相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Synthesis and characterization of high purity Mo2Ti2AlC3 ceramic
Shuai Fu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Synthesis, properties and thermal decomposition of the Ta4AlC3 MAX phase
Matteo Griseri et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Slip casting and pressureless sintering of Ti3AlC2
Yimin Gong et al.
JOURNAL OF ADVANCED CERAMICS (2019)
Synthesis of MAX Phases in the Zr-Ti-Al-C System
Bensu Tunca et al.
INORGANIC CHEMISTRY (2017)
Highly textured Ti2AlN ceramic prepared via thermal explosion followed by edge-free spark plasma sintering
Yi Liu et al.
SCRIPTA MATERIALIA (2017)
Thermally induced substitutional reaction of Fe into Mo2GaC thin films
Chung-Chuan Lai et al.
MATERIALS RESEARCH LETTERS (2017)
Phonon spectrum, IR and Raman modes, thermal expansion tensor and thermal physical properties of M2TiAlC2 (M = Cr, Mo, W)
Y. F. Li et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Breakaway oxidation of Ti3AlC2 during long-term exposure in air at 1100 °C
Xichao Li et al.
CORROSION SCIENCE (2016)
Synthesis of the novel Zr3AlC2 MAX phase
T. Lapauw et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Synthesis of the new MAX phase Zr2AlC
T. Lapauw et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Rapid synthesis and elastic properties of fine-grained Ti2SnC produced by spark plasma sintering
T. Lapauw et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Experimental and theoretical characterization of ordered MAX phases Mo2TiAlC2 and Mo2Ti2AlC3
Babak Anasori et al.
JOURNAL OF APPLIED PHYSICS (2015)
Synthesis of high-purity, isotropic or textured Cr2AlC bulk ceramics by spark plasma sintering of pressure-less sintered powders
Xiaoming Duan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)
Rapid synthesis of Ti2AlN ceramic via thermal explosion
Yi Liu et al.
MATERIALS LETTERS (2015)
Mo2TiAlC2: A new ordered layered ternary carbide
Babak Anasori et al.
SCRIPTA MATERIALIA (2015)
Synthesis of High-Purity Ti3SiC2 by Microwave Sintering
Qian Wang et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2014)
First principle calculations of MAX ceramics Cr2GeC, V2GeC and their substitutional solid solutions
H. I. Faraoun et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Combustion synthesis of Ti2SC
Xin Li et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2013)
Synthesis and ab initio calculations of nanolaminated (Cr,Mn)2AlC compounds
Aurelija Mockute et al.
PHYSICAL REVIEW B (2013)
A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in Air
Darin J. Tallman et al.
MATERIALS RESEARCH LETTERS (2013)
Optimization of the Ti3SiC2 MAX phase synthesis
M. A. El Saeed et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)
Material properties and machining performance of hybrid Ti2AlN bulk material for micro electrical discharge machining
Eui-Seong Choi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Cyclic oxidation of Ti3AlC2 at 1000-1300 degrees C in air
X. K. Qian et al.
CORROSION SCIENCE (2011)
Synthesis and characterization of Zr2SC ceramics
Mark Opeka et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Synthesis, Microstructure, and Mechanical Properties of Ti3Sn(1-x)AlxC2 MAX Phase Solid Solutions
Sylvain Dubois et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2010)
Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review
X. H. Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)
(Ti0.5Nb0.5)5AlC4: A New-Layered Compound Belonging to MAX Phases
Liya Zheng et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2010)
Reaction synthesis of layered ternary Ti2AlC ceramic
V. Gauthier-Brunet et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Material removal and surface damage in EDM of Ti3SiC2 ceramic
C. F. Hu et al.
CERAMICS INTERNATIONAL (2008)
Synthesis and elastic and mechanical properties of Cr2GeC
Shahram Amini et al.
JOURNAL OF MATERIALS RESEARCH (2008)
In Situ Reaction Synthesis and Mechanical Properties of V2AlC
Chunfeng Hu et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
New MAX-Phase compounds in the v-cr-al-c system
Yanchun Zhou et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Microstructure and properties of bulk Ta2AlC ceramic synthesized by an in situ reaction/hot pressing method
Chunfeng Hu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2008)
Synthesis and microstructure of layered-ternary Ti2AlC ceramic by high energy milling and hot pressing
Jianfeng Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Synthesis of high-purity Ti2A1N ceramic by hot pressing
Yan Ming et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2008)
Physical and mechanical properties of bulk Ta4AIC3 ceramic prepared by an in situ reaction Synthesis/Hot-Pressing method
Chunfeng Hu et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2007)
The correlation between the electronic structure and elastic properties of nanolaminates
Denis Music et al.
JOM (2007)
Synthesis and reaction mechanism of Ti3SiC2 by mechanical alloying of elemental Ti, Si, and C powders
SB Li et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2005)
In-situ hot pressing/solid-liquid reaction synthesis of bulk Cr2AlC
ZJ Lin et al.
ZEITSCHRIFT FUR METALLKUNDE (2005)
Dependence of elastic stiffness on electronic band structure of nanolaminate M2AlC (M=Ti,V,Nb, and Cr) ceramics -: art. no. 214111
JY Wang et al.
PHYSICAL REVIEW B (2004)
Oxidation behavior of Ti3AlC2 at 1000-1400°C in air
XH Wang et al.
CORROSION SCIENCE (2003)
Spark plasma sintering as advanced PM sintering method
V Mamedov
POWDER METALLURGY (2002)
Preparation and characterization of highly oriented NiO(200) films by a pulse ultrasonic spray pyrolysis method
SY Wang et al.
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2002)
Electrical conductivity, thermopower, and hall effect of Ti3AIC2, Ti4AIN3, and Ti3SiC2
MW Barsoum et al.
PHYSICAL REVIEW B (2000)
Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)
M Omori
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Structure of Ti4AlN3 -: a layered Mn+1AXn nitride
CJ Rawn et al.
MATERIALS RESEARCH BULLETIN (2000)
Thermal properties of Ti4AlN3
MW Barsoum et al.
JOURNAL OF APPLIED PHYSICS (2000)