Environmentally friendly biological nanofibers based on waste feather keratin by electrospinning with citric acid vapor modification

Waste feather keratin (FK)-based nanofibers by electrospinning and citric acid (CA) vapor modification has been successfully prepared and investigated. FK, poly(vinyl alcohol), and poly(ethylene oxide) have been used as raw materials and CA vapor as cross-linker. The structural, thermal, hydrophobicity, and mechanical properties of FK-based nanofibers by CA vapor modification with various cross-linking time have been completely explored. In order to investigate the effect of H2O vapor on CA vapor modification, H2O vapor modification was performed on the FK-based nanofibers at the same conditions. The results show that the average diameter of nanofibers increased from 250.83 +/- 29.65 nm to 338.79 +/- 31.43 nm by CA vapor modification with 15 h. Similarly, the thermal stability and water resistance of FK-based nanofibers by CA vapor modification have been significantly improved. The tensile strength (sigma(b)) and elongation at breakage point (epsilon(b)) of FK-based nanofibers after CA vapor modified for 15 h were about 1.5 and 2 times higher than that of nonmodified nanofibers, respectively. By comparison, scanning electron microscopy results suggest that the FK-based nanofibers modified by H2O vapor cannot maintain the morphology of the nanofibers, resulting in large-scale adhesion. The thermal properties of FK-based nanofibers with H2O vapor modification have no obvious change. The hydrophobicity and mechanical properties of FK-based nanofibers by H2O vapor modification are not as good as that of CA vapor modification. In summary, these results exhibit that nontoxic and natural CA can be used as cross-linking agent to enhance the comprehensive performance of FK-based nanofibers. This study provides a new method to modify FK-based nanofibers and refined the waste feathers, which not only protected the environment, but also gained benefits, which has a broad application prospect.

Automated summary

The waste feather keratin (FK)-based nanofibers were successfully prepared by electrospinning and citric acid (CA) vapor modification, significantly improving the thermal stability and tensile strength. The modification with CA vapor showed better performance in terms of hydrophobicity and mechanical properties compared to H2O vapor modification.