相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Neutron irradiation effects on the mechanical properties of powder metallurgical processed tungsten alloys
Takeshi Miyazawa et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Tungsten modified by potassium doping and rhenium addition for fusion reactor applications
Shuhei Nogami et al.
FUSION ENGINEERING AND DESIGN (2020)
Helium effects on recovery and recrystallization of powder metallurgically processed tungsten
Akira Hasegawa et al.
PHYSICA SCRIPTA (2020)
Thermal shock behavior of potassium doped and rhenium added tungsten alloys
S. Nogami et al.
PHYSICA SCRIPTA (2020)
Impact of neutron irradiation on the strength and ductility of pure and ZrC reinforced tungsten grades
Chao Yin et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Tensile properties of powder-metallurgical-processed tungsten alloys after neutron irradiation near recrystallization temperatures
Takeshi Miyazawa et al.
JOURNAL OF NUCLEAR MATERIALS (2020)
Stagnant recrystallization in warm-rolled tungsten in the temperature range from 1150 °C to 1300 °C
Umberto Maria Ciucani et al.
FUSION ENGINEERING AND DESIGN (2019)
Improvement of impact properties of tungsten by potassium doping
Shuhei Nogami et al.
FUSION ENGINEERING AND DESIGN (2019)
Behavior of tungsten under irradiation and plasma interaction
Michael Rieth et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Response of unalloyed tungsten to mixed spectrum neutrons
Y. Katoh et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
PHENIX US-Japan Collaboration Investigation of Thermal and Mechanical Properties of Thermal Neutron-Shielded Irradiated Tungsten
Lauren M. Garrison et al.
FUSION SCIENCE AND TECHNOLOGY (2019)
Mechanical properties of single-crystal tungsten irradiated in a mixed spectrum fission reactor
L. M. Garrison et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Tensile and impact properties of tungsten-rhenium alloy for plasma-facing components in fusion reactor
Shotaro Watanabe et al.
FUSION ENGINEERING AND DESIGN (2019)
Effects of neutron irradiation on the brittle to ductile transition in single crystal tungsten
R. G. Abernethy et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Transmutation-induced precipitation in tungsten irradiated with a mixed energy neutron spectrum
Xunxiang Hu et al.
ACTA MATERIALIA (2019)
Solid state diffusion bonding of doped tungsten alloys with different thermo-mechanical properties
Shuhei Nogami et al.
FUSION ENGINEERING AND DESIGN (2018)
Thermal properties of pure tungsten and its alloys for fusion applications
Makoto Fukudal et al.
FUSION ENGINEERING AND DESIGN (2018)
The brittle-to-ductile transition in cold rolled tungsten: On the decrease of the brittle-to-ductile transition by 600 K to-65 °C
Carsten Bonnekoh et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Fatigue properties of tungsten from two different processing routes
Jemila Habainy et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Effect of neutron irradiation on rhenium cluster formation in tungsten and tungsten-rhenium alloys
Taehyun Hwang et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
A review of impact properties of tungsten materials
Shuhei Nogami et al.
FUSION ENGINEERING AND DESIGN (2018)
Effects of helium on mechanical properties of tungsten for fusion applications
Takeshi Miyazawa et al.
NUCLEAR MATERIALS AND ENERGY (2018)
Isothermal annealing of thin rolled tungsten plates in the temperature range from 1300 °C to 1400 °C
Umberto M. Ciucani et al.
NUCLEAR MATERIALS AND ENERGY (2018)
Degradation of tungsten monoblock divertor under cyclic high heat flux loading
Shuhei Nogami et al.
FUSION ENGINEERING AND DESIGN (2017)
Hardness loss and microstructure evolution of 90% hot-rolled pure tungsten at 1200-1350°C
Ming Yu et al.
FUSION ENGINEERING AND DESIGN (2017)
Effects of thickness reduction on recrystallization process of warm-rolled pure tungsten plates at 1350 °C
Kang Wang et al.
FUSION ENGINEERING AND DESIGN (2017)
Feasibility of Utilizing Tungsten Rod for Fusion Reactor Divertor
Shuhei Nogami et al.
FUSION SCIENCE AND TECHNOLOGY (2017)
Ductilisation of tungsten (W): Tungsten laminated composites
Jens Reiser et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2017)
Microstructural evolution of pure tungsten neutron irradiated with a mixed energy spectrum
Takaaki Koyanagi et al.
JOURNAL OF NUCLEAR MATERIALS (2017)
Overview of the IFMIF/EVEDA project
J. Knaster et al.
NUCLEAR FUSION (2017)
Improved structural strength and lifetime of monoblock divertor targets by using doped tungsten alloys under cyclic high heat flux loading
S. Nogami et al.
PHYSICA SCRIPTA (2017)
Tensile and fatigue properties of potassium doped and rhenium containing tungsten rods for fusion reactor applications
Wenhai Guan et al.
FUSION ENGINEERING AND DESIGN (2016)
Effect of microstructural anisotropy on the mechanical properties of K-doped tungsten rods for plasma facing components
Shuhei Nogami et al.
FUSION ENGINEERING AND DESIGN (2016)
Evaluation of impacts of stress triaxiality on plastic deformability of RAFM steel using various types of tensile specimen
Taichiro Kato et al.
FUSION ENGINEERING AND DESIGN (2016)
Analysis of the temperature and thermal stress in pure tungsten monoblock during heat loading and the influences of alloying and dispersion strengthening on these responses
Makoto Fukuda et al.
FUSION ENGINEERING AND DESIGN (2016)
A study of plasma facing tungsten components with electrical discharge machined surface exposed to cyclic thermal loads
Yohji Seki et al.
FUSION ENGINEERING AND DESIGN (2016)
Strain rate dependence of tensile properties of tungsten alloys for plasma-facing components in fusion reactors
Makoto Fukuda et al.
FUSION ENGINEERING AND DESIGN (2016)
Defect evolution in single crystalline tungsten following low temperature and low dose neutron irradiation
Xunxiang Hu et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Neutron energy spectrum influence on irradiation hardening and microstructural development of tungsten
Makoto Fukuda et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Irradiation hardening of pure tungsten exposed to neutron irradiation
Xunxiang Hu et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Neutron irradiation effects on the microstructural development of tungsten and tungsten alloys
Akira Hasegawa et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
Effect of neutron irradiation on the microstructure of tungsten
M. Klimenkov et al.
NUCLEAR MATERIALS AND ENERGY (2016)
Thermal stability of a highly-deformed warm-rolled tungsten plate in the temperature range 1100-1250 °C
A. Alfonso et al.
FUSION ENGINEERING AND DESIGN (2015)
Interpretation of the deep cracking phenomenon of tungsten monoblock targets observed in high-heat-flux fatigue tests at 20 MW/m2
Muyuan Li et al.
FUSION ENGINEERING AND DESIGN (2015)
Overview on recent progress toward small specimen test technique
Eiichi Wakai et al.
FUSION ENGINEERING AND DESIGN (2015)
ANISOTROPY IN THE MECHANICAL PROPERTIES OF POTASSIUM AND RHENIUM DOPED TUNGSTEN ALLOY PLATES FOR FUSION REACTOR APPLICATIONS
Makoto Fukuda et al.
FUSION SCIENCE AND TECHNOLOGY (2015)
Fatigue behavior of rolled and forged tungsten at 25°, 280° and 480 °C
J. Habainy et al.
JOURNAL OF NUCLEAR MATERIALS (2015)
Effects of temperature and strain rate on the tensile properties of potassium-doped tungsten
Kenta Sasaki et al.
JOURNAL OF NUCLEAR MATERIALS (2015)
Neutron irradiation effects on tungsten materials
Akira Hasegawa et al.
FUSION ENGINEERING AND DESIGN (2014)
Tensile properties of K-doped W-3%Re
Makoto Fukuda et al.
FUSION ENGINEERING AND DESIGN (2014)
Fracture behaviour of polycrystalline tungsten
Ermile Gaganidze et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Microstructural development of tungsten and tungsten-rhenium alloys due to neutron irradiation in HFIR
Makoto Fukuda et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Recrystallization kinetics of warm-rolled tungsten in the temperature range 1150-1350 °C
A. Alfonso et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Microstructure development of dispersion-strengthened tungsten due to neutron irradiation
Makoto Fukuda et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
High heat flux capabilities of the Magnum-PSI linear plasma device
G. De Temmerman et al.
FUSION ENGINEERING AND DESIGN (2013)
Nuclear analysis of the ITER full-tungsten divertor
R. Villari et al.
FUSION ENGINEERING AND DESIGN (2013)
Qualification and post-mortem characterization of tungsten mock-ups exposed to cyclic high heat flux loading
G. Pintsuk et al.
FUSION ENGINEERING AND DESIGN (2013)
ITER tungsten divertor design development and qualification program
T. Hirai et al.
FUSION ENGINEERING AND DESIGN (2013)
Development of fatigue life evaluation method using small specimen
Shuhei Nogami et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
Property change of advanced tungsten alloys due to neutron irradiation
Makoto Fukuda et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
Charpy impact properties of pure tungsten plate material in as-received and recrystallized condition (1 h at 2000 °C (2273 K))
J. Reiser et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials
S. Wurster et al.
JOURNAL OF NUCLEAR MATERIALS (2013)
THE IMPACT OF REFRACTORY MATERIAL PROPERTIES ON THE HELIUM COOLED DIVERTOR DESIGN
Michael Rieth et al.
FUSION SCIENCE AND TECHNOLOGY (2012)
Effects of Re Content and Fabrication Process on Microstructural Changes and Hardening in Neutron Irradiated Tungsten
Makoto Fukuda et al.
MATERIALS TRANSACTIONS (2012)
Estimations of the True Stress and True Strain until Just before Fracture by the Stepwise Tensile Test and Bridgman Equation for Various Metals and Alloys
N. Tsuchida et al.
MATERIALS TRANSACTIONS (2012)
An integrated model for materials in a fusion power plant: transmutation, gas production, and helium embrittlement under neutron irradiation
M. R. Gilbert et al.
NUCLEAR FUSION (2012)
Design plan and requirement of test module and testing items in IFMIF
Eiichi Wakai et al.
FUSION ENGINEERING AND DESIGN (2011)
Small specimen test technology and methodology of IFMIF/EVEDA and the further subjects
E. Wakai et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Experimental simulation of Edge Localised Modes using focused electron beams - features of a circular load pattern
Th Loewenhoff et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Property change mechanism in tungsten under neutron irradiation in various reactors
Akira Hasegawa et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Loading rate dependence of the fracture toughness of polycrystalline tungsten
Daniel Rupp et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Fracture toughness and microstructural characterization of polycrystalline rolled tungsten
D. Rupp et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Influence of microstructure and notch fabrication on impact bending properties of tungsten materials
M. Rieth et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
100 years of doped tungsten wire
P. Schade
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Fracture toughness of polycrystalline tungsten alloys
B. Gludovatz et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2010)
Development of re-crystallized W-1.1%TiC with enhanced room-temperature ductility and radiation performance
H. Kurishita et al.
JOURNAL OF NUCLEAR MATERIALS (2010)
Anisotropic fracture behaviour and brittle-to-ductile transition of polycrystalline tungsten
D. Rupp et al.
PHILOSOPHICAL MAGAZINE (2010)
Effects of transmutation elements on the microstructural evolution and electrical resistivity of neutron-irradiated tungsten
T. Tanno et al.
JOURNAL OF NUCLEAR MATERIALS (2009)
Effect of low-temperature rolling on the tensile behavior of commercially pure tungsten
Q. Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Precipitation of Solid Transmutation Elements in Irradiated Tungsten Alloys
Takashi Tanno et al.
MATERIALS TRANSACTIONS (2008)
Effects of transmutation elements on neutron irradiation hardening of tungsten
Takashi Tanno et al.
MATERIALS TRANSACTIONS (2007)
High heat flux facility GLADIS: Operational characteristics and results of W7-X pre-series target tests
H. Greuner et al.
JOURNAL OF NUCLEAR MATERIALS (2007)
An empirical correlation between temperature and activation energy for brittle-to-ductile transitions in single-phase materials
A. Giannattasio et al.
PHYSICA SCRIPTA (2007)
Strain-rate dependence of the brittle-to-ductile transition temperature in tungsten
A. Giannattasio et al.
PHILOSOPHICAL MAGAZINE (2007)
The new electron beam test facility JUDITH II for high heat flux experiments on plasma facing components
P Majerus et al.
FUSION ENGINEERING AND DESIGN (2005)
Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals
Q Wei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Brittle fracture and the brittle-to-ductile transition of tungsten
P Gumbsch
JOURNAL OF NUCLEAR MATERIALS (2003)
Temperature dependence of thermal conductivity in W and W-Re alloys from 300 to 1000 K
T Tanabe et al.
MATERIALS LETTERS (2003)
Development of tungsten-based vacuum melted and powder structural alloys
P Makarov et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2002)
分享论文
