相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A review of methods of random surface topography modeling
Pawel Pawlus et al.
TRIBOLOGY INTERNATIONAL (2020)
A Novel Methodology for Comprehensive Modeling of the Kinetic Behavior of Steerable Catheters
Xiaohua Hu et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2019)
Friction predication on pin-to-plate interface of PTFE material and steel
Zhuming Bi et al.
FRICTION (2019)
Lubricated elastoplastic contact model for metal forming processes in OpenFOAM
Vanja Skuric et al.
COMPUTERS & FLUIDS (2018)
Inefficiency predictions in a hypoid gear pair through tribodynamics analysis
L. Paouris et al.
TRIBOLOGY INTERNATIONAL (2018)
Effects of lubricant rheology and impact speed on EHL film thickness at pure squeeze action
Josef Fryza et al.
TRIBOLOGY INTERNATIONAL (2017)
Theoretical and experimental research on the friction coefficient of water lubricated bearing with consideration of wall slip effects
Zhongliang Xie et al.
MECHANICS & INDUSTRY (2016)
Fully coupled EHL model for simulation of finite length line cam-roller follower contacts
M. Shirzadegan et al.
TRIBOLOGY INTERNATIONAL (2016)
Impact of high pressure and shear thinning on journal bearing friction
D. E. Sander et al.
TRIBOLOGY INTERNATIONAL (2015)
Experimental comparison of five friction models on the same test-bed of the micro stick-slip motion system
Y. F. Liu et al.
MECHANICAL SCIENCES (2015)
Modeling and control of piezoelectric inertia-friction actuators: review and future research directions
Y. F. Liu et al.
MECHANICAL SCIENCES (2015)
Investigation on wear prediction model of dental restoration material based on ensemble learning
K. Zheng et al.
MATERIALS RESEARCH INNOVATIONS (2014)
A numerical study on the performance of straight bevel gears operating under mixed lubrication regime
Aref Bahrami Ghahnavieh et al.
MECHANISM AND MACHINE THEORY (2014)
Modeling and prediction of wear at revolute clearance joints in flexible multibody systems
Bo Zhao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2014)
On the role of second Newtonian viscosity in EHL point contacts using double Newtonian shear-thinning model
Puneet Katyal et al.
TRIBOLOGY INTERNATIONAL (2014)
Rolling Friction: Comparison of Analytical Theory with Exact Numerical Results
Michele Scaraggi et al.
TRIBOLOGY LETTERS (2014)
Prediction of Dynamic Characteristics of a Bump-Type Foil Bearing Structure with Consideration of Dynamic Friction
Kai Feng et al.
TRIBOLOGY TRANSACTIONS (2014)
Finite element implementation of a varied friction model applied to torsional fretting wear
J. Liu et al.
WEAR (2014)
Friction and Wear Mechanisms of Tungsten-Carbon Systems: A Comparison of Dry and Lubricated Conditions
Pantcho Stoyanov et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Nonequilibrium Molecular Simulations of New Ionic Lubricants at Metallic Surfaces: Prediction of the Friction
Ana C. F. Mendonca et al.
JOURNAL OF CHEMICAL THEORY AND COMPUTATION (2013)
The Effect of Nanoparticles on the Real Area of Contact, Friction, and Wear
Hamed Ghaednia et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2013)
Towards the true prediction of EHL friction
M. Bjorling et al.
TRIBOLOGY INTERNATIONAL (2013)
Predicting Film Parameter and Friction Coefficient for Helical Gears Considering Surface Roughness and Load Variation
Lin Han et al.
TRIBOLOGY TRANSACTIONS (2013)
Survival and factorial analysis of durability and friction coefficient of a solid lubricant under different working conditions
J. Yang et al.
WEAR (2013)
An engineering approach for the prediction of wear in mixed lubricated contacts
Ali Beheshti et al.
WEAR (2013)
Development and characterization of a novel piezoelectric-driven stick-slip actuator with anisotropic-friction surfaces
Q. S. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Piezoelectric friction-inertia actuator-a critical review and future perspective
Z. M. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Measured and Predicted Static Friction for Real Rough Surfaces in Point Contact
Jose M. Garcia et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2012)
Effect of lubricant selection on EHL performance of involute spur gears
P. Anuradha et al.
TRIBOLOGY INTERNATIONAL (2012)
Artificial neural networks based prediction of wear and frictional behaviour of aluminium (A380)-fly ash composites
K. Ravi Kumar et al.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2012)
Modeling of directional friction on a fully lubricated surface with regular anisotropic asperities
Z. M. Zhang et al.
MECCANICA (2011)
Analytical model for predicting the friction coefficient in point contacts with thermal elastohydrodynamic lubrication
J. Echavarri Otero et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2011)
Subscale tribofilm tribological modelling in boundary lubrication using multivariate analysis
R. Roshan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2011)
Experimental investigation and neural network prediction of brakes and clutch material frictional behaviour considering the sliding acceleration influence
A. Senatore et al.
TRIBOLOGY INTERNATIONAL (2011)
From Continuous to Molecular Scale in Modelling Elastohydrodynamic Lubrication: Nanoscale Surface Slip Effects on Film Thickness and Friction
N. Fillot et al.
TRIBOLOGY LETTERS (2011)
A non-Newtonian model based on Ree-Eyring theory and surface effect to predict friction in elastohydrodynamic lubrication
Elie Bou-Chakra et al.
TRIBOLOGY INTERNATIONAL (2010)
Effect of Surface Pattern on Stribeck Curve
S. Akbarzadeh et al.
TRIBOLOGY LETTERS (2010)
Rheology and high-pressure models for quantitative elastohydrodynamics
S. Bair
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2009)
Models for predicting friction coefficient and parameters with influence in elastohydrodynamic lubrication
P. Lafont Morgado et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2009)
Friction models incorporating thermal effects in highly precision actuators
J. W. Li et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2009)
Dimples shape and distribution effect on characteristics of Stribeck curve
Lidia Galda et al.
TRIBOLOGY INTERNATIONAL (2009)
Performance of spur gears considering surface roughness and shear thinning lubricant
S. Akbarzadeh et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2008)
Thermal effect on piezoelectric stick-slip actuator systems
J. W. Li et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2008)
Influence of roughness parameters on coefficient of friction under lubricated conditions
Pradeep L. Menezes et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2008)
Wear prediction of friction material and brake squeal using the finite element method
Abd Rahim AbuBakar et al.
WEAR (2008)
Analytical model development for the prediction of the frictional resistance of a capsule endoscope inside an intestine
J-S Kim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2007)
Static friction experiments and verification of an improved elastic-plastic model including roughness effects
Chul-Hee Lee et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2007)
An experimental investigation of dimple effect on the stribeck curve of journal bearings
Xiaobin Lu et al.
TRIBOLOGY LETTERS (2007)
A universal wear law for abrasion
Matthew T. Siniawski et al.
WEAR (2007)
Artificial neural network application to the friction-stir welding of aluminum plates
Hasan Okuyucu et al.
MATERIALS & DESIGN (2007)
Development of a set of Stribeck curves for conformal contacts of rough surfaces
Yansong Wang et al.
TRIBOLOGY TRANSACTIONS (2006)
Characterization of the effect of surface roughness and texture on fluid flow - past, present, and future
James B. Taylor et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2006)
The Stribeck curve: Experimental results and theoretical prediction
Xiaobin Lu et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2006)
A model for wear and friction in cylinder liners and piston rings
Zheng Ma et al.
TRIBOLOGY TRANSACTIONS (2006)
EHL film thickness computations at low speeds: risk of artificial trends as a result of poor accuracy and implications for mixed lubrication modelling
CH Venner
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2005)
Finite element analysis and experiments of metal/metal wear in oscillatory contacts
NH Kim et al.
WEAR (2005)
A unified shear-thinning treatment of both film thickness and traction in EHD
S Bair et al.
TRIBOLOGY LETTERS (2005)
Finite element simulation and experimental validation of fretting wear
IR McColl et al.
WEAR (2004)
Modeling of film thickness and traction in a variable ratio traction drive rig
KJ Sharif et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2004)
A non-Newtonian model based on limiting shear stress and slip planes - parametric studies
J Stahl et al.
TRIBOLOGY INTERNATIONAL (2003)
The properties of asperities of real surfaces
JJ Wu
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2001)
A numerical model of friction between rough surfaces
YA Karpenko et al.
TRIBOLOGY INTERNATIONAL (2001)
An average flow model of rough surface lubrication with inter-asperity cavitation
SR Harp et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2001)
Finite-element modeling of dry sliding wear in metals
JF Molinari et al.
ENGINEERING COMPUTATIONS (2001)
Calculation of Stribeck curves for line contacts
ERM Gelinck et al.
TRIBOLOGY INTERNATIONAL (2000)