相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
Binayak Sen et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)
Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti-6Al-4V alloy
Munish Kumar Gupta et al.
TRIBOLOGY INTERNATIONAL (2021)
Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants
Vinothkumar Sivalingam et al.
TRIBOLOGY INTERNATIONAL (2020)
The effect of laser micro-scale textured tools on the tool-chip interface performance and surface integrity during austenitic stainless-steel turning
Yassmin Seid Ahmed et al.
APPLIED SURFACE SCIENCE (2020)
Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy
Munish Kumar Gupta et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Investigation of hard turning performance of eco-friendly cooling strategies: Cryogenic cooling and nanofluid based MQL
Cagri Vakkas Yildirim
TRIBOLOGY INTERNATIONAL (2020)
Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy
Rupinder Singh et al.
TRIBOLOGY INTERNATIONAL (2020)
Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: an intelligent approach
Munish Kumar Gupta et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2020)
Progress for sustainability in the mist assisted cooling techniques: a critical review
Gurraj Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles
Turgay Kivak et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Synergistic effect of silica and pure palm oil on the machining performances of Inconel 690: A study for promoting minimum quantity nano doped-green lubricants
Binayak Sen et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel
Aqib Mashood Khan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Investigation of the influence of MWCNTs mixed nanofluid on the machinability characteristics of PH 13-8 Mo stainless steel
Oguzhan Ondin et al.
TRIBOLOGY INTERNATIONAL (2020)
Evaluation of turning with different cooling-lubricating techniques in terms of surface integrity and tribologic properties
Radoslaw W. Maruda et al.
TRIBOLOGY INTERNATIONAL (2020)
Performance evaluation of MQL with AL2O3 mixed nanofluids prepared at different concentrations in milling of Hastelloy C276 alloy
Fatih Gunan et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
In-house development of eco-friendly lubrication techniques (EMQL, Nanoparticles plus EMQL and EL) for improving machining performance of 15-5 PHSS
Prassan Shah et al.
TRIBOLOGY INTERNATIONAL (2020)
Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQL
Armando Marques et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Influence of Al2O3 and palm oil-mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules-based FIS model in eco-benign milling
Binayak Sen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V
Xiaoliang Liang et al.
TRIBOLOGY INTERNATIONAL (2019)
The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
Cagri Vakkas Yildirim et al.
TRIBOLOGY INTERNATIONAL (2019)
Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy
Senol Sirin et al.
TRIBOLOGY INTERNATIONAL (2019)
Performance appraisal of various nanofluids during hard machining of AISI 4340 steel
Anshuman Das et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Tool wear and surface roughness analysis in milling with ceramic tools of Waspaloy: a comparison of machining performance with different cooling methods
Cagri Vakkas Yildirim et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Friction and wear mechanisms of castor oil with addition of hexagonal boron nitride nanoparticles
Yongnan Wang et al.
TRIBOLOGY INTERNATIONAL (2018)
Performance of modified jatropha oil in combination with hexagonal boron nitride particles as a bio-based lubricant for green machining
N. Talib et al.
TRIBOLOGY INTERNATIONAL (2018)
Hexagonal Boron Nitride Functionalized with Au Nanoparticles-Properties and Potential Biological Applications
Magdalena Jedrzejczak-Silicka et al.
NANOMATERIALS (2018)
Influence of graphene-based nanofluid with minimum quantity lubrication on surface roughness and cutting temperature in turning operation
Rabesh Kumar Singh et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Effect of the physical properties of different vegetable oil-based nanofluids on MQLC grinding temperature of Ni-based alloy
Benkai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Wear mechanisms during dry and wet turning of Inconel 718 with ceramic tools
Rodrigo P. Zeilmann et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effect of Built-Up Edge Formation during Stable State of Wear in AISI 304 Stainless Steel on Machining Performance and Surface Integrity of the Machined Part
Yassmin Seid Ahmed et al.
MATERIALS (2017)
A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL)
Radoslaw W. Maruda et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysis
Mohammad Lotfi et al.
TRIBOLOGY INTERNATIONAL (2016)
Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Ceramic Tools with Ordinary and Wiper Inserts in Near Dry Machining with High Speed on Super Alloy Monel K500
S. Amini et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Tool wear mechanisms in the machining of Nickel based super-alloys: A review
Waseem Akhtar et al.
FRONTIERS OF MECHANICAL ENGINEERING (2014)
Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialon ceramic tools
Xianhua Tian et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Studies of Standard Heat Treatment Effects on Microstructure and Mechanical Properties of Laser Net Shape Manufactured INCONEL 718
H. Qi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Wear behaviour of alumina based ceramic cutting tools on machining steels
AS Kumar et al.
TRIBOLOGY INTERNATIONAL (2006)
Effect of cutting speed on the performance of Al2O3 based ceramic tools in turning nodular cast iron
N. Camuscu
MATERIALS & DESIGN (2006)
Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining
N. A. Abukhshim et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
The assessment of cutting tool wear
VP Astakhov
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
An overview of the machinability of aeroengine alloys
EO Ezugwu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Machinability of hardened steel using alumina based ceramic cutting tools
AS Kumar et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2003)
Cutting forces and surface finish when machining medium hardness steel using CBN tools
WY Chen
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)
Comparative wear behavior of ceramic and carbide tools during high speed machining of steel
A Chakraborty et al.
MATERIALS AND MANUFACTURING PROCESSES (2000)
分享论文
