相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Formation of rod-shaped wear debris and the graphitization tendency of Cu-doped hydrogenated diamond-like carbon films
Y. L. Gong et al.
DIAMOND AND RELATED MATERIALS (2020)
Physical vapor deposition technology for coated cutting tools: A review
Yang Deng et al.
CERAMICS INTERNATIONAL (2020)
Design of hard coatings deposited by HiPIMS and dcMS
Anas Ghailane et al.
MATERIALS LETTERS (2020)
Influence of Tantalum on phase stability and mechanical properties of WB2
Christoph Fuger et al.
MRS COMMUNICATIONS (2019)
Strategy for simultaneously increasing both hardness and toughness in ZrB2-rich Zr1-xTaxBy thin films
Babak Bakhit et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2019)
Commentary on using H/E and H3/E2 as proxies for fracture toughness of hard coatings
Xinjie Chen et al.
THIN SOLID FILMS (2019)
Microstructure-driven strengthening of TiB2 coatings deposited by pulsed magnetron sputtering
M. N. Polyakov et al.
SURFACE & COATINGS TECHNOLOGY (2019)
High-power impulse magnetron sputter deposition of TiBx thin films: Effects of pressure and growth temperature
Niklas Hellgren et al.
VACUUM (2019)
Response of boride coating on the Ti-6Al-4V alloy to corrosion and fretting corrosion behavior in Ringer's solution for bio-implant application
Sivakumar Bose et al.
APPLIED SURFACE SCIENCE (2018)
Study of the structure, properties, scratch resistance and deformation behaviour of graded Cr-CrN-Cr(1-x)AlxN coatings
Mohammad Sharear Kabir et al.
CERAMICS INTERNATIONAL (2018)
Effect of synchronized bias in the deposition of TiB2 thin films using high power impulse magnetron sputtering
Nils Nedfors et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2018)
Controlling the B/Ti ratio of TiBx thin films grown by high-power impulse magnetron sputtering
Babak Bakhit et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2018)
High-entropy ceramic thin films; A case study on transition metal diborides
P. H. Mayrhofer et al.
SCRIPTA MATERIALIA (2018)
Effect of power density on the microstructure and properties of titanium diboride thin films by radio frequency magnetron sputtering method
Boen Houng et al.
THIN SOLID FILMS (2018)
Ab initio inspired design of ternary boride thin films
Vincent Moraes et al.
SCIENTIFIC REPORTS (2018)
Perspective: Superhard metal borides: A look forward
Georgiy Akopov et al.
APL MATERIALS (2018)
Ti1-xAlxN coatings by Reactive High Power Impulse Magnetron Sputtering: film/substrate interface effect on residual stress and high temperature oxidation
S. M. Deambrosis et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Controlling the boron-to-titanium ratio in magnetron-sputter-deposited TiBx thin films
Ivan Petrov et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2017)
Hard and wear resistant VB2 coatings deposited by pulsed DC magnetron sputtering
Fangfang Ge et al.
VACUUM (2017)
Reciprocating two-body abrasive wear behavior of DC magnetron sputtered Mo-based coatings on hard-chrome plated AISI 316 stainless steel
Parinya Srisattayakul et al.
WEAR (2017)
Rediscovering the Crystal Chemistry of Borides
Georgiy Akopov et al.
ADVANCED MATERIALS (2017)
Corrosion resistance of nanostructured films of titanium diboride in mineral acid solutions
I. I. Korobov et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2016)
Influence of pulse frequency and bias on microstructure and mechanical properties of TiB2 coatings deposited by high power impulse magnetron sputtering
Nils Nedfors et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Effects of sputtering power on microstructure and mechanical properties of TiVCr films
Du-Cheng Tsai et al.
VACUUM (2016)
Structure, composition, and mechanical properties of thin films of transition metals diborides
A. A. Goncharov et al.
JOURNAL OF SUPERHARD MATERIALS (2015)
A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)
Andre Anders
SURFACE & COATINGS TECHNOLOGY (2014)
Effect of Si addition on mechanical properties and high temperature oxidation resistance of Ti-B-Si hard coatings
B. Grancic et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Influence of negative bias voltage and deposition temperature on microstructure and properties of superhard TiB2 coatings deposited by high power impulse magnetron sputtering
Teng Fei Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Nanohardness and tribological properties of nc-TiB2 coatings
F. Lofaj et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
An introduction to thin film processing using high-power impulse magnetron sputtering
Daniel Lundin et al.
JOURNAL OF MATERIALS RESEARCH (2012)
High power impulse magnetron sputtering discharge
J. T. Gudmundsson et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2012)
Hard nanocomposite coatings: Thermal stability, oxidation resistance and toughness
J. Musil
SURFACE & COATINGS TECHNOLOGY (2012)
Influence of high power impulse magnetron sputtering plasma ionization on the microstructure of TiN thin films
A. P. Ehiasarian et al.
JOURNAL OF APPLIED PHYSICS (2011)
The influence of low-energy ion bombardment on the microstructure development and mechanical properties of TiBx coatings
Marian Mikula et al.
VACUUM (2011)
High power pulsed magnetron sputtering: A review on scientific and engineering state of the art
K. Sarakinos et al.
SURFACE & COATINGS TECHNOLOGY (2010)
A structure zone diagram including plasma-based deposition and ion etching
Andre Anders
THIN SOLID FILMS (2010)
Ion energy and mass distributions of the plasma during modulated pulse power magnetron sputtering
J. Lin et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Experiment and simulation of the compositional evolution of Ti-B thin films deposited by sputtering of a compound target
Joerg Neidhardt et al.
JOURNAL OF APPLIED PHYSICS (2008)
Mechanical properties of superhard TiB2 coatings prepared by DC magnetron sputtering
Marian Mikula et al.
VACUUM (2007)
The role of the tribofilm and roll-like debris in the wear of nanoscale nitride PVD coatings
Z. Zhou et al.
WEAR (2007)
Wear resistant TiMoN coatings deposited by magnetron sputtering
Q. Yang et al.
WEAR (2006)
Self-organized nanocolumnar structure in superhard TiB2 thin films -: art. no. 131909
PH Mayrhofer et al.
APPLIED PHYSICS LETTERS (2005)
Comparative study of chromium nitride coatings deposited by unbalanced and balanced magnetron sputtering
JJ Olaya et al.
THIN SOLID FILMS (2005)
Texture, residual stress and structural analysis of thin films using a combined X-ray analysis
L Lutterotti et al.
THIN SOLID FILMS (2004)
The wear behaviour of oxide ceramics - A Review
WM Rainforth
JOURNAL OF MATERIALS SCIENCE (2004)
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
WC Oliver et al.
JOURNAL OF MATERIALS RESEARCH (2004)
Microstructural evolution during film growth
I Petrov et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2003)
Low-stress superhard Ti-B films prepared by magnetron sputtering
F Kunc et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Synthesis and characterization of multilayered TiC/TiB2 coatings deposited by ion beam assisted, electron beam-physical vapor deposition (EB-PVD)
DE Wolfe et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Comprehensive perspective on the mechanism of preferred orientation in reactive-sputter-deposited nitrides
Y Kajikawa et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2003)
Thick physical vapour deposited TiB2 coatings
M Berger
SURFACE ENGINEERING (2002)
Low stress TiB2 coatings with improved tribological properties
M Berger et al.
THIN SOLID FILMS (2001)
An energy description of hard coating wear mechanisms
S Fouvry et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Industrial scale manufactured superlattice hard PVD coatings
WD Munz et al.
SURFACE ENGINEERING (2001)
On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour
A Leyland et al.
WEAR (2000)
Material properties of titanium diboride
RG Munro
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2000)
分享论文
