4.5 Article

Machine learning prediction of higher heating value of biomass

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Civil

Numerical Study of Panel Zone in a Moment Connection without Continuity Plates

Alireza Rezaeian et al.

Summary: Built-up box columns are commonly used in earthquake-prone regions, and this study investigates the impact of continuity plates on these columns through experiments and numerical analysis. The experimental results show that the connections meet the standards for special moment resisting frames (SMRF) and using back plates in complete joint penetration (CJP) welding is superior.

JOURNAL OF EARTHQUAKE ENGINEERING (2022)

Article Computer Science, Interdisciplinary Applications

A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement

Mahdi Shariati et al.

Summary: The study introduces a novel hybrid ELM-GWO model to predict the compressive strength of concrete with partial replacements for cement. The results demonstrate that combining the ELM model with GWO can efficiently improve performance, leading to superior performance indices compared to other models.

ENGINEERING WITH COMPUTERS (2022)

Article Computer Science, Interdisciplinary Applications

A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques

Mahdi Shariati et al.

Summary: The study explores the use of artificial intelligence techniques for predicting the shear strength of C-shaped shear connectors. Slip and inclination angle are found to be the most influential factors on the shear strength. Considering only four parameters is sufficient for accurate predictions, and the extreme learning machine (ELM) performs slightly better than the artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) in terms of time and performance indices.

ENGINEERING WITH COMPUTERS (2021)

Article Plant Sciences

Combined Application of Arbuscular Mycorrhizal Fungi and Exogenous Melatonin Alleviates Drought Stress and Improves Plant Growth in Tobacco Seedlings

Ling Liu et al.

Summary: Studies have shown that the application of arbuscular mycorrhizal (AM) fungi or exogenous melatonin (MT) can alleviate drought stress and improve plant growth, but the additive effects of both treatments are more effective in combination under drought stress conditions.

JOURNAL OF PLANT GROWTH REGULATION (2021)

Article Nanoscience & Nanotechnology

Hot isostatic pressing of a near α-Ti alloy: Temperature optimization, microstructural evolution and mechanical performance evaluation

Chao Cai et al.

Summary: Hot isostatic pressing (HIP) has advantages in processing difficult-to-process materials like the near-alpha titanium alloy Ta15 for aerospace applications. This study analyzed the phase constitutions, microstructural evolution, and tensile properties of HIP Ta15 specimens at different temperatures compared to Spark Plasma Sintering (SPS) counterparts. The results showed that HIP specimens at 500 degrees C exhibited higher tensile strength and ductility than SPS specimens, and had comparable high-temperature tensile properties to forged IMI 685 and better than sintered Ti60 parts.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Construction & Building Technology

Gradation Segregation Characteristic and Its Impact on Performance of Asphalt Mixture

Huanan Yu et al.

Summary: This study proposed a set of segregation evaluation indexes that divided gradation types into five levels, evaluating the impact of various segregation levels on the volumetrics, mechanical performance, and road performance of asphalt pavement. The result showed that the degree of aggregate segregation significantly affects the performance of asphalt mixtures.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Article Engineering, Industrial

Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion

Chao Cai et al.

Summary: A systematic comparison of polyamide 12 (PA12) parts printed by Selective Laser Sintering (SLS) and Multi Jet Fusion (MJF) techniques revealed that MJF-printed specimens had slightly stronger mechanical strength and smoother front and side surfaces than SLS-printed counterparts.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Review Engineering, Environmental

A review: Comparison of multi-air-pollutant removal by advanced oxidation processes - Industrial implementation for catalytic oxidation processes

Ben Wang et al.

Summary: Integrated pollutant removal technology, especially the Fenton-based method, has shown advantages in operation cost and application prospect compared to traditional methods such as wet flue gas desulfurization and selective catalytic reduction. The research in this area focuses on the catalytic mechanism of different metal-element doping catalysts for multi-air-pollutant removal. The industrialization prospects and feasibility of Fenton-based methods have been systematically analyzed in this paper, providing insights for future applications in pollutant removal.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Construction & Building Technology

Performance of self-centering steel moment frame considering stress relaxation in prestressed cables

Seyyed Morteza Asadolahi et al.

ADVANCES IN STRUCTURAL ENGINEERING (2020)

Review Materials Science, Multidisciplinary

Big data management in the mining industry

Chong-chong Qi

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)

Article Green & Sustainable Science & Technology

Struvite pyrolysate cycling technology assisted by thermal hydrolysis pretreatment to recover ammonium nitrogen from composting leachate

Tao Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Engineering, Mechanical

Automatic detection of feather defects using Lie group and fuzzy Fisher criterion for shuttlecock production

Hongwei Yue et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Article Physics, Multidisciplinary

Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes

Maryam Safa et al.

PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)

Article Computer Science, Artificial Intelligence

Scalable Digital Neuromorphic Architecture for Large-Scale Biophysically Meaningful Neural Network With Multi-Compartment Neurons

Shuangming Yang et al.

IEEE TRANSACTIONS ON NEURAL NETWORKS AND LEARNING SYSTEMS (2020)

Article Engineering, Environmental

Adsorption behaviors of shale oil in kerogen slit by molecular simulation

Yongfei Yang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Biology

Progress of ethylene action mechanism and its application on plant type formation in crops

Weiqiang Zhang et al.

SAUDI JOURNAL OF BIOLOGICAL SCIENCES (2020)

Article Thermodynamics

Experimental study on transient heat/mass transfer characteristics during static flash of aqueous NaCl solution

Dan Zhang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Article Materials Science, Multidisciplinary

Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance

Chao Cai et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Article Engineering, Civil

Crushing of steel tubes with different infills under partial axial loading

Tohid Ghanbari-Ghazijahani et al.

THIN-WALLED STRUCTURES (2020)

Article Metallurgy & Metallurgical Engineering

Controlling deflection of long steel I-shaped girder bridge using two V-shaped pre-tensioning cables

Fatemeh Partovi et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Article Environmental Sciences

Energy Efficiency Modeling of Integrated Energy System in Coastal Areas

Chao Yang et al.

JOURNAL OF COASTAL RESEARCH (2020)

Review Optics

Microscopic fringe projection profilometry: A review

Yan Hu et al.

OPTICS AND LASERS IN ENGINEERING (2020)

Article Computer Science, Hardware & Architecture

LCHR-TSV: Novel Low Cost and Highly Repairable Honeycomb-Based TSV Redundancy Architecture for Clustered Faults

Tianming Ni et al.

IEEE TRANSACTIONS ON COMPUTER-AIDED DESIGN OF INTEGRATED CIRCUITS AND SYSTEMS (2020)

Review Materials Science, Multidisciplinary

Mechanics and safety issues in tailing-based backfill: A review

Xu Zhao et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)

Article Materials Science, Multidisciplinary

Safety of barricades in cemented paste-backfilled stopes

Xu Zhao et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2020)

Article Engineering, Electrical & Electronic

Non-Intrusive Online Distributed Pulse Shrinking-Based Interconnect Testing in 2.5D IC

Tianming Ni et al.

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS (2020)

Article Engineering, Electrical & Electronic

Resolution Analysis in a Lens-Free On-Chip Digital Holographic Microscope

Jialin Zhang et al.

IEEE TRANSACTIONS ON COMPUTATIONAL IMAGING (2020)

Article Construction & Building Technology

Modeling the compressive strength of high-strength concrete: An extreme learning approach

Abobakr Khalil Al-Shamiri et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Chemistry, Analytical

Ordered gold nanoparticle arrays on the tip of silver wrinkled structures for single molecule detection

Hao Guo et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Mathematics, Applied

Forecast of the higher heating value in biomass torrefaction by means of machine learning techniques

P. J. Garcia Nieto et al.

JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS (2019)

Article Construction & Building Technology

A BIM-based approach for predicting corrosion under insulation

Yuan-Hao Tsai et al.

AUTOMATION IN CONSTRUCTION (2019)

Article Automation & Control Systems

A Fuzzy Optimization Strategy for the Implementation of RBF LSSVR Model in VisNIR Analysis of Pomelo Maturity

Huazhou Chen et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

Article Materials Science, Multidisciplinary

An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon

Xu Zhao et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2019)

Article Chemistry, Analytical

Catalytic reforming of volatiles from co-pyrolysis of lignite blended with corn straw over three different structures of iron ores

Hongyu Zhao et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2019)

Review Biochemical Research Methods

A Review on the Recent Developments of Sequence-based Protein Feature Extraction Methods

Jun Zhang et al.

CURRENT BIOINFORMATICS (2019)

Proceedings Paper Energy & Fuels

Prediction of higher heating values (HHVs) and energy yield during torrefaction via kinetics

Bo-Jhih Lin et al.

INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)

Article Food Science & Technology

Antibacterial activity and mechanism of bifidocin A against Listeria monocytogenes

Guorong Liu et al.

FOOD CONTROL (2017)

Article Multidisciplinary Sciences

High-resolution transport-of-intensity quantitative phase microscopy with annular illumination

Chao Zuo et al.

SCIENTIFIC REPORTS (2017)

Article Agronomy

Multi-scale evapotranspiration of summer maize and the controlling meteorological factors in north China

Baozhong Zhang et al.

AGRICULTURAL AND FOREST METEOROLOGY (2016)

Article Energy & Fuels

Prediction model of higher heating value of torrefied biomass based on the kinetics of biomass decomposition

Nitipong Soponpongpipat et al.

JOURNAL OF THE ENERGY INSTITUTE (2016)

Article Energy & Fuels

New pore space characterization method of shale matrix formation by considering organic and inorganic pores

Yongfei Yang et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2015)

Article Computer Science, Artificial Intelligence

Extreme learning machine: Theory and applications

Guang-Bin Huang et al.

NEUROCOMPUTING (2006)

Article Computer Science, Artificial Intelligence

Learning capability and storage capacity of two-hidden-layer feedforward networks

GB Huang

IEEE TRANSACTIONS ON NEURAL NETWORKS (2003)