相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。3D printing materials for generators of active particles based on electrical discharges
Jan Mikes et al.
PLASMA PROCESSES AND POLYMERS (2020)
Photodegradation of Decabromo Diphenyl Ether Flame Retardant in Poly (Acrylonitrile Butadiene Styrene) (ABS)
Hussam Aldoori et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2020)
The Analysis of 3D Printer Dust for Forensic Applications,,
Kelly Brinsko-Beckert et al.
JOURNAL OF FORENSIC SCIENCES (2020)
Selection of functional materials for surface-coating of structural synthetic fibres and development of a 3D-printing system for their manufacture
Ah-Hyeon Eom et al.
COMPOSITE STRUCTURES (2020)
Preparation of Hydrophobic Surface on PLA and ABS by Fused Deposition Modeling
Huadong Yang et al.
POLYMERS (2020)
Surface Activation of Polylactic Acid-Based Wood-Plastic Composite by Atmospheric Pressure Plasma Treatment
Philipp Sauerbier et al.
MATERIALS (2020)
Structural performance of 3D-printed composites under various loads and environmental conditions
Mohammad Reza Khosravani et al.
POLYMER TESTING (2020)
3D-poly (lactic acid) scaffolds coated with gelatin and mucic acid for bone tissue engineering
B. Ashwin et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
State of art review on Life Cycle Assessment of polymers
P. Ramesh et al.
INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2020)
Fabrication of a superhydrophobic surface using a fused deposition modeling (FDM) 3D printer with poly lactic acid (PLA) filament and dip coating with silica nanoparticles
Kyong-Min Lee et al.
APPLIED SURFACE SCIENCE (2019)
Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materials
Nadir Ayrilmis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Production of 3D printed polylactide scaffolds with surface grafted hydrogel coatings
Piotr Kowalczyk et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2019)
FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
Valentina Mazzanti et al.
POLYMERS (2019)
Effect of wood flour content on surface properties of 3D printed materials produced from wood flour/PLA filament
Nadir Ayrilmis et al.
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2019)
Modeling of surface roughness based on heat transfer considering diffusion among deposition filaments for FDM 3D printing heat-resistant resin
Peng Wang et al.
APPLIED THERMAL ENGINEERING (2019)
Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures
Rupinder Singh et al.
POLYMERS (2019)
Innovative Wood Surface Treatments Based on Nanotechnology
Antonios N. Papadopoulos et al.
COATINGS (2019)
An Overview on 3D Printing Technology: Technological, Materials, and Applications
N. Shahrubudin et al.
2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2019) (2019)
Improving adhesion of three-dimensional printed objects on textile fabrics by polymer coating
Pia Meyer et al.
JOURNAL OF ENGINEERED FIBERS AND FABRICS (2019)
One-step preparation of superhydrophobic acrylonitrile-butadiene-styrene copolymer coating for ultrafast separation of water-in-oil emulsions
Wanshun Deng et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)
Effect of surface modification by acetone vaporization on the structure of 3D printed acrylonitrile-butadiene-styrene elements
Dawid Marciniak et al.
POLIMERY (2018)
Increasing Adhesion of 3D Printing on Textile Fabrics by Polymer Coating
Lena Unger et al.
TEKSTILEC (2018)
Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters
Razieh Hashemi Sanatgar et al.
APPLIED SURFACE SCIENCE (2017)
Critical materials and processing challenges affecting the interface and functional performance of wood polymer composites (WPCs)
Eyitayo Olatunde Olakanmi et al.
MATERIALS CHEMISTRY AND PHYSICS (2016)
Modification of interfacial adhesion with a functionalized polymer in PLA/wood composites
Aron Csikos et al.
EUROPEAN POLYMER JOURNAL (2015)
Water-based coatings for 3D printed parts
Jiayi Zhu et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2015)
Synchrotron-based FTIR microspectroscopy for the mapping of photo-oxidation and additives in acrylonitrile-butadiene-styrene model samples and historical objects
Daniela Saviello et al.
ANALYTICA CHIMICA ACTA (2014)
Wettability of conducting polymers: From superhydrophilicity to superoleophobicity
Thierry Darmanin et al.
PROGRESS IN POLYMER SCIENCE (2014)
ATR-FTIR spectroscopy and quantitative multivariate analysis of paints and coating materials
Philippa Alice Hayes et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2014)
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Angel R. Torrado Perez et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2014)
Improving interfacial adhesion in pla/wood biocomposites
G. Faludi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Roles and evidence of wood flour as an antibacterial promoter for triclosan-filled poly(lactic acid)
C. Prapruddivongs et al.
COMPOSITES PART B-ENGINEERING (2012)
Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
J. P. Mofokeng et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)
Performance of oil palm empty fruit bunch fibres coated with acrylonitrile butadiene styrene
Farshid Bateni et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Studies on Performance of Cured Water-Borne Melamine-Acrylic Emulsion Coatings
Renlu Han et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2011)
Wood-plastic composites formulated with virgin and recycled ABS
Shu-Kai Yeh et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
FTIR, 1H-NMR spectra, and thermal characterization of water-based Polyurethane/Acrylic hybrids
O. R. Pardini et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
Composites of acrylonitrile-butadiene-styrene filled with wood-flour
L. M. Matuana et al.
POLYMERS & POLYMER COMPOSITES (2007)
Wood-fiber-reinforced poly(lactic acid) composites: Evaluation of the physicomechanical and morphological properties
M. S. Huda et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Chelating ligands as powerful additives to manganese driers for solvent-borne and water-borne alkyd paints
JZ Wu et al.
PROGRESS IN ORGANIC COATINGS (2004)
Natural fibres as reinforcement in polylactic acid (PLA) composites
K Oksman et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Oxide-catalyzed conversion of acetic acid into acetone: an FTIR spectroscopic investigation
MA Hasan et al.
APPLIED CATALYSIS A-GENERAL (2003)
Improved surface finish in 3D printing using bimodal powder distribution
M Lanzetta et al.
RAPID PROTOTYPING JOURNAL (2003)
A literature review of poly(lactic acid)
D Garlotta
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2001)
Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation
JF Rodriguez et al.
RAPID PROTOTYPING JOURNAL (2001)