期刊
SENSORS
卷 20, 期 22, 页码 -出版社
MDPI
DOI: 10.3390/s20226676
关键词
FMCW; LiDAR; FFT; hardware complexity; FPGA; FMCW LiDAR; Digital Down Convert
资金
- Basic Science Research Program through the National Research Foundation of Korea (NRF) - Ministry of Education [2020R1A6A1A03038540]
- MOTIE (Ministry of Trade, Industry and Energy) [10080619]
- KSRC (Korea Semiconductor Research Consortium) support program for the development of the future semiconductor device
- IC Design Education Center (IDEC), Korea
As the autonomous driving technology develops, research on related sensors is also being actively conducted. One system that is widely used today uses a light source with a wavelength in the 905 nm band for the pulse Light Detection And Ranging (LiDAR) system. This has the disadvantages of being harmful to the human eye and in making digital signal processing difficult at high sampling rates. The Frequency Modulated Continuous Wave (FMCW) LiDAR system has been proposed as an alternative. However, the FMCW LiDAR is formed with a high beat frequency by a method different from that of the FMCW Radar, which causes a hardware burden on the FFT (Fast Fourier Transform) module for interpreting the beat frequency information. In this paper, the FFT module that may occur in the FMCW LiDAR using Digital Down Convert (DDC) technology is extracted at 256 points, which is 25 times smaller than the existing 8192 points, and the beat frequency is 0 to 50 m at 3 cm intervals. As a result of generating and restoring the distance, the performance of 0.03 m Root Mean Square Error (RMSE) compared to the conventional one was confirmed. In this process, the hardware module was directly mounted and verified on the FPGA. In the case of the Simple Threshold-Constant False Alarm Rate (ST-CFAR) provided, the RMSE was measured by generating beat frequencies from 0 to 50 m at 1 cm intervals, and as a result, the result of 0.019 m was confirmed at 0.03 m in the past.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据