study (Retracted article. See vol. 36, pg. 513, 2022)
Mahmoud Jourabian et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with fins
Abduljalil A. Al-Abidi et al.
ENERGY AND BUILDINGS (2014)
Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers
Abduljalil A. Al-Abidi et al.
APPLIED THERMAL ENGINEERING (2013)
Enhance heat transfer for PCM melting in triplex tube with internal-external fins
Sohif Mat et al.
ENERGY CONVERSION AND MANAGEMENT (2013)
Experimental and numerical investigation of melting of phase change material/nanoparticle suspensions in a square container subjected to a constant heat flux
Nabeel S. Dhaidan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Natural convection heat transfer of nanofluids along a vertical plate embedded in porous medium
Ziya Uddin et al.
NANOSCALE RESEARCH LETTERS (2013)
Solidification of nano-enhanced phase change material (NEPCM) in a wavy cavity
S. Kashani et al.
HEAT AND MASS TRANSFER (2012)
Numerical simulation on phase-change thermal storage/release in a plate-fin unit
Wei-Biao Ye et al.
APPLIED THERMAL ENGINEERING (2011)
Numerical study of fluid dynamic and heat transfer performance of Al2O3 and CuO nanofluids in the flat tubes of a radiator
Ravikanth S. Vajjha et al.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2010)
Experimental determination of thermal conductivity of three nanofluids and development of new correlations
Ravikanth S. Vajjha et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
A numerical and experimental investigation of different containers and PCM options for cold storage modular units for domestic applications
K. A. R. Ismail et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Numerical and Experimental Study of Solidification in a Spherical Shell
E. Assis et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2009)
Performance enhancement in latent heat thermal storage system: A review
S. Jegadheeswaran et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2009)
Experimental investigation of novel indirect solar cooker with indoor PCM thermal storage and cooking unit
H. M. S. Hussein et al.
ENERGY CONVERSION AND MANAGEMENT (2008)
Experimental investigation of natural convection heat transfer in horizontal and inclined annular fluid layers
S. A. Nada
HEAT AND MASS TRANSFER (2008)
Numerical and experimental study of melting in a spherical shell
E. Assis et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
Nanoparticle-enhanced phase change materials (NEPCM) with great potential for improved thermal energy storage
J. M. Khodadadi et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2007)
Experimental and numerical investigation of thermal energy storage with a finned tube
A Erek et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2005)
An experimental study of enhanced heat transfer in rectangular PCM thermal storage
U Stritih
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2004)
Theoretical study of transient response of a rectangular latent heat thermal energy storage system with conjugate forced convection
H El Qarnia
ENERGY CONVERSION AND MANAGEMENT (2004)
分享论文
