相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。A multiscale investigation into the effect of grain size on void evolution and ductile fracture: Experiments and crystal plasticity modeling
Xiaoqing Shang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Molecular dynamics simulations on shock response and spalling behaviors of semi-coherent {111} Cu-Al multilayers
Xia Tian et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Shock-induced plasticity and damage in single-crystalline Cu at elevated temperatures by molecular dynamics simulations
Xia Tian et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Effective behaviour of porous ductile solids with a non-quadratic isotropic matrix yield surface
Lars Edvard Blystad Daehli et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2019)
Atomic-scale modeling of the void nucleation, growth, and coalescence in Al at high strain rates
Xin Yang et al.
MECHANICS OF MATERIALS (2019)
Theoretical investigations on melting/crystallization kinetics in overheated/overcooled aluminum at high pressures
Meizhen Xiang et al.
JOURNAL OF APPLIED PHYSICS (2019)
Dynamic tensile failure of rolled magnesium: Simulations and experiments quantifying the role of texture and second-phase particles
J. T. Lloyd et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Spall strength and fracture behavior of Ti-10V-2Fe-3Al alloy during one-dimensional shock loading
Yu Ren et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2018)
Shock responses of nanoporous aluminum by molecular dynamics simulations
Meizhen Xiang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
On the micromechanics of void dynamics at extreme rates
J. W. Wilkerson
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Dynamic recrystallization based ductile fracture modeling in hot working of metallic materials
Xiaoqing Shang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Shock and spall behaviors of a high specific strength steel: Effects of impact stress and microstructure
Wei Wang et al.
JOURNAL OF APPLIED PHYSICS (2017)
A dislocation-based explanation of quasi-elastic release in shock-loaded aluminum
Song-Lin Yao et al.
JOURNAL OF APPLIED PHYSICS (2017)
A dislocation-based crystal plasticity framework for dynamic ductile failure of single crystals
Thao Nguyen et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)
An improved Asay window technique for investigating the micro-spall of an explosively-driven tin
Yongtao Chen et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2017)
Shock-induced spall in single and nanocrystalline SiC
W. H. Li et al.
ACTA MATERIALIA (2017)
Generation of nanocrystalline surface layer in short pulse laser processing of metal targets under conditions of spatial confinement by solid or liquid overlayer
Maxim V. Shugaev et al.
APPLIED SURFACE SCIENCE (2017)
Failure of metals I: Brittle and ductile fracture
A. Pineau et al.
ACTA MATERIALIA (2016)
Temperature dependence of the kinetics rate of the melting and crystallization of aluminum
V. I. Mazhukin et al.
BULLETIN OF THE LEBEDEV PHYSICS INSTITUTE (2016)
Spalling behaviors of Pb induced by ramp-wave-loading: Effects of the loading rise time studied by molecular dynamics simulations
Meizhen Xiang et al.
COMPUTATIONAL MATERIALS SCIENCE (2016)
Numerical simulation of ductile fracture based on mean field homogenization method: Modeling and implementation
Meizhen Xiang et al.
ENGINEERING FRACTURE MECHANICS (2016)
Influence of impurities on the resistance to spall fracture of aluminum near the melting temperature
G. V. Garkushin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2016)
Experimental determination of the dynamic tensile strength of liquid Sn, Pb, and Zn
E. B. Zaretsky
JOURNAL OF APPLIED PHYSICS (2016)
Unraveling the Anomalous Grain Size Dependence of Cavitation
J. W. Wilkerson et al.
PHYSICAL REVIEW LETTERS (2016)
Spallation as a dominant source of pusher-fuel and hot-spot mix in inertial confinement fusion capsules
Charles D. Orth
PHYSICS OF PLASMAS (2016)
Plasticity driven growth of nanovoids and strength of aluminum at high rate tension: Molecular dynamics simulations and continuum modeling
V. S. Krasnikov et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Dynamic Strength of Tin and Lead Melts
G. I. Kanel et al.
JETP LETTERS (2015)
Modeling of ductile fragmentation that includes void interactions
J. P. Meulbroek Fick et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)
Molecular dynamics studies of the roles of microstructure and thermal effects in spallation of aluminum
Yi Liao et al.
MECHANICS OF MATERIALS (2015)
Deformation and failure of shocked bulk Cu-Nb nanolaminates
W. Z. Han et al.
ACTA MATERIALIA (2014)
Modification of Cu surface with picosecond laser pulses
J. Vincenc Obona et al.
APPLIED SURFACE SCIENCE (2014)
Simulation of shock wave propagation in single crystal and polycrystalline aluminum
J. T. Lloyd et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
A dynamic void growth model governed by dislocation kinetics
J. W. Wilkerson et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Viscoplastic constitutive theory for brittle to ductile damage in polycrystalline materials under dynamic loading
Amir Shojaei et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Spalling and melting in nanocrystalline Pb under shock loading: Molecular dynamics studies
Meizhen Xiang et al.
JOURNAL OF APPLIED PHYSICS (2013)
Molecular dynamics studies of thermal dissipation during shock induced spalling
Meizhen Xiang et al.
JOURNAL OF APPLIED PHYSICS (2013)
Response of copper to shock-wave loading at temperatures up to the melting point
E. B. Zaretsky et al.
JOURNAL OF APPLIED PHYSICS (2013)
Molecular dynamics simulations of micro-spallation of single crystal lead
Meizhen Xiang et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2013)
Elastic-plastic deformation and fracture of shock-compressed single-crystal and polycrystalline copper near melting
S. V. Razorenov et al.
TECHNICAL PHYSICS (2013)
Femtosecond laser nanostructuring of silver film
Ye Dai et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2012)
Impact response and dynamic strength of partially melted aluminum alloy
E. B. Zaretsky et al.
JOURNAL OF APPLIED PHYSICS (2012)
Experimental study of ejecta from shock melted lead
Yongtao Chen et al.
JOURNAL OF APPLIED PHYSICS (2012)
Large-scale molecular dynamics study of jet breakup and ejecta production from shock-loaded copper with a hybrid method
O. Durand et al.
JOURNAL OF APPLIED PHYSICS (2012)
Effect of temperature, strain, and strain rate on the flow stress of aluminum under shock-wave compression
E. B. Zaretsky et al.
JOURNAL OF APPLIED PHYSICS (2012)
Copper spall fracture under sub-nanosecond electron irradiation
A. E. Mayer et al.
ENGINEERING FRACTURE MECHANICS (2011)
Simulation of damage evolution in ductile metals undergoing dynamic loading conditions
Michael Bruenig et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Plastic flow in shock-loaded silver at strain rates from 104 s-1 to 107 s-1 and temperatures from 296 K to 1233 K
E. B. Zaretsky et al.
JOURNAL OF APPLIED PHYSICS (2011)
Laser shock-induced spalling and fragmentation in vanadium
H. Jarmakani et al.
ACTA MATERIALIA (2010)
Multiscale thermoelastic analysis of random heterogeneous materials Part I: Microstructure characterization and homogenization of material properties
Senthil S. Vel et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
A kinetic model of fracture of simple liquids
A. Yu. Kuksin et al.
HIGH TEMPERATURE (2010)
Continuum Models of Ductile Fracture: A Review
J. Besson
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2010)
Dynamic fragmentation of laser shock-melted tin: experiment and modelling
T. de Resseguier et al.
INTERNATIONAL JOURNAL OF FRACTURE (2010)
Dynamic fracture kinetics, influence of temperature and microstructure in the atomistic model of aluminum
Alexey Kuksin et al.
INTERNATIONAL JOURNAL OF FRACTURE (2010)
Investigation of fragments size resulting from dynamic fragmentation in melted state of laser shock-loaded tin
Loic Signor et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Theory and molecular dynamics modeling of spall fracture in liquids
A. Yu. Kuksin et al.
PHYSICAL REVIEW B (2010)
Two-temperature relaxation and melting after absorption of femtosecond laser pulse
N. A. Inogamov et al.
APPLIED SURFACE SCIENCE (2009)
Determination and interpretation of statistics of spatially resolved waveforms in spalled tantalum from 7 to 13 GPa
Michael D. Furnish et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Shock-induced spall in solid and liquid Cu at extreme strain rates
Sheng-Nian Luo et al.
JOURNAL OF APPLIED PHYSICS (2009)
Atomistic Modeling of Short Pulse Laser Ablation of Metals: Connections between Melting, Spallation, and Phase Explosion
Leonid V. Zhigilei et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2009)
Thermal Effect in Dynamic Yielding and Fracture of Metals and Alloys
A. A. Gruzdkov et al.
MATHEMATICS AND MECHANICS OF SOLIDS (2009)
Thresholds for front-side ablation and rear-side spallation of metal foil irradiated by femtosecond laser pulse
S. I. Anisimov et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2008)
Molecular dynamics study of the micro-spallation
L. Soulard
EUROPEAN PHYSICAL JOURNAL D (2008)
Probing the underlying physics of ejecta production from shocked Sn samples
M. B. Zellner et al.
JOURNAL OF APPLIED PHYSICS (2008)
Melting of Cu under hydrostatic and shock wave loading to high pressures
Qi An et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2008)
Modelling of dynamic ductile fracture and application to the simulation of plate impact tests on tantalum
C. Czarnota et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)
Heterogeneous deformation and spall of an extruded tungsten alloy: plate impact experiments and crystal plasticity modeling
T. J. Vogler et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2008)
A variational asymptotic micromechanics model for predicting thermoelastic properties of heterogeneous materials
Wenbin Yu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Melting and superheating of crystalline solids: From bulk to nanocrystals
Q. S. Mei et al.
PROGRESS IN MATERIALS SCIENCE (2007)
Spallation in laser shock-loaded tin below and just above melting on release
T. de Resseguier et al.
JOURNAL OF APPLIED PHYSICS (2007)
Effects of shock-breakout pressure on ejection of micron-scale material from shocked tin surfaces
M. B. Zellner et al.
JOURNAL OF APPLIED PHYSICS (2007)
Kinetic limit of heterogeneous melting in metals
Dmitriy S. Ivanov et al.
PHYSICAL REVIEW LETTERS (2007)
Experimental investigation of liquid spall in laser shock-loaded tin
T. de Ressguier et al.
JOURNAL OF APPLIED PHYSICS (2007)
Time-resolved dynamic tensile spall of pure aluminum under laser irradiation
Yonggang Wang et al.
JOURNAL OF APPLIED PHYSICS (2006)
Reference data for the density and viscosity of liquid aluminum and liquid iron
MJ Assael et al.
JOURNAL OF PHYSICAL AND CHEMICAL REFERENCE DATA (2006)
Piezoelectric characterization of ejecta from shocked tin surfaces
WS Vogan et al.
JOURNAL OF APPLIED PHYSICS (2005)
On the validity of the traditional measurement of spall strength
DN Chen et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2005)
A physical model for nucleation and early growth of voids in ductile materials under dynamic loading
A Molinari et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)
Atomistic modeling of shock-induced void collapse in copper -: art. no. 161902
LP Dávila et al.
APPLIED PHYSICS LETTERS (2005)
Temperature dependence of spall strength and the effect of anomalous melting temperatures in shock-wave loading
YV Petrov et al.
TECHNICAL PHYSICS (2005)
Void growth by dislocation emission
VA Lubarda et al.
ACTA MATERIALIA (2004)
Timescales in the response of materials to femtosecond laser excitation
B Rethfeld et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)
Shock-induced superheating and melting curves of geophysically important minerals
SN Luo et al.
PHYSICS OF THE EARTH AND PLANETARY INTERIORS (2004)
Micromechanical modeling of ductile damage of polycrystalline materials with heterogeneous particles
N Bonfoh et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
Maximum superheating and undercooling:: Systematics, molecular dynamics simulations, and dynamic experiments -: art. no. 134206
SN Luo et al.
PHYSICAL REVIEW B (2003)
Superheating systematics of crystalline solids
SN Luo et al.
APPLIED PHYSICS LETTERS (2003)
Linear thermoelastic higher-order theory for periodic multiphase materials
J Aboudi et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2001)
Melting mechanisms at the limit of superheating
ZH Jin et al.
PHYSICAL REVIEW LETTERS (2001)
Micromechanical modelling of porous materials under dynamic loading
A Molinari et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2001)
Dynamic yield and tensile strength of aluminum single crystals at temperatures up to the melting point
GI Kanel et al.
JOURNAL OF APPLIED PHYSICS (2001)
A unified approach for pressure and temperature effects in dynamic failure criteria
S Hanim et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2001)
High pressure melting and equation of state of aluminium
A Hänström et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2000)