相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Non-Fullerene Organic Solar Cells Based on Benzo[1,2-b:4,5-b′]difuran-Conjugated Polymer with 14% Efficiency
Xueshan Li et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Oxygen-dependent photophysics and photochemistry of prototypical compounds for organic photovoltaics: inhibiting degradation initiated by singlet oxygen at a molecular level
Mikkel Bregnhoj et al.
METHODS AND APPLICATIONS IN FLUORESCENCE (2020)
Interface-enhanced organic solar cells with extrapolated T80 lifetimes of over 20 years
Xiang Xu et al.
SCIENCE BULLETIN (2020)
Delayed Fluorescence Emitter Enables Near 17% Efficiency Ternary Organic Solar Cells with Enhanced Storage Stability and Reduced Recombination Energy Loss
Xiaoyang Du et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Highly Efficient and Stable GABr-Modified Ideal-Bandgap (1.35 eV) Sn/Pb Perovskite Solar Cells Achieve 20.63% Efficiency with a Record Small Voc Deficit of 0.33 V
Xianyong Zhou et al.
ADVANCED MATERIALS (2020)
Unraveling the Microstructure-Related Device Stability for Polymer Solar Cells Based on Nonfullerene Small-Molecular Acceptors
Xiaoyan Du et al.
ADVANCED MATERIALS (2020)
PBDB-T and its derivatives: A family of polymer donors enables over 17% efficiency in organic photovoltaics
Zhong Zheng et al.
MATERIALS TODAY (2020)
An insight into the air stability of the benchmark polymer:fullerene photovoltaic films and devices: A comparative study
Saqib Rafique et al.
ORGANIC ELECTRONICS (2020)
Altering alkyl-chains branching positions for boosting the performance of small-molecule acceptors for highly efficient nonfullerene organic solar cells
Zhenghui Luo et al.
SCIENCE CHINA-CHEMISTRY (2020)
Organic tandem solar cells with 18.6% efficiency
Muath Bani Salim et al.
SOLAR ENERGY (2020)
The influence of UV filter and Al/Ag moisture barrier layer on the outdoor stability of polymer solar cells
Chia-Ning Weng et al.
SOLAR ENERGY (2020)
Integrated Perovskite/Bulk-Heterojunction Organic Solar Cells
Yongsheng Liu et al.
ADVANCED MATERIALS (2020)
U1 snRNP regulates cancer cell migration and invasion in vitro
Jung-Min Oh et al.
NATURE COMMUNICATIONS (2020)
Efficient Non-Fullerene Organic Photovoltaics Printed by Electrospray via Solvent Engineering
Kai Chang et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Soft Porous Blade Printing of Nonfullerene Organic Solar Cells
Mingyao Zhong et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2020)
Triplet Acceptors with a D-A Structure and Twisted Conformation for Efficient Organic Solar Cells
Linqing Qin et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
Organic photovoltaic cell with 17% efficiency and superior processability
Yong Cui et al.
NATIONAL SCIENCE REVIEW (2020)
18% Efficiency organic solar cells
Qishi Liu et al.
SCIENCE BULLETIN (2020)
Phenolic antioxidant-incorporated durable perovskite layers and their application for a solar cell
Koki Suwa et al.
MRS COMMUNICATIONS (2020)
Progress in Stability of Organic Solar Cells
Duan Leiping et al.
ADVANCED SCIENCE (2020)
Exploiting Ternary Blends for Improved Photostability in High-Efficiency Organic Solar Cells
Nicola Gasparini et al.
ACS ENERGY LETTERS (2020)
Recent Progress on Indoor Organic Photovoltaics: From Molecular Design to Production Scale
Mathieu Mainville et al.
ACS ENERGY LETTERS (2020)
A Universal Method to Enhance Flexibility and Stability of Organic Solar Cells by Constructing Insulating Matrices in Active Layers
Jianhua Han et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Degradation Behavior of Scalable Nonfullerene Organic Solar Cells Assessed by Outdoor and Indoor ISOS Stability Protocols
William Greenbank et al.
ENERGY TECHNOLOGY (2020)
Relationship between Fill Factor and Light Intensity in Solar Cells Based on Organic Disordered Semiconductors: The Role of Tail States
Biao Xiao et al.
PHYSICAL REVIEW APPLIED (2020)
Enhanced performance of P3HT-based non-fullerene polymer solar cells by optimizing film morphology using non -halogenated solvent
Kang An et al.
ORGANIC ELECTRONICS (2020)
Developing low boiling point solvent additives directly based on non-fullerene based active layer: Higher efficiency and better thickness tolerance
Zelong Hu et al.
ORGANIC ELECTRONICS (2020)
Highly efficient, green-solvent processable, and stable non-fullerene polymer solar cells enabled by a random polymer donor
Zhiming Chen et al.
ORGANIC ELECTRONICS (2020)
Two similar near-infrared (IR) non-fullerene acceptors as near IR sensitizers for ternary solar cells
Mumin Shi et al.
ORGANIC ELECTRONICS (2020)
Material Strategies to Accelerate OPV Technology Toward a GW Technology
Christoph J. Brabec et al.
ADVANCED ENERGY MATERIALS (2020)
Designing Star-Shaped Subphthalocyanine-Based Acceptor Materials with Promising Photovoltaic Parameters for Non-fullerene Solar Cells
Muhammad Usman Khan et al.
ACS OMEGA (2020)
Application of a natural antioxidant as an efficient strategy to decrease the oxidation in Sn-based perovskites
Hamideh Mohammadian-Sarcheshmeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Recent advances in non-fullerene organic solar cells: from lab to fab
Lijiao Ma et al.
CHEMICAL COMMUNICATIONS (2020)
Efficient and stable operation of nonfullerene organic solar cells: retaining a high built-in potential
Yiwen Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
The damaging effects of the acidity in PEDOT:PSS on semiconductor device performance and solutions based on non-acidic alternatives
Joseph Cameron et al.
MATERIALS HORIZONS (2020)
High-Performance and Stable Nonfullerene Acceptor-Based Organic Solar Cells for Indoor to Outdoor Light
Sungmin Park et al.
ACS ENERGY LETTERS (2020)
Efficient and Mechanically Robust Ultraflexible Organic Solar Cells Based on Mixed Acceptors
Wenchao Huang et al.
JOULE (2020)
Incorporation of Hydrogen Molybdenum Bronze in Solution-Processed Interconnecting Layer for Efficient Nonfullerene Tandem Organic Solar Cells
Wenwu Zeng et al.
SOLAR RRL (2020)
Stabilization of Inorganic CsPb0.5Sn0.5I2Br Perovskite Compounds by Antioxidant Tea Polyphenol
Huaxia Ban et al.
SOLAR RRL (2020)
Novel wide-bandgap non-fullerene acceptors for efficient tandem organic solar cells
Yuliar Firdaus et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Flexible OPV modules for highly efficient indoor applications
Mari Ylikunnari et al.
FLEXIBLE AND PRINTED ELECTRONICS (2020)
Polymer Donors for High-Performance Non-Fullerene Organic Solar Cells
Huiting Fu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Hybridization of Local Exciton and Charge-Transfer States Reduces Nonradiative Voltage Losses in Organic Solar Cells
Flurin D. Eisner et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics
Jun Yuan et al.
NATURE COMMUNICATIONS (2019)
Significant Effect of Fluorination on Simultaneously Improving Work Function and Transparency of Anode Interlayer for Organic Solar Cells
Lili Lu et al.
ADVANCED ENERGY MATERIALS (2019)
Twist and Degrade-Impact of Molecular Structure on the Photostability of Nonfullerene Acceptors and Their Photovoltaic Blends
Joel Luke et al.
ADVANCED ENERGY MATERIALS (2019)
15% Efficiency Tandem Organic Solar Cell Based on a Novel Highly Efficient Wide-Bandgap Nonfullerene Acceptor with Low Energy Loss
Gongchu Liu et al.
ADVANCED ENERGY MATERIALS (2019)
Stability of Nonfullerene Organic Solar Cells: from Built-in Potential and Interfacial Passivation Perspectives
Yiwen Wang et al.
ADVANCED ENERGY MATERIALS (2019)
Encapsulation of Organic and Perovskite Solar Cells: A Review
Ashraf Uddin et al.
COATINGS (2019)
Toward Improved Environmental Stability of Polymer:Fullerene and Polymer:Nonfullerene Organic Solar Cells: A Common Energetic Origin of Light- and Oxygen-Induced Degradation
Emily M. Speller et al.
ACS ENERGY LETTERS (2019)
Effect of Ultraviolet Radiation on Organic Photovoltaic Materials and Devices
Jay B. Patel et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Evidence for Strong and Weak Phenyl-C61-Butyric Acid Methyl Ester Photodimer Populations in Organic Solar Cells
Sebastian Pont et al.
CHEMISTRY OF MATERIALS (2019)
Progress in non-fullerene acceptor based organic solar cells
Leiping Duan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)
Rational Strategy to Stabilize an Unstable High-Efficiency Binary Nonfullerene Organic Solar Cells with a Third Component
Youqin Zhu et al.
ADVANCED ENERGY MATERIALS (2019)
Improving the efficiency and stability of non-fullerene polymer solar cells by using N2200 as the Additive
Nannan Zheng et al.
NANO ENERGY (2019)
Digital Inkjet Printing of High-Efficiency Large-Area Nonfullerene Organic Solar Cells
Daniel Corzo et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Diffusion-Limited Crystallization: A Rationale for the Thermal Stability of Non-Fullerene Solar Cells
Liyang Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Solution-Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance
Viktor V. Brus et al.
ADVANCED MATERIALS (2019)
Star-Shaped Non-Fullerene Small Acceptors for Organic Solar Cells
Yi-Qi Pan et al.
CHEMSUSCHEM (2019)
Energy level modulation of ITIC derivatives: Effects on the photodegradation of conventional and inverted organic solar cells
Nutifafa Y. Doumon et al.
ORGANIC ELECTRONICS (2019)
Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages
Yong Cui et al.
NATURE COMMUNICATIONS (2019)
Slot-die printed non-fullerene organic solar cells with the highest efficiency of 12.9% for low-cost PV-driven water splitting
Qiang Wu et al.
NANO ENERGY (2019)
Impact of Nonfullerene Acceptor Side Chain Variation on Transistor Mobility
Helen Bristow et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Enhanced Electron Transport and Heat Transfer Boost Light Stability of Ternary Organic Photovoltaic Cells Incorporating Non-Fullerene Small Molecule and Polymer Acceptors
Hang Yin et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Interfaces in organic electronics
Mats Fahlman et al.
NATURE REVIEWS MATERIALS (2019)
1 cm2 Organic Photovoltaic Cells for Indoor Application with over 20% Efficiency
Yong Cui et al.
ADVANCED MATERIALS (2019)
17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS
Yuanbao Lin et al.
ADVANCED MATERIALS (2019)
Evaporation-Free Nonfullerene Flexible Organic Solar Cell Modules Manufactured by An All-Solution Process
Yong Woon Han et al.
ADVANCED ENERGY MATERIALS (2019)
Revealing Hidden UV Instabilities in Organic Solar Cells by Correlating Device and Material Stability
Andrej Classen et al.
ADVANCED ENERGY MATERIALS (2019)
High Short-Circuit Current Density via Integrating the Perovskite and Ternary Organic Bulk Heterojunction
Wei Chen et al.
ACS ENERGY LETTERS (2019)
Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications
Yong Cui et al.
NATURE ENERGY (2019)
Biomimetic Approach to Inhibition of Photooxidation in Organic Solar Cells Using Beta-Carotene as an Additive
Vida Turkovic et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Effect of Solvent Additives on the Morphology and Device Performance of Printed Nonfullerene Acceptor Based Organic Solar Cells
Kerstin S. Wienhold et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Indoor Photovoltaics: Photoactive Material Selection, Greener Ink Formulations, and Slot-Die Coated Active Layers
Sergey V. Dayneko et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Disorder vs Delocalization: Which Is More Advantageous for High-Efficiency Organic Solar Cells?
Stavros Athanasopoulos et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)
Tail state limited photocurrent collection of thick photoactive layers in organic solar cells
Jiaying Wu et al.
NATURE COMMUNICATIONS (2019)
Retarding the Crystallization of a Nonfullerene Electron Acceptor for High-Performance Polymer Solar Cells
Wei Li et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance
Huiting Fu et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Large-Area Organic Solar Cells: Material Requirements, Modular Designs, and Printing Methods
Guodong Wang et al.
ADVANCED MATERIALS (2019)
12.5% Flexible Nonfullerene Solar Cells by Passivating the Chemical Interaction Between the Active Layer and Polymer Interfacial Layer
Sixing Xiong et al.
ADVANCED MATERIALS (2019)
Photostability of Fullerene and Non-Fullerene Polymer Solar Cells: The Role of the Acceptor
Nutifafa Y. Doumon et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Suppressing photo-oxidation of non-fullerene acceptors and their blends in organic solar cells by exploring material design and employing friendly stabilizers
Jing Guo et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
An Operando Study on the Photostability of Nonfullerene Organic Solar Cells
Jingyang Xiao et al.
SOLAR RRL (2019)
Highly efficient near-infrared and semitransparent polymer solar cells based on an ultra-narrow bandgap nonfullerene acceptor
Juan Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Synthesis of Sulfur/Nitrogen-Enriched Polyimide and Interlayer Application for Inverted Polymer:Nonfullerene Solar Cells
Dohan Kim et al.
SOLAR RRL (2019)
Comparative analysis of burn-in photo-degradation in non-fullerene COi8DFIC acceptor based high-efficiency ternary organic solar cells
Leiping Duan et al.
MATERIALS CHEMISTRY FRONTIERS (2019)
A versatile star-shaped organic semiconductor based on benzodithiophene and diketopyrrolopyrrole
Qiao He et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Efficient Polymer Solar Cells Based on Non-fullerene Acceptors with Potential Device Lifetime Approaching 10 Years
Xiaoyan Du et al.
JOULE (2019)
A Printable Organic Cathode Interlayer Enables over 13% Efficiency for 1-cm2 Organic Solar Cells
Qian Kang et al.
JOULE (2019)
A multi-objective optimization-based layer-by-layer blade-coating approach for organic solar cells: rational control of vertical stratification for high performance
Rui Sun et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
Delineation of Thermodynamic and Kinetic Factors that Control Stability in Non-fullerene Organic Solar Cells
Masoud Ghasemi et al.
JOULE (2019)
Visible light to switch-on desorption from goethite
Anna Sutka et al.
NANOSCALE (2019)
Ring-perfluorinated non-volatile additives with a high dielectric constant lead to highly efficient and stable organic solar cells
Jiyeon Oh et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Improved photostability in ternary blend organic solar cells: the role of [70]PCBM
Nutifafa Y. Doumon et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Enhancing thermal stability of nonfullerene organic solar cells via fluoro-side-chain engineering
Yue Xin et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core
Jun Yuan et al.
JOULE (2019)
Lithium Doping of ZnO for High Efficiency and Stability Fullerene and Non-fullerene Organic Solar Cells
Anastasia Soultati et al.
ACS APPLIED ENERGY MATERIALS (2019)
Alkyl Chain Tuning of Small Molecule Acceptors for Efficient Organic Solar Cells
Kui Jiang et al.
JOULE (2019)
All-polymer indoor photovoltaics with high open-circuit voltage
Zicheng Ding et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Intrinsic photo-degradation and mechanism of polymer solar cells: the crucial role of non-fullerene acceptors
Sungmin Park et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Intracellular low-abundance microRNA imaging by a NIR-assisted entropy-driven DNA system
Huiting Lu et al.
NANOSCALE HORIZONS (2019)
Suppressing the excessive aggregation of nonfullerene acceptor in blade-coated active layer by using n-type polymer additive to achieve large-area printed organic solar cells with efficiency over 15%
Sheng Dong et al.
ECOMAT (2019)
Photocatalytic effect of ZnO on the stability of nonfullerene acceptors and its mitigation by SnO2 for nonfullerene organic solar cells
Youyu Jiang et al.
MATERIALS HORIZONS (2019)
Perylene Diimide-Based Zwitterion as the Cathode Interlayer for High-Performance Nonfullerene Polymer Solar Cells
Changjian Song et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
High-Efficiency and Stable Organic Solar Cells Enabled by Dual Cathode Buffer Layers
Zhaoxiang Huai et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
High-Performance Ternary Nonfullerene Polymer Solar Cells with Both Improved Photon Harvesting and Device Stability
Manjun Xiao et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Reinforcing the Built-In Field for Efficient Charge Collection in Polymer Solar Cells
Jong-Hoon Lee et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Conformation Locking on Fused-Ring Electron Acceptor for High-Performance Nonfullerene Organic Solar Cells
Zhuohan Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Chemical and Morphological Control of Interfacial Self-Doping for Efficient Organic Electronics
Yao Liu et al.
ADVANCED MATERIALS (2018)
Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11%
Yamin Zhang et al.
ADVANCED MATERIALS (2018)
Organic Photovoltaics over Three Decades
Olle Inganaes
ADVANCED MATERIALS (2018)
A High-Efficiency Organic Solar Cell Enabled by the Strong Intramolecular Electron Push-Pull Effect of the Nonfullerene Acceptor
Wanning Li et al.
ADVANCED MATERIALS (2018)
Fused Tris(thienothiophene)-Based Electron Acceptor with Strong Near-Infrared Absorption for High-Performance As-Cast Solar Cells
Tengfei Li et al.
ADVANCED MATERIALS (2018)
Surpassing 10% Efficiency Benchmark for Nonfullerene Organic Solar Cells by Scalable Coating in Air from Single Nonhalogenated Solvent
Long Ye et al.
ADVANCED MATERIALS (2018)
The Critical Role of Anode Work Function in Non-Fullerene Organic Solar Cells Unveiled by Counterion-Size-Controlled Self-Doping Conjugated Polymers
Yong Cui et al.
CHEMISTRY OF MATERIALS (2018)
The role of fullerenes in the environmental stability of polymer: fullerene solar cells
Harrison Ka Hin Lee et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Suppressing Thermally Induced Fullerene Aggregation in Organic Solar Cells by Employing Plastic Network
Xiaoyu Yang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Design rules for minimizing voltage losses in high-efficiency organic solar cells
Deping Qian et al.
NATURE MATERIALS (2018)
Solution processed transition metal oxide anode buffer layers for efficiency and stability enhancement of polymer solar cells
M. Yoosuf Ameen et al.
OPTICAL MATERIALS (2018)
Effect of annealing dependent blend morphology and dielectric properties on the performance and stability of non-fullerene organic solar cells
Mushfika Baishakhi Upama et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Printed Nonfullerene Organic Solar Cells with the Highest Efficiency of 9.5%
Yuanbao Lin et al.
ADVANCED ENERGY MATERIALS (2018)
Solution-Processable Conjugated Polymers as Anode Interfacial Layer Materials for Organic Solar Cells
Bowei Xu et al.
ADVANCED ENERGY MATERIALS (2018)
The Physics of Small Molecule Acceptors for Efficient and Stable Bulk Heterojunction Solar Cells
Nicola Gasparini et al.
ADVANCED ENERGY MATERIALS (2018)
Chemical reaction between an ITIC electron acceptor and an amine-containing interfacial layer in non-fullerene solar cells
Lin Hu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Highly efficient non-fullerene polymer solar cells enabled by novel non-conjugated small-molecule cathode interlayers
Ruixiang Peng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
High-efficiency and air stable fullerene-free ternary organic solar cells
Qiaoshi An et al.
NANO ENERGY (2018)
High-Efficiency Polymer:Nonfullerene Solar Cells with Quaterthiophene-Containing Polyimide Interlayers
Euyoung Park et al.
ADVANCED SCIENCE (2018)
Current Status of Outdoor Lifetime Testing of Organic Photovoltaics
Yiwei Zhang et al.
ADVANCED SCIENCE (2018)
Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors
Jianquan Zhang et al.
NATURE ENERGY (2018)
Non-fullerene acceptors for organic solar cells
Cenqi Yan et al.
NATURE REVIEWS MATERIALS (2018)
Efficient perovskite/organic integrated solar cells with extended photoresponse to 930 nm and enhanced near-infrared external quantum efficiency of over 50%
Qiang Guo et al.
NANOSCALE (2018)
Organic and solution-processed tandem solar cells with 17.3% efficiency
Lingxian Meng et al.
SCIENCE (2018)
A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss
Bin Kan et al.
SCIENCE CHINA-CHEMISTRY (2018)
Exceeding 14% Efficiency for Solution-Processed Tandem Organic Solar Cells Combining Fullerene- and Nonfullerene-Based Subcells with Complementary Absorption
Bing Guo et al.
ACS ENERGY LETTERS (2018)
Alcohol-Soluble Cross-Linked Poly(nBA)n-b-Poly(NVTri)m Block Copolymer and Its Applications in Organic Photovoltaic Cells for Improved Stability
Kai-Ting Huang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
High Efficiency Non-fullerene Organic Tandem Photovoltaics Based on Ternary Blend Subcells
Wenchao Huang et al.
NANO LETTERS (2018)
Design and application of volatilizable solid additives in non-fullerene organic solar cells
Runnan Yu et al.
NATURE COMMUNICATIONS (2018)
Self-doping small molecular conjugated electrolytes enabled by n-type side chains for highly efficient non-fullerene polymer solar cells
Shichao Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
High-performance ternary organic solar cells with photoresponses beyond 1000 nm
Peiyao Xue et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Facile Synthesis of an Efficient and Robust Cathode Interface Material for Polymer Solar Cells
Jonas Mattiasson Bjuggren et al.
ACS APPLIED ENERGY MATERIALS (2018)
Realizing Over 13% Efficiency in Green-Solvent-Processed Nonfullerene Organic Solar Cells Enabled by 1,3,4-Thiadiazole-Based Wide-Bandgap Copolymers
Xiaopeng Xu et al.
ADVANCED MATERIALS (2018)
Understanding Energy Loss in Organic Solar Cells: Toward a New Efficiency Regime
S. Matthew Menke et al.
JOULE (2018)
An All-Solution Processed Recombination Layer with Mild Post-Treatment Enabling Efficient Homo-Tandem Non-fullerene Organic Solar Cells
Shangshang Chen et al.
ADVANCED MATERIALS (2017)
Reducing the effciency-stability-cost gap of organic photovoltaics with highly effcient and stable small molecule acceptor ternary solar cells
Derya Baran et al.
NATURE MATERIALS (2017)
Carbon Dangling Bonds in Photodegraded Polymer: Fullerene Solar Cells
Fadzai Fungura et al.
ADVANCED ENERGY MATERIALS (2017)
Suppressing photooxidation of conjugated polymers and their blends with fullerenes through nickel chelates
Michael Salvador et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Interface design for high-efficiency non-fullerene polymer solar cells
Chen Sun et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Polymer Solar Cells Employing Water-Soluble Polypyrrole Nanoparticles as Dopants of PEDOT:PSS with Enhanced Efficiency and Stability
Xingye Zhang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
High Efficiency Near-Infrared and Semitransparent Non-Fullerene Acceptor Organic Photovoltaic Cells
Yongxi Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell
Yong Cui et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Exploiting Noncovalently Conformational Locking as a Design Strategy for High Performance Fused-Ring Electron Acceptor Used in Polymer Solar Cells
Yahui Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Wenchao Zhao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Unraveling the High Open Circuit Voltage and High Performance of Integrated Perovskite/Organic Bulk-Heterojunction Solar Cells
Shiqi Dong et al.
NANO LETTERS (2017)
High performance thermal-treatment-free tandem polymer solar cells with high fill factors
Shan-Ci Chen et al.
ORGANIC ELECTRONICS (2017)
Recent advances in high performance donor-acceptor polymers for organic photovoltaics
Sarah Holliday et al.
PROGRESS IN POLYMER SCIENCE (2017)
Stability study of high efficiency polymer solar cells using TiOx as electron transport layer
J. G. Sanchez et al.
SOLAR ENERGY (2017)
Improved performance for polymer solar cells using CTAB-modified MoO3 as an anode buffer layer
Yanping Li et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Using ISOS consensus test protocols for development of quantitative life test models in ageing of organic solar cells
J. Kettle et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
A wide temperature tolerance, solution-processed MoOx interface layer for efficient and stable organic solar cells
Cong Xu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)
Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing
Ning Li et al.
NATURE COMMUNICATIONS (2017)
A Switchable Interconnecting Layer for High Performance Tandem Organic Solar Cell
Shunmian Lu et al.
ADVANCED ENERGY MATERIALS (2017)
Burn-in Free Nonfullerene-Based Organic Solar Cells
Nicola Gasparini et al.
ADVANCED ENERGY MATERIALS (2017)
Functional solid additive modified PEDOT: PSS as an anode buffer layer for enhanced photovoltaic performance and stability in polymer solar cells
Binrui Xu et al.
SCIENTIFIC REPORTS (2017)
Counterion-tunable n-type conjugated polyelectrolytes for the interface engineering of efficient polymer solar cells
Zhiming Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Ascorbic acid as an effective antioxidant additive to enhance the efficiency and stability of Pb/Sn-based binary perovskite solar cells
Xiaobao Xu et al.
NANO ENERGY (2017)
Intrinsic non-radiative voltage losses in fullerene-based organic solar cells
Johannes Benduhn et al.
NATURE ENERGY (2017)
Low-bandgap conjugated polymers enabling solution-processable tandem solar cells
Gang Li et al.
NATURE REVIEWS MATERIALS (2017)
Ideal Bandgap Organic-Inorganic Hybrid Perovskite Solar Cells
Zhibin Yang et al.
ADVANCED MATERIALS (2017)
Efficient Semitransparent Organic Solar Cells with Tunable Color enabled by an Ultralow-Bandgap Nonfullerene Acceptor
Yong Cui et al.
ADVANCED MATERIALS (2017)
Naphthalene Diimide Based n-Type Conjugated Polymers as Efficient Cathode Interfacial Materials for Polymer and Perovskite Solar Cells
Tao Jia et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
High-Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration
Lijian Zuo et al.
ADVANCED MATERIALS (2017)
An Efficient, Burn in Free Organic Solar Cell Employing a Nonfullerene Electron Acceptor
Hyojung Cha et al.
ADVANCED MATERIALS (2017)
Fused Hexacyclic Nonfullerene Acceptor with Strong Near-Infrared Absorption for Semitransparent Organic Solar Cells with 9.77% Efficiency
Wei Wang et al.
ADVANCED MATERIALS (2017)
High alcohol-soluble MoOxgel for interfacial layer in organic solar cells
Jian Xiong et al.
CURRENT APPLIED PHYSICS (2017)
Fluorinated Reduced Graphene Oxide as an Efficient Hole-Transport Layer for Efficient and Stable Polymer Solar Cells
Xiaofang Cheng et al.
ACS OMEGA (2017)
Efficient and Stable Ternary Organic Solar Cells Based on Two Planar Nonfullerene Acceptors with Tunable Crystallinity and Phase Miscibility
Jialin Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Achieving 12.8% Efficiency by Simultaneously Improving Open-Circuit Voltage and Short-Circuit Current Density in Tandem Organic Solar Cells
Yunpeng Qin et al.
ADVANCED MATERIALS (2017)
Efficient Semitransparent Solar Cells with High NIR Responsiveness Enabled by a Small-Bandgap Electron Acceptor
Feng Liu et al.
ADVANCED MATERIALS (2017)
Achieving Highly Efficient Nonfullerene Organic Solar Cells with Improved Intermolecular Interaction and Open-Circuit Voltage
Huifeng Yao et al.
ADVANCED MATERIALS (2017)
Self-Doped N-Type Water/Alcohol Soluble-Conjugated Polymers with Tailored Backbones and Polar Groups for Highly Efficient Polymer Solar Cells
Zhicheng Hu et al.
SOLAR RRL (2017)
Excellent Long-Term Stability of Power Conversion Efficiency in NonFullerene-Based Polymer Solar Cells Bearing Tricyanovinylene-Functionalized n-Type Small Molecules
Eun Yi Ko et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Dependence on Material Choice of Degradation of Organic Solar Cells Following Exposure to Humid Air
Tom S. Glen et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2016)
Significant Stability Enhancement in High-Efficiency Polymer:Fullerene Bulk Heterojunction Solar Cells by Blocking Ultraviolet Photons from Solar Light
Jaehoon Jeong et al.
ADVANCED SCIENCE (2016)
Conjugated Polymer Zwitterions: Efficient Interlayer Materials in Organic Electronics
Yao Liu et al.
ACCOUNTS OF CHEMICAL RESEARCH (2016)
High Efficiency Inverted Organic Solar Cells with a Neutral Fulleropyrrolidine Electron-Collecting Interlayer
Weidong Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Highly Efficient and Air Stable Inverted Polymer Solar Cells Using LiF-Modified ITO Cathode and MoO3/AgAl Alloy Anode
Xiangkun Jia et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Long-Term Stable Recombination Layer for Tandem Polymer Solar Cells Using Self-Doped Conducting Polymers
Jinho Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
High-Efficiency Nonfullerene Polymer Solar Cells with Medium Bandgap Polymer Donor and Narrow Bandgap Organic Semiconductor Acceptor
Liang Gao et al.
ADVANCED MATERIALS (2016)
Highly Efficient Fullerene-Free Polymer Solar Cells Fabricated with Polythiophene Derivative
Yunpeng Qin et al.
ADVANCED MATERIALS (2016)
High-Performance Integrated Perovskite and Organic Solar Cells with Enhanced Fill Factors and Near-Infrared Harvesting
Junghwan Kim et al.
ADVANCED MATERIALS (2016)
Nonfullerene Tandem Organic Solar Cells with High Open-Circuit Voltage of 1.97 V
Wenqing Liu et al.
ADVANCED MATERIALS (2016)
Fullerene-Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
Wenchao Zhao et al.
ADVANCED MATERIALS (2016)
Energy-Level Modulation of Small-Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells
Sunsun Li et al.
ADVANCED MATERIALS (2016)
Over 11% Efficiency in Tandem Polymer Solar Cells Featured by a Low-Band-Gap Polymer with Fine-Tuned Properties
Zhong Zheng et al.
ADVANCED MATERIALS (2016)
Long-term stabilization of organic solar cells using hydroperoxide decomposers as additives
Vida Turkovic et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
Removal of Residual Diiodooctane Improves Photostability of High-Performance Organic Solar Cell Polymers
Bertrand J. Tremolet de Villers et al.
CHEMISTRY OF MATERIALS (2016)
Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells
Yankang Yang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells
Zhihong Wu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics
Yuze Lin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
A Novel pH Neutral Self-Doped Polymer for Anode Interfacial Layer in Efficient Polymer Solar Cells
Yong Cui et al.
MACROMOLECULES (2016)
Doped polymer semiconductors with ultrahigh and ultralow work functions for ohmic contacts
Cindy C. Tang et al.
NATURE (2016)
Exploring the origin of high optical absorption in conjugated polymers
Michelle S. Vezie et al.
NATURE MATERIALS (2016)
Degradation by ultra-violet light and its mechanism in organic solar cells
Hiroaki Sato et al.
ORGANIC ELECTRONICS (2016)
Light intensity dependence of External Quantum Efficiency of fresh and degraded organic photovoltaics
E. A. Katz et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor
Sarah Holliday et al.
NATURE COMMUNICATIONS (2016)
11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor
Haijun Bin et al.
NATURE COMMUNICATIONS (2016)
Highly efficient and thermally stable fullerene-free organic solar cells based on a small molecule donor and acceptor
Sachin Badgujar et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Highly planar cross-conjugated alternating polymers with multiple conformational locks: synthesis, characterization and their field-effect properties
Weifeng Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
Perovskite as an effective Voc switcher for high efficiency polymer solar cells
Yuliang Zhang et al.
NANO ENERGY (2016)
Organic solar cells and fully printed super-capacitors optimized for indoor light energy harvesting
Balthazar P. Lechene et al.
NANO ENERGY (2016)
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
Yuze Lin et al.
ADVANCED MATERIALS (2015)
Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells
Chu-Chen Chueh et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
The influence of oxygen adsorption on the NEXAFS and core-level XPS spectra of the C60 derivative PCBM
Iulia Emilia Brumboiu et al.
JOURNAL OF CHEMICAL PHYSICS (2015)
Operational electrochemical stability of thiophene-thiazole copolymers probed by resonant Raman spectroscopy
Jessica Wade et al.
JOURNAL OF CHEMICAL PHYSICS (2015)
A Rhodanine Flanked Nonfullerene Acceptor for Solution-Processed Organic Photovoltaics
Sarah Holliday et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Status and prospects for ternary organic photovoltaics
Luyao Lu et al.
NATURE PHOTONICS (2015)
Solution-processable polymeric solar cells: A review on materials, strategies and cell architectures to overcome 10%
Ikerne Etxebarria et al.
ORGANIC ELECTRONICS (2015)
Collection-limited theory interprets the extraordinary response of single semiconductor organic solar cells
Biswajit Ray et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Radical Cation-Anion Coupling-Induced Work Function Tunability in Anionic Conjugated Polyelectrolytes
Jong-Hoon Lee et al.
ADVANCED ENERGY MATERIALS (2015)
Tin Oxide (SnOx) as Universal Light-Soaking Free Electron Extraction Material for Organic Solar Cells
Sara Trost et al.
ADVANCED ENERGY MATERIALS (2015)
Lifetime of Organic Photovoltaics: Status and Predictions
Suren A. Gevorgyan et al.
Advanced Energy Materials (2015)
Bulk heterojunctions push the photoresponse of perovskite solar cells to 970 nm
Chuantian Zuo et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Enhanced efficiency of polymer photovoltaic cells via the incorporation of a water-soluble naphthalene diimide derivative as a cathode interlayer
Kang Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells
Jizhong Yao et al.
PHYSICAL REVIEW APPLIED (2015)
Solution-Processed pH-Neutral Conjugated Polyelectrolyte Improves Interfacial Contact in Organic Solar Cells
Huiqiong Zhou et al.
ACS NANO (2015)
Integrated Perovskite/Bulk-Heterojunction toward Efficient Solar Cells
Yongsheng Liu et al.
NANO LETTERS (2015)
Broad Work-Function Tunability of p-Type Conjugated Polyelectrolytes for Efficient Organic Solar Cells
Byoung Hoon Lee et al.
ADVANCED ENERGY MATERIALS (2015)
Long-Term Stabilization of Organic Solar Cells Using Hindered Phenols as Additives
Vida Turkovic et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Material Crystallinity as a Determinant of Triplet Dynamics and Oxygen Quenching in Donor Polymers for Organic Photovoltaic Devices
Ying W. Soon et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Conductive Conjugated Polyelectrolyte as Hole-Transporting Layer for Organic Bulk Heterojunction Solar Cells
Huiqiong Zhou et al.
ADVANCED MATERIALS (2014)
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation
Alan J. Heeger
ADVANCED MATERIALS (2014)
H- and J-Aggregate Behavior in Polymeric Semiconductors
Frank C. Spano et al.
ANNUAL REVIEW OF PHYSICAL CHEMISTRY, VOL 65 (2014)
Polaron stability in semiconducting polymer neat films
Daniel Beatrup et al.
CHEMICAL COMMUNICATIONS (2014)
Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
Zhi-Guo Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity
Thomas Heumueller et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Interlaboratory indoor ageing of roll-to-roll and spin coated organic photovoltaic devices: Testing the ISOS tests
Suren A. Gevorgyan et al.
POLYMER DEGRADATION AND STABILITY (2014)
Long-term stable polymer solar cells with significantly reduced burn-in loss
Jaemin Kong et al.
NATURE COMMUNICATIONS (2014)
The Photo-Stability of Polymer Solar Cells: Contact Photo-Degradation and the Benefits of Interfacial Layers
Graeme Williams et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
A Hyperbranched Conjugated Polymer as the Cathode Interlayer for High-Performance Polymer Solar Cells
Menglan Lv et al.
ADVANCED MATERIALS (2013)
Fullerene Derivative-Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low-Bandgap Polymer (PTB7-Th) for High Performance
Sih-Hao Liao et al.
ADVANCED MATERIALS (2013)
Facile Doping of Anionic Narrow-Band-Gap Conjugated Polyelectrolytes During Dialysis
Cheng-Kang Mai et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
The identification, characterization and mitigation of defect states in organic photovoltaic devices: a review and outlook
John A. Carr et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Highly efficient organic tandem solar cells: a follow up review
Tayebeh Ameri et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells
Long Ye et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
A polymer tandem solar cell with 10.6% power conversion efficiency
Jingbi You et al.
NATURE COMMUNICATIONS (2013)
Stability of Polymer Solar Cells
Mikkel Jorgensen et al.
ADVANCED MATERIALS (2012)
Electrostatically Self-Assembled Nonconjugated Polyelectrolytes as an Ideal Interfacial Layer for Inverted Polymer Solar Cells
Hongkyu Kang et al.
ADVANCED MATERIALS (2012)
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
Hin-Lap Yip et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Donor-Donor Block Copolymers for Ternary Organic Solar Cells
Lisa M. Kozycz et al.
MACROMOLECULES (2012)
Materials interface engineering for solution-processed photovoltaics
Michael Graetzel et al.
NATURE (2012)
Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Letian Dou et al.
NATURE PHOTONICS (2012)
A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
Yinhua Zhou et al.
SCIENCE (2012)
The Role of Electron Affinity in Determining Whether Fullerenes Catalyze or Inhibit Photooxidation of Polymers for Solar Cells
Eric T. Hoke et al.
ADVANCED ENERGY MATERIALS (2012)
Recent Advances in Conjugated Polyelectrolytes for Emerging Optoelectronic Applications
Aidee Duarte et al.
CHEMISTRY OF MATERIALS (2011)
The role of buffer layers in polymer solar cells
Riccardo Po et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Modeling Nongeminate Recombination in P3HT:PCBM Solar Cells
Roderick C. I. MacKenzie et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Polymer: fullerene bulk heterojunction solar cells
Jenny Nelson
MATERIALS TODAY (2011)
Consensus stability testing protocols for organic photovoltaic materials and devices
Matthew O. Reese et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Morphology-Dependent Trap Formation in High Performance Polymer Bulk Heterojunction Solar Cells
Zach M. Beiley et al.
ADVANCED ENERGY MATERIALS (2011)
High Efficiency Polymer Solar Cells with Long Operating Lifetimes
Craig H. Peters et al.
ADVANCED ENERGY MATERIALS (2011)
Interface Engineering for Organic Electronics
Hong Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Optimizing Polymer Tandem Solar Cells
Jan Gilot et al.
ADVANCED MATERIALS (2010)
Modeling Charge Transport in Organic Photovoltaic Materials
Jenny Nelson et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Conjugated Polyelectrolytes: Synthesis, Photophysics, and Applications
Hui Jiang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2009)
Design, Synthesis, and Characterization of Ladder-Type Molecules and Polymers. Air-Stable, Solution-Processable n-Channel and Ambipolar Semiconductors for Thin-Film Transistors via Experiment and Theory
Hakan Usta et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
Sung Heum Park et al.
NATURE PHOTONICS (2009)
Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
A complete process for production of flexible large area polymer solar cells entirely using screen printing-First public demonstration
Frederik C. Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Recent Applications of Conjugated Polyelectrolytes in Optoelectronic Devices
Corey V. Hoven et al.
ADVANCED MATERIALS (2008)
Polymer based organic solar cells using ink-jet printed active layers
T. Aernouts et al.
APPLIED PHYSICS LETTERS (2008)
Printing highly efficient organic solar cells
Claudia N. Hoth et al.
NANO LETTERS (2008)
Flexible, long-lived, large-area, organic solar cells
Christoph Lungenschmied et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Efficiency limiting factors of organic bulk heterojunction solar cells identified by electrical impedance spectroscopy
M. Glatthaar et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Comparison of normal and inverse poly(3-hexylthiophene)/fullerene solar cell architectures
M Al-Ibrahim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2005)
分享论文
