相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of dilution on micro hardness of Ni-Cr-B-Si alloy hardfaced on austenitic stainless steel plate for sodium-cooled fast reactor applications
S. Balaguru et al.
NUCLEAR ENGINEERING AND TECHNOLOGY (2020)
In-situ (Ti,Nb)C reinforced Ni-based coatings: New insights into microstructure evolution, enhanced phase configuration behavior and tribological properties
Mingyang Zhang et al.
CERAMICS INTERNATIONAL (2020)
Investigations on different hardfacing processes for High temperature applications of Ni-Cr-B-Si alloy hardfaced on austenitic stainless steel components
S. Balaguru et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Wear resistance of TiN or AlTiN nanostructured Ni-based hardfacing by PTA under pin on disc test
M. Alvarez-Vera et al.
WEAR (2019)
Surface engineering-controlled tribological behavior and adhesion strength of Ni-Cr coating sprayed onto carburized AISI 4340 steel substrate
Auezhan Amanov
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of laser cladding and laser-induction hybrid cladding coatings on the bending properties and fracture behavior of rails
Li Meng et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Weld overlay coating of Inconel 617 M on type 316 L stainless steel by cold metal transfer process
Paulson Varghese et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Influence of Mo on the high temperature wear performance of NiCrBSi hardfacings
Shaikh Asad Ali Dilawary et al.
TRIBOLOGY INTERNATIONAL (2018)
Characteristics of Fe-, Ni- and Co-based powder coatings fabricated by laser metal deposition without preheating the base material
Pedro Ramiro et al.
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Friction and wear behaviour of Ni-Cr-B hardface coating on 316LN stainless steel in liquid sodium at elevated temperature
Hemant Kumar et al.
JOURNAL OF NUCLEAR MATERIALS (2017)
Short Communication on Self-welding susceptibility of NiCr-B hardfaced coating with and without NiCr-B coating on 316LN stainless steel in flowing sodium at elevated temperature
Hemant Kumar et al.
JOURNAL OF NUCLEAR MATERIALS (2017)
Low temperature pressureless immediate sintering of a novel nanostructured WC/Co/NiCrSiB-alloy cemented carbide
H. Amel-Farzad et al.
SCRIPTA MATERIALIA (2017)
Effect of matrix chemistry and WC types on the performance of Ni-WC based MMC overlays deposited by plasma transferred arc (PTA) welding
Ravikumar Sundaramoorthy et al.
WEAR (2017)
Effects of Different Operating Temperatures on the Tensile Properties of the Grid Plate Hardfaced with Colmonoy in a Pool Type Sodium Fast Reactor
S. Balaguru et al.
SCIENCE AND TECHNOLOGY OF NUCLEAR INSTALLATIONS (2017)
Fiber laser cladding of nickel-based alloy on cast iron
F. Arias-Gonzalez et al.
APPLIED SURFACE SCIENCE (2016)
Laser cladding strategies for producing WC reinforced NiCr coatings inside twin barrels
Josu Leunda et al.
SURFACE & COATINGS TECHNOLOGY (2016)
NiCrSiBC coatings: Effect of dilution on microstructure and high temperature tribological behavior
Leandro J. da Silva et al.
WEAR (2016)
Measurement of the Residual Stresses and Investigation of Their Effects on a Hardfaced Grid Plate due to Thermal Cycling in a Pool Type Sodium-Cooled Fast Reactor
S. Balaguru et al.
SCIENCE AND TECHNOLOGY OF NUCLEAR INSTALLATIONS (2016)
Fatigue life of laser clad hardfacing alloys on AISI 4130 steel under rotary bending fatigue test
Novana Hutasoit et al.
INTERNATIONAL JOURNAL OF FATIGUE (2015)
Study of magnetism in Ni-Cr hardface alloy deposit on 316LN stainless steel using magnetic force microscopy
G. V. K. Kishore et al.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)
Microstructural and microchemical characterization of Ni-Ta-Al-Cr-C coating layer on austenitic stainless steel AISI 310
K. Wieczerzak et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Effect of the substrate dilution on the room and high temperature tribological behaviour of Ni-based coatings deposited by PTA on grey cast iron
F. Fernandes et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Improving cavitation erosion resistance of austenitic stainless steel in liquid sodium by hardfacing - comparison of Ni and Co based deposits
B. K. Sreedhar et al.
WEAR (2015)
Mass transfer of the nickel-base alloy covered electrode with neutral flux coating during shielded metal arc welding
Renyao Qin et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Influence of Fe on the room and high-temperature sliding wear of NiAl coatings
C. Brunetti et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Study on microstructure and wear properties of different nickel base hardfacing alloys deposited on austenitic stainless steel
Gopa Chakraborty et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Influence of Welding Speed over Dilution for Circular Grid plate Hardfaced with Colmonoy-5
S. Balaguru et al.
AEROSPACE AND MECHANICAL ENGINEERING (2014)
Microstructural design of hardfacing Ni-Cr-B-Si-C alloys
I. Hemmati et al.
ACTA MATERIALIA (2013)
Toughening mechanism for Ni-Cr-B-Si-C laser deposited coatings
I. Hemmati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
High temperature corrosion studies of cermet particle reinforced NiCrBSi hardfacings
H. Rojacz et al.
SURFACE & COATINGS TECHNOLOGY (2013)
High temperature wear of cermet particle reinforced NiCrBSi hardfacings
A. Zikin et al.
TRIBOLOGY INTERNATIONAL (2013)
Influence of nanostructured ZrO2 additions on the wear resistance of Ni-based alloy coatings deposited by APS process
F. Fernandes et al.
WEAR (2013)
A Study on the Influence of PTAW Process Parameters on Pitting Corrosion Resistance of Nickel Based Overlays
K. Siva et al.
INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013) (2013)
Effects of the alloy composition on phase constitution and properties of laser deposited Ni-Cr-B-Si coatings
I. Hemmati et al.
LASERS IN MANUFACTURING (LIM 2013) (2013)
Dilution effects in laser cladding of Ni-Cr-B-Si-C hardfacing alloys
I. Hemmati et al.
MATERIALS LETTERS (2012)
Mapping the micro-abrasion resistance of a Ni-based coating deposited by PTA on gray cast iron
F. Fernandes et al.
WEAR (2012)
Effects of surface alloying on microstructure and wear behavior of ductile iron surface-modified with a nickel-based alloy using shielded metal arc welding
R. Arabi Jeshvaghani et al.
MATERIALS & DESIGN (2011)
Effect of carbide degradation in a Ni-based hardfacing under abrasive and combined impact/abrasive conditions
C. Katsich et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Phase transformation of NiCrBSi-WC and NiBSi-WC arc sprayed coatings
Panadda Niranatlumpong et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Effect of arc current on microstructure and wear characteristics of a Ni-based coating deposited by PTA on gray cast iron
F. Fernandes et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Effects of graphite content on microstructure and tribological properties of graphite/TiC/Ni-base alloy composite coatings
Cai Bin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Influence of aging treatment on microstructure, wear and corrosion behavior of a nickel base hardfaced coating
D. Kesavan et al.
WEAR (2011)
Corrosion behaviour of vacuum induction-melted Ni-based alloy in sulphuric acid
J. H. Chang et al.
CORROSION SCIENCE (2010)
Influence of Al on the microstructure and carburization performance of a N-based alloy coating
Feliciano Jose Ricardo Cangue et al.
MATERIALS CHEMISTRY AND PHYSICS (2010)
Study of Magnetism in Colmonoy-6 (AWS NiCr-C) Deposit on 316LN Stainless Steel
Gopa Chakraborty et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2010)
Laser cladding of Colmonoy 6 powder on AISI316L austenitic stainless steel
H. Zhang et al.
NUCLEAR ENGINEERING AND DESIGN (2010)
Microstructure and bonding behavior on the interface of an induction-melted Ni-based alloy coating and AISI 4140 steel substrate
J. H. Chang et al.
SURFACE & COATINGS TECHNOLOGY (2010)
The microstructure and high temperature wear performance of a nickel base hardfaced coating
D. Kesavan et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Influence of alloy chemistry on microstructure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding (PTAW)
T. Liyanage et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Materials science research for sodium cooled fast reactors
Baldev Raj
BULLETIN OF MATERIALS SCIENCE (2009)
Effects of molybdenum on the microstructure and wear resistance of nickel-based hardfacing alloys investigated using Rietveld method
Q. Y. Hou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Microchemical and microstructural studies in a PTA weld overlay of Ni-Cr-Si-B alloy on AISI 304L stainless steel
C. Sudha et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Influence of welding parameters on microstructure and wear behaviour of a typical NiCrBSi hardfacing alloy reinforced with tungsten carbide
E. Badisch et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Microstructural and tribological comparison of HVOF-sprayed and post-treated M-Mo-Cr-Si (M = Co, Ni) alloy coatings
Giovanni Bolelli et al.
WEAR (2007)
Microstructural aspects of plasma transferred arc surfaced Ni-based hardfacing alloy
K. Gurumoorthy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Dry machinability of nickel-based weld-hardfacing layers for hot tooling
M. El Mansori et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Laser rapid manufacturing of Colmonoy-6 components
C. P. Paul et al.
OPTICS AND LASERS IN ENGINEERING (2006)
Sliding wear resistance of Fe-, Ni- and Co-based alloys for plasma deposition
Tadeusz Hejwowski
VACUUM (2006)
Abrasive wear behaviour of laser clad and flame sprayed-melted NiCrBSi coatings
C. Navas et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Selection of hardfacing material for components of the Indian prototype fast breeder reactor
AK Bhaduri et al.
JOURNAL OF NUCLEAR MATERIALS (2004)
Wear performance and activity reduction effect of Co-free valves in PWR environment
CB Bahn et al.
NUCLEAR ENGINEERING AND DESIGN (2004)
A novel procedure for fabrication of wear-resistant bushes for high-temperature application
CR Das et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Study on the cavitation erosion behavior of hardfacing alloys for nuclear power industry
MW Lee et al.
WEAR (2003)
Cladding of Ni-Cr-B-Si coatings with a high power diode laser
A Conde et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
The fracture toughness and toughening mechanisms of nickel-base wear materials
BV Cockeram
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Enhancement of cavitation erosion and corrosion resistance of brass by laser surface alloying with Ni-Cr-Si-B
KF Tam et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Comparison of laser-clad and furnace-melted Ni-based alloy microstructures
Q Li et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Effects of temperature and contact stress on the sliding wear of Ni-base Deloro 50 hardfacing alloy
SJ Kim et al.
JOURNAL OF NUCLEAR MATERIALS (2001)