相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Crystal plasticity modeling of the cyclic behavior of polycrystalline aggregates under non-symmetric uniaxial loading: Global and local analyses
Harris Farooq et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Microstructure-sensitive critical plastic strain energy density criterion for fatigue life prediction across various loading regimes
Ritwik Bandyopadhyay et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2020)
Examining metrics for fatigue life predictions of additively manufactured IN718 via crystal plasticity modeling including the role of simulation volume and microstructural constraints
Veerappan Prithivirajan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The effect of precipitate-induced backstresses on plastic anisotropy: Demonstrated by modeling the behavior of aluminum alloy, 7085
J. J. Bhattacharyya et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
An investigation of back stress formulations under cyclic loading
S. A. E-Naaman et al.
MECHANICS OF MATERIALS (2019)
Micromechanical Modelling of the Cyclic Deformation Behavior of Martensitic SAE 4150-A Comparison of Different Kinematic Hardening Models
Benjamin J. Schaefer et al.
METALS (2019)
Exploring new links between crystal plasticity models and high-energy X-ray diffraction microscopy
Paul A. Shadea et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2019)
Crystal plasticity assessment of inclusion- and matrix-driven competing failure modes in a nickel-base superalloy
Ritwik Bandyopadhyay et al.
ACTA MATERIALIA (2019)
The dislocation configurational energy density in discrete dislocation plasticity
Zebang Zheng et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
X-ray characterization of the micromechanical response ahead of a propagating small fatigue crack in a Ni-based superalloy
Diwakar P. Naragani et al.
ACTA MATERIALIA (2019)
Microstructure and property based statistically equivalent RVEs for polycrystalline-polyphase aluminum alloys
Xiaohui Tu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior
A. Cruzado et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Cyclic plasticity experiments and polycrystal plasticity modeling of three distinct Ti alloy microstructures
B. D. Smith et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Initializing type-2 residual stresses in crystal plasticity finite element simulations utilizing high-energy diffraction microscopy data
Kartik Kapoor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Measuring Ti-7Al slip system strengths at elevated temperature using high-energy X-ray diffraction
Darren C. Pagan et al.
SCRIPTA MATERIALIA (2018)
Characterization of the crystal structure, kinematics, stresses and rotations in angular granular quartz during compaction
Ryan C. Hurley et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2018)
The role of defects and critical pore size analysis in the fatigue response of additively manufactured IN718 via crystal plasticity
Veerappan Prithivirajan et al.
MATERIALS & DESIGN (2018)
Incorporating grain-level residual stresses and validating a crystal plasticity model of a two-phase Ti-6Al-4V alloy produced via additive manufacturing
Kartik Kapoor et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
Mesoscale cyclic crystal plasticity with dislocation substructures
Gustavo M. Castelluccio et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Experimental and numerical investigation of texture evolution and the effects of intragranular backstresses in aluminum alloys subjected to large strain cyclic deformation
Waqas Muhammad et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization
A. Cruzado et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Sensitivity of polycrystal plasticity to slip system kinematic hardening laws for Al 7075-T6
Conor Hennessey et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Elastic interaction between twins during tensile deformation of austenitic stainless steel
Nicolai Ytterdal Juul et al.
SCRIPTA MATERIALIA (2016)
Towards rapid qualification of powder-bed laser additively manufactured parts
A. D. Peralta et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2016)
New opportunities for quantitative tracking of polycrystal responses in three dimensions
Jay C. Schuren et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)
A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Microstructure and mesh sensitivities of mesoscale surrogate driving force measures for transgranular fatigue cracks in polycrystals
Gustavo M. Castelluccio et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Micropolar crystal plasticity simulation of particle strengthening
J. R. Mayeur et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2015)
A rotational and axial motion system load frame insert for in situ high energy x-ray studies
Paul A. Shade et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2015)
Quantitative analysis of crystal scale deformation heterogeneity during cyclic plasticity using high-energy X-ray diffraction and finite-element simulation
Mark Obstalecki et al.
ACTA MATERIALIA (2014)
The missing term in the decomposition of finite deformation
J. D. Clayton et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
A comparison of Gurtin type and micropolar theories of generalized single crystal plasticity
J. R. Mayeur et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
A texture-based representative volume element crystal plasticity model for predicting Bauschinger effect during cyclic loading
Ling Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Mesoscale modeling of microstructurally small fatigue cracks in metallic polycrystals
Gustavo M. Castelluccio et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Connecting heterogeneous single slip to diffraction peak evolution in high-energy monochromatic X-ray experiments
Darren C. Pagan et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2014)
DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Michael A. Groeber et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)
Adaptive reconstruction method for three-dimensional orientation imaging
S. F. Li et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2013)
An evaluation of higher-order single crystal strength models for constrained thin films subjected to simple shear
J. R. Mayeur et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel
J. A. Wollmershauser et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Crystal plasticity approach for predicting the Bauschinger effect in dual-phase steels
Ji Hoon Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Quantifying the uncertainty of synchrotron-based lattice strain measurements
J. C. Schuren et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis
J. V. Bernier et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Dislocation-based micropolar single crystal plasticity: Comparison of multi- and single criterion theories
Jason R. Mayeur et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)
An energy-based microstructure model to account for fatigue scatter in polycrystals
Michael D. Sangid et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)
Simulation of slip band evolution in duplex Ti-6Al-4V
M. Zhang et al.
ACTA MATERIALIA (2010)
Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction
Jette Oddershede et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2010)
Crystal plasticity simulations of fretting of Ti-6Al-4V in partial slip regime considering effects of texture
Jason R. Mayeur et al.
COMPUTATIONAL MATERIALS SCIENCE (2008)
Analytical modelling of intragranular backstresses due to deformation induced dislocation microstructures
M. Sauzay
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Plastic behavior of a nickel-based alloy under monotonic-tension and low-cycle-fatigue loading
E-Wen Huang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Microstructure-sensitive modeling of polycrystalline IN 100
Mahesh Shenoy et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Microstructural parameters affecting creep induced load shedding in Ti-6242 by a size dependent crystal plasticity FE model
Gayathri Venkataramani et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Some links between Cosserat, strain gradient crystal plasticity and the statistical theory of dislocations
S. Forest
PHILOSOPHICAL MAGAZINE (2008)
Micro structure-based crystal plasticity modeling of cyclic deformation of Ti-6Al-4V
M. Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
A three-dimensional crystal plasticity model for duplex Ti-6Al-4V
J. R. Mayeur et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification
R. M. Suter et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2006)
A comparison of dislocation induced back stress formulations in strain gradient crystal plasticity
C. J. Bayley et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Deformation-induced long-range internal stresses and lattice plane misorientations and the role of geometrically necessary dislocations
H. Mughrabi
PHILOSOPHICAL MAGAZINE (2006)
Crystal plasticity based Fe model for understanding microstructural effects on creep and dwell fatigue in Ti-6242
Gayathri Venkataramani et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2006)
Plasticity in polycrystalline fretting fatigue contacts
CH Goh et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2006)
Non-local crystal plasticity model with intrinsic SSD and GND effects
LP Evers et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)
Scale dependent crystal plasticity framework with dislocation density and grain boundary effects
LP Evers et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)
Modeling cyclic deformation of HSLA steels using crystal plasticity
CL Xie et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2004)
Deformation and creep modeling in polycrystalline Ti-6Al alloys
V Hasija et al.
ACTA MATERIALIA (2003)
Crystallographic plasticity in fretting of Ti-6AL-4V
CH Goh et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
A multiscale multiplicative decomposition for elastoplasticity of polycrystals
JD Clayton et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
Polycrystal orientation distribution effects on microslip in high cycle fatigue
VP Bennett et al.
INTERNATIONAL JOURNAL OF FATIGUE (2003)
Strain tensor development in a single grain in the bulk of a polycrystal under loading
L Margulies et al.
ACTA MATERIALIA (2002)
Lattice incompatibility and a gradient theory of crystal plasticity
A Acharya et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)