期刊
JOURNAL OF HAZARDOUS MATERIALS
卷 412, 期 -, 页码 -出版社
ELSEVIER
DOI: 10.1016/j.jhazmat.2021.125225
关键词
Metal plating wastes; Zinc; Silicone polymers; Stabilisation; solidification; Leaching tests
资金
- Tomas Bata University in Zlin, Czechia [IGA/FT/2017/003]
This paper investigates the treatment of hazardous zinc-bearing waste using hydraulic binders and silicone polymers, and evaluates the effectiveness of the process through experiments. The results demonstrate that the two-step treatment method is more effective than using silicone polymers alone, with the porosity of the encapsulated waste being the main factor affecting leachability.
This paper deals with the treatment of hazardous zinc-bearing waste using hydraulic binders and silicone polymers, with the aim to allow its safe disposal into landfill. The waste was solidified using hydraulic binders in the first step and then encapsulated using silicone polymers. Samples were characterised using x-ray fluorescence, x-ray diffraction, and scanning electron microscopy. The effectiveness of the process was evaluated by leaching tests in distilled water and in an acidic environment according to Toxicity Characteristic Leaching Procedure. The effect of porosity and pH on the release of pollutants was also studied. Zinc and chloride were identified as the most significant pollutants in the waste. Portland cement did not stabilize them efficiently. The two-step treatment with Portland cement and silicone binders decreased, in the best case, the concentration of zinc and chloride in acidic extracts from 12,400 mg/L and 38,300 mg/L to 21.9 mg/L and 74 mg/L, respectively, and the treated waste complied with regulatory requirements for hazardous waste disposal into landfills. The two-step treatment was also found as a more effective method than microencapsulation using a silicone binder alone. The factor that most affects leachability appears to be the porosity of the encapsulated waste.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据