相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of Si content on microstructures, tensile properties, and creep properties in a cast Mg-6Al-0.4Mn-2Ca (wt.%) alloy
T. Nakata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
New Mg-Al based alloy sheet with good room-temperature stretch formability and tensile properties
T. Nakata et al.
SCRIPTA MATERIALIA (2020)
The effect of initial texture on micromechanical deformation behaviors in Mg alloys under a mini-V-bending test
Jaiveer Singh et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Achieving ultra-low planar anisotropy and high stretch formability in a Mg-1.1Zn-0.76Y-0.56Zr sheet by texture tailoring via final-pass heavy reduction rolling
B. Q. Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Origins of high strength and ductility combination in a Guinier-Preston zone containing Mg-Al-Ca-Mn alloy
J. J. Bhattacharyya et al.
SCRIPTA MATERIALIA (2019)
Strain heterogeneity and micro-damage nucleation under tensile stresses in an Mg-5Al-3Ca alloy with an intermetallic skeleton
M. Zubair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Controlling the microstructure and improving the tensile properties of extruded Mg-Sn-Zn alloy through Al addition
Sang-Hoon Kim et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Designing a magnesium alloy with high strength and high formability
T. T. T. Trang et al.
NATURE COMMUNICATIONS (2018)
Bake-hardenable Mg-Al-Zn-Mn-Ca sheet alloy processed by twin-roll casting
M. Z. Bian et al.
ACTA MATERIALIA (2018)
Enhancing mechanical properties of rolled Mg-Al-Ca-Mn alloy sheet by Zn addition
T. Nakata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
The role of Al content on deformation behavior and related texture evolution during hot rolling of Mg-Al-Zn alloys
Fei Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure and mechanical anisotropy of the hot rolled Mg-8.1Al-0.7Zn-0.15Ag alloy
Longhui Mao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Deformation behaviors of twin roll cast Mg-Zn-X-Ca alloys for enhanced room-temperature formability
Sang Jun Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Improved stretch formability of AZ31 sheet via grain size control
Joong Won Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A heat-treatable Mg-Al-Ca-Mn-Zn sheet alloy with good room temperature formability
M. Z. Bian et al.
SCRIPTA MATERIALIA (2017)
Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys
T. Nakata et al.
ACTA MATERIALIA (2017)
Effect of strain rate and temperature on fracture of magnesium alloy AZ31B
A. K. Rodriguez et al.
ACTA MATERIALIA (2016)
Improving Formability of Mg-Ca-Zr Sheet Alloy by Microalloying of Zn
Ming Zhe Bian et al.
ADVANCED ENGINEERING MATERIALS (2016)
Microstructure and mechanical properties of Mg-6.75%Zn-0.57%Zr-0.4%Y-0.18%Gd sheets by unidirectional and cross rolling
Zhang Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of processing route on texture and cold formability of AZ31 Mg alloy sheets processed by ECAP
Joungsik Suh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of aluminum content on the texture and sheet formability of AM series magnesium alloys
Xinsheng Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The role of deformation twinning in the fracture behavior and mechanism of basal textured magnesium alloys
D. Ando et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of Stress Triaxiality on the Flow and Fracture of Mg Alloy AZ31
Babak Kondori et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Texture Evolution in Mg-Zn-Ca Alloy Sheets
D. -W. Kim et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
On crystal plasticity formability analysis for magnesium alloy sheets
H. Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)
Microstructure and mechanical properties of Mg-Al-Mn-Ca alloy sheet produced by twin roll casting and sequential warm rolling
Yinong Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Mechanical properties and anisotropy of ME20 magnesium sheet produced by unidirectional and cross rolling
X. Li et al.
MATERIALS & DESIGN (2011)
Deformation behavior of as-rolled and strip-cast AZ31 magnesium alloy sheets
Hyung Lae Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effects of Ca on Tensile Properties and Stretch Formability at Room Temperature in Mg-Zn and Mg-Al Alloys
Yasumasa Chino et al.
MATERIALS TRANSACTIONS (2011)
Effects of aging parameters on formability of 6061-O alloy
Fahrettin Ozturk et al.
MATERIALS & DESIGN (2010)
Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature
D. H. Kang et al.
SCRIPTA MATERIALIA (2009)
On the influence of particle distribution and reverse loading on damage mechanisms of ductile steels
P. O. Bouchard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Microstructure and mechanical properties of Mg-4.5Al-1.0Zn alloy sheets produced by twin roll casting and sequential warm rolling
Hongmei Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Grain size effects on the tensile properties and deformation mechanisms of a magnesium alloy, AZ31B, sheet
A. Jain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Room temperature formability of a magnesium AZ31 alloy: Examining the role of texture on the deformation mechanisms
T. Al-Samman et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
The influences of alloying additions and processing parameters on the rolling microstructures and textures of magnesium alloys
L. W. F. Mackenzie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Twinning and the ductility of magnesium alloys Part II. Contraction twins
M. R. Barnett
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
On the influence of the grain size and solute content on the AE response of magnesium alloys tested in tension and compression
Jan Bohlen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
The texture and anisotropy of magnesium-zinc-rare earth alloy sheets
Jan Bohlen et al.
ACTA MATERIALIA (2007)
Influence of texture and grain size on work hardening and ductility in magnesium-based alloys processed by ECAP and rolling
J. A. del Valle et al.
ACTA MATERIALIA (2006)
Tensile properties and bendability of T4 treated AA6111 aluminum alloys
J Sarkar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Corrosion resistance of aged die cast magnesium alloy AZ91D
GL Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Anisotropic ductile fracture Part I: experiments
AA Benzerga et al.
ACTA MATERIALIA (2004)
Combustion of magnesium alloys in air
TS Shih et al.
MATERIALS CHEMISTRY AND PHYSICS (2004)
Structure and transition of eutectic (Mg,Al)2Ca Laves phase in a die-cast Mg-Al-Ca base alloy
A Suzuki et al.
SCRIPTA MATERIALIA (2004)
Influence of rolling conditions on the microstructure and mechanical properties of magnesium sheet AZ31
F Kaiser et al.
ADVANCED ENGINEERING MATERIALS (2003)
Effects of Si on the aging behaviour and formability of aluminium alloys based on AA6016
SM Hirth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Factors affecting the strength and formability of alloys based on Al-3 wt.% Mg
SA Court et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
The effect of calcium additions on the oxidation behavior in magnesium alloys
BS You et al.
SCRIPTA MATERIALIA (2000)