相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Composition and processing design of medium-Mn steels based on CALPHAD, SFE modeling, and genetic optimization
John S. Aristeidakis et al.
ACTA MATERIALIA (2020)
The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ → ε → α′ transformation to twinning
I. R. Souza Filho et al.
ACTA MATERIALIA (2020)
Influence of initial microstructures on intercritical annealing behaviour in a medium Mn steel
Yong Hoon Choi et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
Effect of austenite stability on toughness, ductility, and work-hardening of medium-Mn steel
Xiangyu Qi et al.
MATERIALS SCIENCE AND TECHNOLOGY (2019)
Age-hardening medium Mn steel with high strength and large ductility
Bao-Guang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure evolution and strain behavior of a medium Mn TRIP/TWIP steel for excellent combination of strength and ductility
Tong Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Resetting the Austenite Stability in a Medium Mn Steel via Dislocation Engineering
B. B. He et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Super-high-strength and formable medium Mn steel manufactured by warm rolling process
Bin Hu et al.
ACTA MATERIALIA (2019)
Effect of thermomechanical processing at α plus γ two-phase temperatures on microstructure and mechanical property of 5Mn-0.1C-2Si medium-manganese steel
Yu Bai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite
Binhan Sun et al.
ACTA MATERIALIA (2019)
Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
J. T. Benzing et al.
ACTA MATERIALIA (2019)
Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel
Ran Ding et al.
ACTA MATERIALIA (2018)
The effects of the initial microstructure on microstructural evolution, mechanical properties and reversed austenite stability of intercritically annealed Fe-6.1Mn-1.5Si-0.12C steel
Shu Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions
Binhan Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Ultrafine also can be ductile: On the essence of Luders band elongation in ultrafine-grained medium manganese steel
Y. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Chemistry and Properties of Medium-Mn Two-Stage TRIP Steels
Daniel M. Field et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Thermomechanical processing of advanced high strength steels
Jingwei Zhao et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Recent progress in medium-Mn steels made with new designing strategies, a review
Bin Hu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)
Characterization of fracture in medium Mn steel
Hongki Choi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Alloy Design Based on Computational Thermodynamics and Multi-objective Optimization: The Case of Medium-Mn Steels
John S. Aristeidakis et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Tensile Properties of Medium Mn Steel with a Bimodal UFG α plus γ and Coarse δ-Ferrite Microstructure
Seonjong Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Influence of Temperature and Grain Size on Austenite Stability in Medium Manganese Steels
Yulong Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Current state of Fe-Mn-Al-C low density steels
Shangping Chen et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel
Binhan Sun et al.
SCRIPTA MATERIALIA (2017)
The significance of multi-step partitioning: Processing-structure property relationship in governing high strength-high ductility combination in medium-manganese steels
S. Liu et al.
ACTA MATERIALIA (2017)
The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel
Jeongho Han et al.
ACTA MATERIALIA (2017)
Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP plus TRIP steel
Marat I. Latypov et al.
ACTA MATERIALIA (2016)
Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel
Eun Jung Seo et al.
ACTA MATERIALIA (2016)
Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects
B. B. He et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Coupled strengthening in a medium manganese lightweight steel with an inhomogeneously grained structure of austenite
Chan-Young Lee et al.
ACTA MATERIALIA (2015)
Kinetics of Solute Partitioning During Intercritical Annealing of a Medium-Mn Steel
H. Kamoutsi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Observation of the TWIP plus TRIP Plasticity-Enhancement Mechanism in Al-Added 6 Wt Pct Medium Mn Steel
Seawoong Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
A Composite Modeling Analysis of the Deformation Behavior of Medium Manganese Steels
Radhakanta Rana et al.
STEEL RESEARCH INTERNATIONAL (2015)
Profex: a graphical user interface for the Rietveld refinement program BGMN
Nicola Doebelin et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2015)
Effect of intercritical annealing on the Luders strains of medium Mn transformation-induced plasticity steels
Haiwen Luo et al.
MATERIALS & DESIGN (2015)
Thermodynamic calculation of stacking fault energy of the Fe-Mn-Si-C high manganese steels
Renlong Xiong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Annealing twin development during recrystallization and grain growth in pure nickel
Y. Jin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Tensile Behavior of Intercritically Annealed 10 pct Mn Multi-phase Steel
Sangwon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
A Novel Mo and Nb Microalloyed Medium Mn TRIP Steel with Maximal Ultimate Strength and Moderate Ductility
Minghui Cai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel
Sangwon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Crystallization Characteristics of CaO-Al2O3-Based Mold Flux and Their Effects on In-Mold Performance during High-Aluminum TRIP Steels Continuous Casting
Cheng-Bin Shi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Unique serrated flow dependence of critical stress in a hot-rolled Fe-Mn-Al-C steel
Z. H. Cai et al.
SCRIPTA MATERIALIA (2014)
Development of 3rd generation AHSS with medium Mn content alloying compositions
Huseyin Aydin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure and tensile behavior of duplex low-density steel containing 5 mass% aluminum
S. -J. Park et al.
SCRIPTA MATERIALIA (2013)
Influence of Silicon in Low Density Fe-C-Mn-Al Steel
Yoon-Uk Heo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
A Review of Strain Analysis Using Electron Backscatter Diffraction
Stuart I. Wright et al.
MICROSCOPY AND MICROANALYSIS (2011)
Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels
Kwang-Geun Chin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel
P. J. Gibbs et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Austenite stabilization through manganese enrichment
Emmanuel De Moor et al.
SCRIPTA MATERIALIA (2011)
Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate
S. Curtze et al.
ACTA MATERIALIA (2010)
Effects of the thermodynamic parameters of the hcp phase on the stacking fault energy calculations in the Fe-Mn and Fe-Mn-C systems
Jinichiro Nakano et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2010)
Tensile deformation behavior of high manganese austenitic steel: The role of grain size
G. Dini et al.
MATERIALS & DESIGN (2010)
Characterisation of the Portevin-Le Chatelier effect affecting an austenitic TWIP steel based on digital image correlation
K. Renard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Influence of Al on the Microstructural Evolution and Mechanical Behavior of Low-Carbon, Manganese Transformation-Induced-Plasticity Steel
Dong-Woo Suh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
A. Saeed-Akbari et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Vehicle mass as a determinant of fuel consumption and secondary safety performance
Reza Tolouei et al.
TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT (2009)
Reverse martensitic transformation and resulting microstructure in a cold rolled metastable austenitic stainless steel
Axel Knutsson et al.
STEEL RESEARCH INTERNATIONAL (2008)
Metallurgical aspects of casting high-manganese steel grades
G. Gigacher et al.
ADVANCED ENGINEERING MATERIALS (2006)
A method of measuring stored energy macroscopically using statistically stored dislocations in commercial purity aluminum
M Taheri et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys
S Allain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Stored energy and Taylor factor relation in an Al-Mg-Mn alloy sheet worked by continuous cyclic bending
Y Takayama et al.
MATERIALS TRANSACTIONS (2004)
Strain hardening of titanium: role of deformation twinning
AA Salem et al.
ACTA MATERIALIA (2003)
Carbon partitioning into austenite after martensite transformation
J Speer et al.
ACTA MATERIALIA (2003)
Galvanisability of silicon free CMnAI TRIP steels
J Maki et al.
MATERIALS SCIENCE AND TECHNOLOGY (2003)
THERMO-CALC & DICTRA, computational tools for materials science
JO Andersson et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2002)
On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels
PJ Jacques et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
分享论文
