相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Characterization of SLM-fabricated Inconel 718 after solid solution and precipitation hardening heat treatments
Wakshum M. Tucho et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Ross Cunningham et al.
SCIENCE (2019)
Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy
Kaiwen Wei et al.
MATERIALS CHARACTERIZATION (2019)
Effect of scanning strategy on mechanical properties of selective laser melted Inconel 718
H. Y. Wan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion
Dillon S. Watring et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
Changhao Pei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics
Nadia Kouraytem et al.
PHYSICAL REVIEW APPLIED (2019)
Hot isostatic pressing (HIP) to achieve isotropic microstructure and retain as-built strength in an additive manufacturing titanium alloy (Ti-6Al-4V)
Jake Benzing et al.
MATERIALS LETTERS (2019)
Process Mapping and In-Process Monitoring of Porosity in Laser Powder Bed Fusion Using Layerwise Optical Imaging
Farhad Imani et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Relating porosity to fatigue failure in additively manufactured alloy 718
Luke Sheridan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of building direction on porosity and fatigue life of selective laser melted AlSi12Mg alloy
Junwen Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of Nb on δ Phase Precipitation and the Tensile Properties in Cast Alloy IN625
Yiqiang Mu et al.
METALS (2018)
Influence of build layout and orientation on microstructural characteristics of electron beam melted Alloy 718
P. Karimi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Overview on Microstructure- and Defect-Sensitive Fatigue Modeling of Additively Manufactured Materials
Brian Torries et al.
JOM (2018)
Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
K. Moussaoui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of stainless steel 316L vertical struts manufactured by laser powder bed fusion process
Xianglong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Electron Backscatter Diffraction Analysis of Inconel 718 Parts Fabricated by Selective Laser Melting Additive Manufacturing
Xiaoqing Wang et al.
JOM (2017)
Review on powder-bed laser additive manufacturing of Inconel 718 parts
Xiaoqing Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
S. Beretta et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
Wakshum M. Tucho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718
Shang Sui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
Ahmad Mostafa et al.
METALS (2017)
Effects of processing routes on room temperature tensile strength and elongation for Inconel 718
Yung-Ta Chen et al.
MATERIALS & DESIGN (2017)
In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing
Umberto Scipioni Bertoli et al.
MATERIALS & DESIGN (2017)
Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
Hui Xiao et al.
MATERIALS & DESIGN (2017)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Unexpected δ-Phase Formation in Additive-Manufactured Ni-Based Superalloy
Y. Idell et al.
JOM (2016)
Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
M. M. Kirka et al.
JOM (2016)
Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
Tanja Trosch et al.
MATERIALS LETTERS (2016)
Superior creep strength of a nickel-based superalloy produced by selective laser melting
M. Proebstle et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Laves phase in alloy 718 fusion zone - microscopic and calorimetric studies
S. G. K. Manikandan et al.
MATERIALS CHARACTERIZATION (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Yong Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W
Chandrika Kamath et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
Qingbo Jia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Wayne E. King et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Microstructural and texture development in direct laser fabricated IN718
Lakshmi L. Parimi et al.
MATERIALS CHARACTERIZATION (2014)
Rationalization of Microstructure Heterogeneity in INCONEL 718 Builds Made by the Direct Laser Additive Manufacturing Process
Yuan Tian et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material
Joaquim Ciurana et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components
Jon Lambarri et al.
OPTICS AND LASERS IN ENGINEERING (2013)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
Numerical prediction of heat affected layer in the EDM of aeronautical alloys
B. Izquierdo et al.
APPLIED SURFACE SCIENCE (2012)
Normal spectral emittance of Inconel 718 aeronautical alloy coated with yttria stabilized zirconia films
L. Gonzalez-Fernandez et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Zemin Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Fiji: an open-source platform for biological-image analysis
Johannes Schindelin et al.
NATURE METHODS (2012)
Geometrically necessary dislocation density distributions in Ti-6Al-4V deformed in tension
P. D. Littlewood et al.
ACTA MATERIALIA (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Improvement of mechanical properties of Inconel 718 electron beam welds-influence of welding techniques and postweld heat treatment
G. Madhusudhana Reddy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
H. Qi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Tool-life and wear mechanisms of CBN tools in machining of Inconel 718
J. P. Costes et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
A new experimental technique for measuring strain and residual stresses during a laser remelting process
J Grum et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Structure of continuously cast Ni-based superalloy Inconel 713C
F Zupanic et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)