相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Properties investigation of 3D printed continuous pineapple leaf fiber-reinforced PLA composite
Jaya Suteja et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)
Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling
Anouar El Magri et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
Investigate the effects of process parameters on material properties and microstructural changes of 3D-printed specimens using fused deposition modelling (FDM)
N. Naveed
MATERIALS TECHNOLOGY (2021)
Additive manufacturing of CNTs/PLA composites and the correlation between microstructure and functional properties
Xing Zhou et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Effect of eggshell and intumescent flame retardant on the thermal and mechanical properties of plasticised PLA
Gizem Urtekin et al.
PLASTICS RUBBER AND COMPOSITES (2021)
A comparative study for the behavior of 3D-printed and compression molded PLA/POSS nanocomposites
Yelda Meyva-Zeybek et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Laser polishing of Cu/PLA composite parts fabricated by fused deposition modeling: Analysis of surface finish and mechanical properties
Lan Chen et al.
POLYMER COMPOSITES (2020)
3D printing biocompatible l-Arg/GNPs/PLA nanocomposites with enhanced mechanical property and thermal stability
Yanen Wang et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Crystallization kinetics and morphology of small concentrations of cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs) melt-compounded into poly(lactic acid) (PLA) with plasticizer
Caitlyn M. Clarkson et al.
POLYMER (2020)
Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses
Tianyun Yao et al.
COMPOSITES PART B-ENGINEERING (2020)
Lignocellulosic fillers and graphene nanoplatelets as hybrid reinforcement for polylactic acid: Effect on mechanical properties and degradability
Roberto Scaffaro et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Morpho-Structural, Thermal and Mechanical Properties of PLA/PHB/Cellulose Biodegradable Nanocomposites Obtained by Compression Molding, Extrusion, and 3D Printing
Adriana Nicoleta Frone et al.
NANOMATERIALS (2020)
Effect of surface texturing on friction behaviour of 3D printed polylactic acid (PLA)
Ruttba Aziz et al.
POLYMER TESTING (2020)
Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine
Haiguang Zhang et al.
MATERIALS (2020)
Micrometer Copper-Zinc Alloy Particles-Reinforced Wood Plastic Composites with High Gloss and Antibacterial Properties for 3D Printing
Feiwen Yang et al.
POLYMERS (2020)
Effects of Magnesium Oxide (MgO) Shapes on In Vitro and In Vivo Degradation Behaviors of PLA/MgO Composites in Long Term
Yun Zhao et al.
POLYMERS (2020)
Essential Nanostructure Parameters to Govern Reinforcement and Functionality of Poly(lactic) Acid Nanocomposites with Graphene and Carbon Nanotubes for 3D Printing Application
Rumiana Kotsilkova et al.
POLYMERS (2020)
The Effect of Printing Parameters on Electrical Conductivity and Mechanical Properties of PLA and ABS Based Carbon Composites in Additive Manufacturing of Upper Limb Prosthetics
Attila Pentek et al.
CRYSTALS (2020)
Study of the matrix-filler interface in PLA/Mg composites manufactured by Material Extrusion using a colloidal feedstock
A. Ferrandez-Montero et al.
ADDITIVE MANUFACTURING (2020)
3D-Printed Wood-Fiber Reinforced Architected Cellular Composites
Ehsan Estakhrianhaghighi et al.
ADVANCED ENGINEERING MATERIALS (2020)
CNC dispersion in PLA and PBAT using two solvents: morphological and rheological properties
Mojtaba Mohammadi et al.
CELLULOSE (2020)
Preparation of antimicrobial 3D printing filament: In situ thermal formation of silver nanoparticles during the material extrusion
Daria Podstawczyk et al.
POLYMER COMPOSITES (2020)
Enhancing the mechanical properties of 3D printed polylactic acid using nanocellulose
Tushar Ambone et al.
POLYMER ENGINEERING AND SCIENCE (2020)
Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites
Hao Dou et al.
MATERIALS (2020)
Tailoring the mechanical properties of 3D-printed continuous flax/PLA biocomposites by controlling the slicing parameters
A. Le Duigou et al.
COMPOSITES PART B-ENGINEERING (2020)
Fused deposition modelling of PLA reinforced with cellulose nano-crystals
S. Dinesh Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2020)
3D Printing PLA Waste to Produce Ceramic Based Particulate Reinforced Composite Using Abundant Silica-Sand: Mechanical Properties Characterization
Waleed Ahmed et al.
POLYMERS (2020)
Manipulating phase structure of biodegradable PLA/PBAT system: Effects on dynamic rheological responses and 3D printing
Yang Lyu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Hybrid Manufacturing and Mechanical Characterization of Cu/PLA Composites
Javaid Butt et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)
Mechanical property prediction of SPS processed GNP/PLA polymer nanocomposite using artificial neural network
O. T. Adesina et al.
COGENT ENGINEERING (2020)
Magnesium Filled Polylactic Acid (PLA) Material for Filament Based 3D Printing
Iulian Antoniac et al.
MATERIALS (2019)
Optimizing 3D printing performance of acrylonitrile-butadiene-styrene composites with cellulose nanocrystals/silica nanohybrids
Bai Huang et al.
POLYMER INTERNATIONAL (2019)
PLA/Graphene/MWCNT Composites with Improved Electrical and Thermal Properties Suitable for FDM 3D Printing Applications
Evgeni Ivanov et al.
APPLIED SCIENCES-BASEL (2019)
Mechanical properties of PLA-graphene filament for FDM 3D printing
Jose C. Camargo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Statistical analysis of mechanical properties of wood-PLA composites prepared via additive manufacturing
K. Vigneshwaran et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2019)
Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM process
Leipeng Yang et al.
SYNTHETIC METALS (2019)
Nanocarbon/Poly(Lactic) Acid for 3D Printing: Effect of Fillers Content on Electromagnetic and Thermal Properties
Giovanni Spinelli et al.
MATERIALS (2019)
Fabrication, Crystalline Behavior, Mechanical Property and In-Vivo Degradation of Poly(L-lactide) (PLLA)-Magnesium Oxide Whiskers (MgO) Nano Composites Prepared by In-Situ Polymerizatione
Hui Liang et al.
POLYMERS (2019)
3D printed antibacterial silver nanowire/polylactide nanocomposites
Ipek Bayraktar et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of Porosity and Crystallinity on 3D Printed PLA Properties
Yuhan Liao et al.
POLYMERS (2019)
Modification the surface quality and mechanical properties by laser polishing of Al/PLA part manufactured by fused deposition modeling
Lan Chen et al.
APPLIED SURFACE SCIENCE (2019)
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
M. Heidari-Rarani et al.
COMPOSITES PART B-ENGINEERING (2019)
Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing
Amirmohammad Rahimizadeh et al.
COMPOSITES PART B-ENGINEERING (2019)
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
Xianglian Xiao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Microstructure and Mechanical Performance of 3D Printed Wood-PLA/PHA Using Fused Deposition Modelling: Effect of Printing Temperature
Sofiane Guessasma et al.
POLYMERS (2019)
3D printing of continuous flax fibre reinforced biocomposites for structural applications
A. Le Duigou et al.
MATERIALS & DESIGN (2019)
Nanoindentation analysis of 3D printed poly(lactic acid)-based composites reinforced with graphene and multiwall carbon nanotubes
Todor Batakliev et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing
Haibo Long et al.
POLYMER ENGINEERING AND SCIENCE (2019)
Fracture toughness of additively manufactured carbon fiber reinforced composites
Easir Arafat Papon et al.
ADDITIVE MANUFACTURING (2019)
Infill pattern and density effects on the tensile properties of 3D printed PLA material
M. Rismalia et al.
4TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE, 2019 (2019)
Magnesium Catalyzed Polymerization of End Functionalized Poly(propylene maleate) and Poly(propylene fumarate) for 3D Printing of Bioactive Scaffolds
James A. Wilson et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites
Huseini S. Patanwala et al.
POLYMER COMPOSITES (2018)
Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites
Jenniffer Bustillos et al.
POLYMER COMPOSITES (2018)
Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling
M. A. Caminero et al.
COMPOSITES PART B-ENGINEERING (2018)
PLA based biocomposites reinforced with Posidonia oceanica leaves
Roberto Scaffaro et al.
COMPOSITES PART B-ENGINEERING (2018)
Current research trends on plastic pollution and ecological impacts on the soil ecosystem: A review
Yooeun Chae et al.
ENVIRONMENTAL POLLUTION (2018)
Improved properties of PLA biocomposites toughened with bamboo cellulose nanowhiskers through silane modification
Shaoping Qian et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Interlayer diffusion of surface segregating additives to improve the isotropy of fused deposition modeling products
Neiko P. Levenhagen et al.
POLYMER (2018)
FDM process parameters influence over the mechanical properties of polymer specimens: A review
Diana Popescu et al.
POLYMER TESTING (2018)
Crystallization behaviors of poly(lactic acid) composites fabricated using functionalized eggshell powder and poly(ethylene glycol)
Yi Li et al.
THERMOCHIMICA ACTA (2018)
Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality
Gianluca Cicala et al.
MATERIALS (2018)
The Degradation Properties of MgO Whiskers/PLLA Composite In Vitro
Yun Zhao et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2018)
Determination of geometrical and viscoelastic properties of PLA/PHB samples made by additive manufacturing for urethral substitution
Alena Findrik Balogova et al.
JOURNAL OF BIOTECHNOLOGY (2018)
Influence of PLA Filament Conditions on Characteristics of FDM Parts
Ana Pilar Valerga et al.
MATERIALS (2018)
The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis
Adrian Rodriguez-Panes et al.
MATERIALS (2018)
Effect of process parameters on tensile strength of FDM printed PLA part
Shilpesh R. Rajpurohit et al.
RAPID PROTOTYPING JOURNAL (2018)
Morphological, Rheological and Electromagnetic Properties of Nanocarbon/Poly(lactic) Acid for 3D Printing: Solution Blending vs. Melt Mixing
Giovanni Spinelli et al.
MATERIALS (2018)
3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties
Bartolomeo Coppola et al.
MATERIALS (2018)
Release of Graphene and Carbon Nanotubes from Biodegradable Poly(Lactic Acid) Films during Degradation and Combustion: Risk Associated with the End-of-Life of Nanocomposite Food Packaging Materials
Stanislav Kotsilkov et al.
MATERIALS (2018)
Cellulose Nanowhiskers from Moso Bamboo Residues: Extraction and Characterization
Shaoping Qian et al.
BIORESOURCES (2017)
Microplastic pollution, a threat to marine ecosystem and human health: a short review
Shivika Sharma et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2017)
Release of carbon nanoparticles of different size and shape from nanocomposite poly(lactic) acid film into food simulants
Hristiana Velichkova et al.
FOOD ADDITIVES AND CONTAMINANTS PART A-CHEMISTRY ANALYSIS CONTROL EXPOSURE & RISK ASSESSMENT (2017)
Influence of polymer swelling and dissolution into food simulants on the release of graphene nanoplates and carbon nanotubes from poly(lactic) acid and polypropylene composite films
Hristiana Velichkova et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
JOURNAL OF CLEANER PRODUCTION (2017)
PDLLA honeycomb-like scaffolds with a high loading of superhydrophilic graphene/multi-walled carbon nanotubes promote osteoblast in vitro functions and guided in vivo bone regeneration
Edmundo Silva et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
Hydrolytic degradation of polylactic acid (PLA) and its composites
Moataz A. Elsawy et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure
Michael Arthur Cuiffo et al.
APPLIED SCIENCES-BASEL (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
Development of PLA/Mg composite for orthopedic implant: Tunable degradation and enhanced mineralization
Changli Zhao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
In vitro degradation kinetics of pure PLA and Mg/PLA composite: Effects of immersion temperature and compression stress
Xuan Li et al.
ACTA BIOMATERIALIA (2017)
In vitro degradation of biodegradable polylactic acid/magnesium composites: Relevance of Mg particle shape
S. C. Cifuentes et al.
ACTA BIOMATERIALIA (2016)
Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review
Shady Farah et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Effects of modifying agents on surface modifications of magnesium oxide whiskers
Yun Zhao et al.
APPLIED SURFACE SCIENCE (2016)
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling
Alice Melocchi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Plastic waste in the marine environment: A review of sources, occurrence and effects
W. C. Li et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2016)
Effects of MgO whiskers on mechanical properties and crystallization behavior of PLLA/MgO composites
Yun Zhao et al.
MATERIALS & DESIGN (2016)
The status, challenges, and future of additive manufacturing in engineering
Wei Gao et al.
COMPUTER-AIDED DESIGN (2015)