相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。High-pressure shock tube study of ethanol oxidation: Ignition delay time and CO time-history measurements
Andrew R. Laich et al.
COMBUSTION AND FLAME (2020)
Tailoring the Temperature Sensitivity of Ignition Delay Times in Hot Spots Using Fuel Blends of Dimethyl Ether, Methane, and Hydrogen
J. Vinkeloe et al.
ENERGY & FUELS (2020)
Impact of shock-tube facility-dependent effects on incident- and reflected-shock conditions over a wide range of pressures and Mach numbers
Damien Nativel et al.
COMBUSTION AND FLAME (2020)
Ignition delay times of methane and hydrogen highly diluted in carbon dioxide at high pressures up to 300 atm
Jiankun Shao et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)
Shock Tube and Kinetic Study on the Effects of CO2 on Dimethyl Ether Autoignition at High Pressures
Neda Djordjevic et al.
ENERGY & FUELS (2019)
Experimental study of ethanol oxidation behind reflected shock waves: Ignition delay time and H2O laser-absorption measurements
Olivier Mathieu et al.
COMBUSTION AND FLAME (2019)
Impact of non-ideal behavior on ignition delay and chemical kinetics in high-pressure shock tube reactors
Gandhali Kogekar et al.
COMBUSTION AND FLAME (2018)
Ignition Delay Characteristics and Kinetic Investigation of Dimethyl Ether/n-Pentane Binary Mixtures: Interpreting the Effect of the Equivalence Ratio and Dimethyl Ether Blending
Xue Jiang et al.
ENERGY & FUELS (2018)
Ignition properties of lean DME/H-2 mixtures at low temperatures and elevated pressures
Zhicheng Shi et al.
FUEL (2018)
An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurements
Chong-Wen Zhou et al.
COMBUSTION AND FLAME (2018)
Shock Tube Ignition Delay Data Affected by Localized Ignition Phenomena
T. Javed et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2017)
Shock tube measurement and simulation of DME/n-butane/air mixtures: Effect of blending in the NTC region
Xue Jiang et al.
FUEL (2017)
The oxidation of 2-butene: A high pressure ignition delay, kinetic modeling study and reactivity comparison with isobutene and 1-butene
Yang Li et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2017)
Ignition delay time measurements of primary reference fuel blends
Mohammed AlAbbad et al.
COMBUSTION AND FLAME (2017)
A detailed chemical kinetic modeling, ignition delay time and jet-stirred reactor study of methanol oxidation
Ultan Burke et al.
COMBUSTION AND FLAME (2016)
A comprehensive experimental and modeling study of isobutene oxidation
Chong-Wen Zhou et al.
COMBUSTION AND FLAME (2016)
A detailed combined experimental and theoretical study on dimethyl ether/propane blended oxidation
Enoch E. Dames et al.
COMBUSTION AND FLAME (2016)
Experimental and Kinetic Modeling Study of CH3OCH3 Ignition Sensitized by NO2
W. Ye et al.
ENERGY & FUELS (2016)
An experimental and modeling study of propene oxidation. Part 2: Ignition delay time and flame speed measurements
Sinead M. Burke et al.
COMBUSTION AND FLAME (2015)
Shock-induced ignition of methane sensitized by NO2 and N2O
Olivier Mathieu et al.
COMBUSTION AND FLAME (2015)
A short reaction mechanism for the combustion of dimethyl-ether
Juan C. Prince et al.
COMBUSTION AND FLAME (2015)
An ignition delay and kinetic modeling study of methane, dimethyl ether, and their mixtures at high pressures
Ultan Burke et al.
COMBUSTION AND FLAME (2015)
Ignition Behavior of Biodiesel and Diesel under Reduced Oxygen Atmospheres
Michael P. Mayo et al.
ENERGY & FUELS (2015)
Experimental and Kinetic Study on Ignition Delay Times of Dimethyl Ether at High Temperatures
Lun Pan et al.
ENERGY & FUELS (2015)
Alternative Fuels Based on Biomass: An Experimental and Modeling Study of Ethanol Cofiring to Natural Gas
Marina Braun-Unkhoff et al.
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2015)
Experimental and kinetic study on ignition delay times of DME/H2/O2/Ar mixtures
Lun Pan et al.
COMBUSTION AND FLAME (2014)
A high pressure ignition delay time study of 2-methylfuran and tetrahydrofuran in shock tubes
Yasar Uygun et al.
COMBUSTION AND FLAME (2014)
An experimental and modeling study of propene oxidation. Part 1: Speciation measurements in jet-stirred and flow reactors
Sinead M. Burke et al.
COMBUSTION AND FLAME (2014)
ON THE RATIONAL INTERPRETATION OF DATA ON LAMINAR FLAME SPEEDS AND IGNITION DELAY TIMES
Chung K. Law et al.
COMBUSTION SCIENCE AND TECHNOLOGY (2014)
Shock Tube Measurements and Modeling Study on the Ignition Delay Times of n-Butanol/Dimethyl Ether Mixtures
Zhuang Geng et al.
ENERGY & FUELS (2014)
Shock-Tube Measurements and Kinetic Modeling Study of Methyl Propanoate Ignition
Zihang Zhang et al.
ENERGY & FUELS (2014)
Effect of pressure and equivalence ratio on the ignition characteristics of dimethyl ether-hydrogen mixtures
Lun Pan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2014)
The Importance of Detailed Chemical Mechanisms in Gas Turbine Combustion Simulations
M. Braun-Unkhoff et al.
EURASIAN CHEMICO-TECHNOLOGICAL JOURNAL (2014)
An experimental and detailed chemical kinetic modeling study of hydrogen and syngas mixture oxidation at elevated pressures
Alan Keromnes et al.
COMBUSTION AND FLAME (2013)
Experimental and Kinetic Studies on Ignition Delay Times of Dimethyl Ether/n-Butane/O2/Ar Mixtures
Erjiang Hu et al.
ENERGY & FUELS (2013)
Shock Tube Measurements and Kinetic Study on Ignition Delay Times of Lean DME/n-Butane Blends at Elevated Pressures
Xue Jiang et al.
ENERGY & FUELS (2013)
Shock-Tube Measurements of Ignition Delay Times for the Ethane/Dimethyl Ether Blends
Jiaxiang Zhang et al.
ENERGY & FUELS (2013)
Experimental and Modeling Study on Ignition Delay Times of Dimethyl Ether/Propane/Oxygen/Argon Mixtures at 20 bar
Erjiang Hu et al.
ENERGY & FUELS (2013)
Dimethyl Ether Autoignition at Engine-Relevant Conditions
Zhenhua Li et al.
ENERGY & FUELS (2013)
A Hierarchical and Comparative Kinetic Modeling Study of C1 - C2 Hydrocarbon and Oxygenated Fuels
Wayne K. Metcalfe et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2013)
Autoignition of surrogate biodiesel fuel (B30) at high pressures: Experimental and modeling kinetic study
Helena Patricia Ramirez Lancheros et al.
COMBUSTION AND FLAME (2012)
Shock Tube Measurements and Kinetic Investigation on the Ignition Delay Times of Methane/Dimethyl Ether Mixtures
Chenglong Tang et al.
ENERGY & FUELS (2012)
The autoignition of practical fuels at HCCI conditions: High-pressure shock tube experiments and phenomenological modeling
A. Vandersickel et al.
FUEL (2012)
Role of peroxy chemistry in the high-pressure ignition of n-butanol - Experiments and detailed kinetic modelling
S. Vranckx et al.
COMBUSTION AND FLAME (2011)
Measurement and Chemical Kinetics Modeling of Shock-Induced Ignition of Ethanol-Air Mixtures
L. R. Cancino et al.
ENERGY & FUELS (2010)
Chemical-Kinetic Modeling of Ignition Delay: Considerations in Interpreting Shock Tube Data
Marcos Chaos et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2010)
Determination of ignition delay times of different hydrocarbons in a new high pressure shock tube
K. A. Heufer et al.
SHOCK WAVES (2010)
Shock tube measurements of ignition delay times and OH time-histories in dimethyl ether oxidation
R. D. Cook et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)
Contact surface tailoring condition for shock tubes with different driver and driven section diameters
Zekai Hong et al.
SHOCK WAVES (2009)
Spectroscopic and chemical-kinetic analysis of the phases of HCCI autoignition and combustion for single- and two-stage ignition fuels
Wontae Hwang et al.
COMBUSTION AND FLAME (2008)
A shock tube study of iso-octane ignition at elevated pressures: The influence of diluent gases
Hsi-Ping S. Shen et al.
COMBUSTION AND FLAME (2008)
The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines: A review
Constantine Arcoumanis et al.
FUEL (2008)
Dimethyl ether autoignition in a rapid compression machine: Experiments and chemical kinetic modeling
Gaurav Mittal et al.
FUEL PROCESSING TECHNOLOGY (2008)
A simple reactive gasdynamic model for the computation of gas temperature and species concentrations behind reflected shock waves
H. Li et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2008)
Thermal decomposition reaction and a comprehensive kinetic model of dimethyl ether
Zhenwei Zhao et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2008)
Autoignition of surrogate fuels at elevated temperatures and pressures
A. J. Dean et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2007)
Test-time extension behind reflected shock waves using CO2-He and C3H8-He driver mixtures
Anthony R. Amadio et al.
SHOCK WAVES (2006)
A facility for gas- and condensed-phase measurements behind shock waves
EL Petersen et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2005)
Interpreting shock tube ignition data
DF Davidson et al.
INTERNATIONAL JOURNAL OF CHEMICAL KINETICS (2004)
Shock tube measurements of iso-octane ignition times and OH concentration time histories
DF Davidson et al.
PROCEEDINGS OF THE COMBUSTION INSTITUTE (2002)
Nonideal effects behind reflected shock waves in a high-pressure shock tube
EL Petersen et al.
SHOCK WAVES (2001)
Experimental and modeling study of premixed atmospheric-pressure dimethyl ether-air flames
EW Kaiser et al.
JOURNAL OF PHYSICAL CHEMISTRY A (2000)