相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Microscopic mechanism exploration and constitutive equation construction for compression characteristics of AZ31-TD magnesium alloy at high strain rate
Feng Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Deformation mechanisms of zirconium alloys under biaxial tension at room temperature
Gang Chen et al.
MATERIALS LETTERS (2020)
Crack growth behaviour in biaxial stress fields: Calculation of K-factors for cruciform specimens
Carl H. Wolf et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Size effect on the yield behavior of metal foil under multiaxial stress states: Experimental investigation and modelling
C. Cheng et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Finite Element Model Updating Combined with Multi-Response Optimization for Hyper-Elastic Materials Characterization
Saul Iniguez-Macedo et al.
MATERIALS (2019)
Optimal Design of a Miniaturized Cruciform Specimen for Biaxial Testing of TA2 Alloys
Zhikang Zhu et al.
METALS (2019)
A modified constitutive model for tensile deformation of 9%Cr steel under prior fatigue loading
Wei Zhang et al.
MECHANICS OF MATERIALS (2019)
The difference in low cycle fatigue behavior of CP-Ti under fully reversed strain and stress controlled modes along rolling direction
Le Chang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
On the identification of an effective cross section for a cruciform specimen
M. Haertel et al.
STRAIN (2018)
Effect of Stress State on Fracture Features
Arpan Das
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Using Genetic Algorithms with Multi-Objective Optimization to Adjust Finite Element Models of Welded Joints
Ruben Lostado Lorza et al.
METALS (2018)
Forming limit in thermal cruciform biaxial tensile testing of titanium alloy
Rui Xiao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts
J. Z. Lu et al.
ACTA MATERIALIA (2017)
Effect of Microstructure Variation on Differential Hardening Behavior of Steel Sheets under Biaxial Tensile State
Masahiro Kubo et al.
ISIJ INTERNATIONAL (2016)
Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants - Is one truly better than the other?
Furqan A. Shah et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Identification of strain rate-dependent mechanical behaviour of DP600 under in-plane biaxial loadings
Wei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Deformation behavior of commercially pure (CP) titanium under equi-biaxial tension
Nedunchezhian Srinivasan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Biaxial tensile testing of cruciform slim superalloy at elevated temperatures
Rui Xiao et al.
MATERIALS & DESIGN (2016)
Mechanical properties of Precontraint 1202S coated fabric under biaxial tensile test with different load ratios
Andrzej Ambroziak
CONSTRUCTION AND BUILDING MATERIALS (2015)
Deformation and strain hardening behavior of powder metallurgical TRIP steel under quasi-static biaxial-planar loading
D. Kulawinski et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The tensile and tensile-creep deformation behavior of Ti-8Al-1Mo-1V(wt%)
I. G. Dastidar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Mechanisms of anisotropy of mechanical properties of α-titanium in tension conditions
A. Roth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Failure analysis based on microvoid growth for sheet metal during uniaxial and biaxial tensile tests
Fethi Abbassi et al.
MATERIALS & DESIGN (2013)
An improved constitutive description of tensile behavior for CP-Ti at ambient and intermediate temperatures
Jian Peng et al.
MATERIALS & DESIGN (2013)
In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium
Frederic Mompiou et al.
ACTA MATERIALIA (2012)
Nucleation and Growth Behavior of Twin Region Around Yield Point of Polycrystalline Pure Ti
G. Murasawa et al.
EXPERIMENTAL MECHANICS (2012)
Material modeling of 6000 series aluminum alloy sheets with different density cube textures and effect on the accuracy of finite element simulation
Daisaku Yanaga et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)
Experimental and finite-element analysis of the anisotropic response of high-purity α-titanium in bending
Michael E. Nixon et al.
ACTA MATERIALIA (2010)
Fracture surfaces and the associated failure mechanisms in ductile iron with different matrices and load bearing
Ricardo A. Martinez
ENGINEERING FRACTURE MECHANICS (2010)
A comparative study on Johnson Cook, modified Zerilli-Armstrong and Arrhenius-type constitutive models to predict elevated temperature flow behaviour in modified 9Cr-1Mo steel
Dipti Samantaray et al.
COMPUTATIONAL MATERIALS SCIENCE (2009)
Constitutive equations for pure titanium at elevated temperatures
Zhipeng Zeng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Uniaxial tensile plastic deformation and grain growth of bulk nanocrystalline alloys
G. J. Fan et al.
ACTA MATERIALIA (2006)
The effects of temperature and strain rate on the dynamic flow behaviour of different steels
Woei-Shyan Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Fatigue life prediction of type 304 stainless steel under sequential biaxial loading
X Chen et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Thermo-mechanical response of nylon 101 under uniaxial and multi-axial loadings: Part I, Experimental results over wide ranges of temperatures and strain rates
Akhtar S. Khan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2006)
Change of Young's modulus of cold-deformed pure iron in a tensile test
JA Benito et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Use of abrupt strain path change for determining subsequent yield surface: Experimental study with metal sheets
T Kuwabara et al.
ACTA MATERIALIA (2000)
分享论文
