Grain size dependence of twinning behaviors and resultant cryogenic impact toughness in high manganese austenitic steel

Two high manganese austenitic steels with different grain size were prepared to comprehensively investigate size effect on twinning and resultant cryogenic impact toughness at -196 degrees C. The microstructure was characterized by means of electron back-scattered diffraction, transmission electron microscopy and X-ray diffraction. It is found that the Charpy impact absorbed energy can be enhanced by 36% via increasing grain size from similar to 11 to similar to 47 mu m, exhibiting an inverse size effect of cryogenic impact toughness. The major difference in deformed microstructure is that the number fraction of type III grains (intense twinning in grain interior) increases from similar to 16% to similar to 56% as the grain size increases from similar to 11 to similar to 47 mu m. Moreover, it has been demonstrated that the larger grain size, inducing better Charpy impact toughness at -196 degrees C, is due to the following aspects: (1) stronger dynamic grain refinement; (2) higher dislocation density and wider extended dislocations contributing to stronger strain hardening and better plasticity as well as (3) relatively homogeneous plastic deformation. (C) 2020 The Author(s). Published by Elsevier B.V.

Automated summary

Two high manganese austenitic steels with different grain sizes were prepared to investigate size effect on twinning and cryogenic impact toughness. Increasing grain size from 11 to 47 μm enhanced Charpy impact absorbed energy by 36%, showing an inverse size effect on cryogenic impact toughness. The larger grain size resulted in better impact toughness at -196 degrees C due to stronger dynamic grain refinement, higher dislocation density, wider extended dislocations, and relatively homogeneous plastic deformation.