相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Orientation dependent behavior of tensile-creep deformation of hot rolled Ti65 titanium alloy sheet
Zhixin Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
A review on thermohydraulic and mechanical-physical properties of SiC, FeCrAl and Ti3SiC2 for ATF cladding
Bowen Qiu et al.
NUCLEAR ENGINEERING AND TECHNOLOGY (2020)
A coupled, physics-based matrix-grain boundary model for creep of carbide strengthened nickel-based superalloys - I. Concepts and formulation
Michael Lapera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The effect of Nb and Si on the hot corrosion behaviors of TiAl coatings on a Ti-6Al-4V alloy
Jingjie Dai et al.
CORROSION SCIENCE (2020)
Nanostructural Sc-based hierarchy to improve the creep resistance of Al-Cu alloys
Chong Yang et al.
MATERIALS & DESIGN (2020)
Effect of radiation damage and water radiolysis on corrosion of FeCrAl alloys in hydrogenated water
Peng Wang et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Hydrothermal corrosion of 2nd generation FeCrAl alloys for accident tolerant fuel cladding *
Stephen S. Raiman et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Early corrosion behaviour of irradiated FeCrAl alloy in a simulated pressurized water reactor environment
Weisong Wu et al.
CORROSION SCIENCE (2020)
High-temperature creep deformation in FeCrAl-oxide dispersion strengthened alloy cladding
S. Ukai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Creep behavior of an alumina-forming austenitic steel with simple alloy design
Man Wang et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300°C
Y. H. Gao et al.
MATERIALS RESEARCH LETTERS (2019)
Cooperative grain boundary sliding in creep deformation of FeCrAl-ODS steels at high temperature and low strain rate
R. Kamikawa et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials
Ke Huang et al.
PROGRESS IN MATERIALS SCIENCE (2018)
The influence of silicon on the corrosion properties of FeCrAl model alloys in oxidizing environments at 600 degrees C
J. Eklund et al.
CORROSION SCIENCE (2018)
Influence of composition and heating schedules on compatibility of FeCrAl alloys with high-temperature steam
Chongchong Tang et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Crystallographic orientation dependent crack nucleation during the compression of a widmannstatten-structure α/β titanium alloy
Zhibing Yan et al.
SCRIPTA MATERIALIA (2018)
Effect of Yb microadditions on creep resistance of a dilute Al-Er-Sc-Zr alloy
Nhon Q. Vo et al.
MATERIALIA (2018)
Processability evaluation of a Mo-containing FeCrAl alloy for seamless thin wall tube fabrication
Zhiciian Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of scandium micro-alloying on the creep resistance properties of Al-0.7Fe alloy cables
Jiayi Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Improved creep strength of alumina-forming austenitic heat-resistant steels through W addition
Min-Ho Jang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Structure and composition of oxides in FeCrAl ODS alloy with Zr addition
Haijian Xu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Heterogeneous Creep Deformations and Correlation to Microstructures in Fe-30Cr-3Al Alloys Strengthened by an Fe2Nb Laves Phase
Benjamin Shassere et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Transgranular dislocation activities and substructural evolutions accommodating two-dimensional grain boundary sliding in ODS ferritic steel
Hiroshi Masuda et al.
ACTA MATERIALIA (2017)
Two-dimensional grain boundary sliding and mantle dislocation accommodation in ODS ferritic steel
Hiroshi Masuda et al.
ACTA MATERIALIA (2016)
Formation and stability of oxide layer in FeCrAl fuel cladding material under high-temperature steam
Dong Pan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Grain boundary sliding associated with low strain rate at 1000°C in recrystallized ODS ferritic steel
R. Kamikawa et al.
NUCLEAR MATERIALS AND ENERGY (2016)
Microstructural changes in a neutron-irradiated Fe-15 at.%Cr alloy
Mukesh Bachhav et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Grain boundary sliding at high temperature deformation in cold-rolled ODS ferritic steels
Yoshito Sugino et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
The Oxidation Mechanism of FeCrAl Alloy Added with Rare Earth Y from First-principle Study
Guoying Zhang et al.
MATERIALS SCIENCE, MACHINERY AND ENERGY ENGINEERING (2014)
Design of alumina forming FeCrAl steels for lead or lead-bismuth cooled fast reactors
Jun Lim et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
Influence of dispersoids on microstructure evolution and work hardening of aluminium alloys during tension and cold rolling
Qinglong Zhao et al.
PHILOSOPHICAL MAGAZINE (2013)
Laves phase evolution in a modified P911 heat resistant steel during creep at 923K
A. Kipelova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Status and key issues of reduced activation ferritic/martensitic steels as the structural material for a DEMO blanket
H. Tanigawa et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Precipitation and mechanical properties of Nb-modified ferritic stainless steel during isothermal aging
Haitao Yan et al.
MATERIALS CHARACTERIZATION (2009)
Creep behavior of in situ TiCP/2618 aluminum matrix composite
F. Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
High creep resistance behavior of the casting Al-Cu alloy modified by La
Dongming Yao et al.
SCRIPTA MATERIALIA (2009)
Creep mechanisms in TI-3Al-2.5V alloy tubing deformed under closed-end internal gas pressurization
S. Gollapudi et al.
ACTA MATERIALIA (2008)
Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction
W. Pantleon
SCRIPTA MATERIALIA (2008)
Mechanical properties of as cast microalloyed steels containing V, Nb and Ti
H. Najafi et al.
MATERIALS SCIENCE AND TECHNOLOGY (2007)
Effect of Nb precipitate coarsening on the high temperature strength in Nb containing ferritic stainless steels
GM Sim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Changes of microstructures and high temperature properties during high temperature service of Niobium added ferritic stainless steels
N Fujita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Design of Laves phase strengthened ferritic heat resisting steels in the Fe-Cr-Nb(-Ni) system
K Yamamoto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
分享论文
