相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。From bulk to porous structures: Tailoring monoclinic SrAl2Si2O8 ceramic by geopolymer precursor technique
Shengjian Zhao et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)
Porosity, mechanical strength and structure of waste-based geopolymer foams by different stabilizing agents
Zehua Ji et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Highly porous cordierite ceramics from engineered basic activation of metakaolin/talc aqueous suspensions
Acacio Rincon Romero et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Bibliographic and visualized analysis of geopolymer research and its application in heavy metal immobilization: A review
Zehua Ji et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)
High strength/density ratio in a syntactic foam made from one-part mix geopolymer and cenospheres
Ailar Hajimohammadi et al.
COMPOSITES PART B-ENGINEERING (2019)
Green synthesis of high porosity waste gangue microsphere/geopolymer composite foams via hydrogen peroxide modification
Shu Yan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Si3N4 Hollow Microsphere Toughened Porous Ceramics from Direct Coagulation Method via Dispersant Reaction
Xiaoyan Zhang et al.
ADVANCED ENGINEERING MATERIALS (2019)
Design of lightweight metakaolin based geopolymer foamed with hydrogen peroxide
Svetlana Petlitckaia et al.
CERAMICS INTERNATIONAL (2019)
Waste-to-resource preparation of glass-containing foams from geopolymers
Chengying Bai et al.
CERAMICS INTERNATIONAL (2019)
Highly porous mullite ceramics from engineered alkali activated suspensions
Acacio Rincon Romero et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)
Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes
Tao Yang et al.
CEMENT AND CONCRETE RESEARCH (2018)
Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms
Vincent Cantarel et al.
CERAMICS INTERNATIONAL (2018)
Low-temperature fabrication of SiC/geopolymer cellular composites
Chengying Bai et al.
COMPOSITES PART B-ENGINEERING (2018)
Mechanical properties and microstructure of ultra-lightweight cement composites with fly ash cenospheres after exposure to high temperatures
Zhenyu Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Fabrication of hollow microspheres filled fly ash based foam geopolymers with ultra-low thermal conductivity and relative high strength
Ning-ning Shao et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Formation mechanism of high apparent porosity ceramics prepared from fly ash cenosphere
Feng Jiang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Functional glass-ceramic foams from 'inorganic gel casting' and sintering of glass/slag mixtures
Acacio Rincon et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Fly ash based geopolymeric foams using silica fume as pore generation agent. Physical, mechanical and acoustic properties
Y. Luna-Galiano et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)
Carbon fiber waste incorporation in blast furnace slag geopolymer-composites
Y. Luna-Galiano et al.
MATERIALS LETTERS (2018)
Fabrication and characterization of thermally-insulating coconut ash-based geopolymer foam
Hassan Soltan Hassan et al.
WASTE MANAGEMENT (2018)
Preparation of NaA zeolite spheres from geopolymer gels using a one-step method in silicone oil
Zi-han Liu et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2017)
In situ processing of MWCNTs/leucite composites through geopolymer precursor
Jingkun Yuan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Open-cell phosphate-based geopolymer foams by frothing
Chengying Bai et al.
MATERIALS LETTERS (2017)
Experimental and numerical investigation of influence of air-voids on the compressive behaviour of foamed concrete
Thang T. Nguyen et al.
MATERIALS & DESIGN (2017)
Pore characteristics in one-part mix geopolymers foamed by H2O2: The impact of mix design
Ailar Hajimohammadi et al.
MATERIALS & DESIGN (2017)
Preparation of ultra-light ceramic foams from waste glass and fly ash
Haihui Mi et al.
ADVANCES IN APPLIED CERAMICS (2017)
Steel fiber reinforced geopolymer matrix (S-FRGM) composites applied to reinforced concrete structures for strengthening applications: A preliminary study
Lorenza Carabba et al.
COMPOSITES PART B-ENGINEERING (2017)
Lightweight geopolymer-based hybrid materials
Giuseppina Roviello et al.
COMPOSITES PART B-ENGINEERING (2017)
The influence of the stabilizing agent SDS on porosity development in alkali-activated fly-ash based foams
L. Korat et al.
CEMENT & CONCRETE COMPOSITES (2017)
Applications of hierarchically structured porous materials from energy storage and conversion, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine
Ming-Hui Sun et al.
CHEMICAL SOCIETY REVIEWS (2016)
In Situ Processing of Graphene/Leucite Nanocomposite Through Graphene Oxide/Geopolymer
Shu Yan et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents
V. Ducman et al.
MATERIALS CHARACTERIZATION (2016)
Compressive behaviour of sodium and potassium activators synthetized fly ash geopolymer at elevated temperatures: A comparative study
Anwar Hosan et al.
JOURNAL OF BUILDING ENGINEERING (2016)
Thermal insulation and thermally resistant materials made of geopolymer foams
Michal Lach et al.
ECOLOGY AND NEW BUILDING MATERIALS AND PRODUCTS 2016 (2016)
Mechanical, thermal insulation, thermal resistance and acoustic absorption properties of geopolymer foam concrete
Zuhua Zhang et al.
CEMENT & CONCRETE COMPOSITES (2015)
Enhanced properties of graphene/fly ash geopolymeric composite cement
Mohamed Saafi et al.
CEMENT AND CONCRETE RESEARCH (2015)
Preparation of fully stabilized cubic-leucite composite through heat-treating Cs-substituted K-geopolymer composite at high temperatures
Peigang He et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2015)
Enhanced thermal shock resistance of ultra-high temperature ceramic by biomimetic surface modification
Baoxi Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Characterisation of mechanical and thermal properties in flax fabric reinforced geopolymer composites
Hasan Assaedi et al.
JOURNAL OF ADVANCED CERAMICS (2015)
Production of geopolymer composites enhanced by nano-kaolin material
Mahmoud M. Hassaan et al.
JOURNAL OF ADVANCED CERAMICS (2015)
Synthesis of Hierarchical Micro/Mesoporous Structures via Solid-Aqueous Interface Growth: Zeolitic Imidazolate Framework-8 on Siliceous Mesocellular Foams for Enhanced Pervaporation of Water/Ethanol Mixtures
Yu-Chain Sue et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
A comparison between different foaming methods for the synthesis of light weight geopolymers
Giulia Masi et al.
CERAMICS INTERNATIONAL (2014)
Effect of process parameters on the physical properties of porous geopolymers obtained by gelcasting
Marcelo Strozi Cilla et al.
CERAMICS INTERNATIONAL (2014)
Geopolymer foam concrete: An emerging material for sustainable construction
Zuhua Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Interface evolution of the Cf/leucite composites derived from Cf/geopolymer composites
Peigang He et al.
CERAMICS INTERNATIONAL (2013)
Multifunctional properties of carbon nanotube/fly ash geopolymeric nanocomposites
Mohamed Saafi et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Thermal evolution and crystallization kinetics of potassium-based geopolymer
Peigang He et al.
CERAMICS INTERNATIONAL (2011)
Microstructural and mechanical characterization of fly ash cenosphere/metakaolin-based geopolymeric composites
Mei-Rong Wang et al.
CERAMICS INTERNATIONAL (2011)
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
Benjamin C. McLellan et al.
JOURNAL OF CLEANER PRODUCTION (2011)
Structural, thermal, mechanical and dynamic mechanical properties of cenosphere filled polypropylene composites
Arijit Das et al.
MATERIALS & DESIGN (2011)
Effect of cesium substitution on the thermal evolution and ceramics formation of potassium-based geopolymer
Peigang He et al.
CERAMICS INTERNATIONAL (2010)
Effect of coupling agent on mechanical properties of hollow carbon microsphere/phenolic resin syntactic foam
Liying Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Mechanical and thermal characteristics of high density polyethylene-fly ash Cenospheres composites
M. V. Deepthi et al.
MATERIALS & DESIGN (2010)
Characterisation and use of biomass fly ash in cement-based materials
Rejini Rajamma et al.
JOURNAL OF HAZARDOUS MATERIALS (2009)
Formation of Ceramics from Metakaolin-Based Geopolymers. Part II: K-Based Geopolymer
Jonathan L. Bell et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Formation of Ceramics from Metakaolin-Based Geopolymers: Part I - Cs-Based Geopolymer
Jonathan L. Bell et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Characterization of porous silicon nitride ceramics by pressureless sintering using fly ash cenosphere as a pore-forming agent
Yingfeng Shao et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2009)
Preparation of magnetic ZSM-5/Ni/fly-ash hollow microspheres using fly-ash cenospheres as the template
Huiqing Tao et al.
MATERIALS LETTERS (2009)
Effects of the Al content on pore structures of porous Ti-Al alloys
Y. Jiang et al.
INTERMETALLICS (2008)
Nano-toughening versus micro-toughening of polymer syntactic foams
E. M. Wouterson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Synthesis and mechanical properties of metakaolinite-based geopolymer
HL Wang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)
Conversion of fly ash cenosphere to hollow microspheres with zeolite/mullite composite shells
DJ Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2003)
Characteristics and properties of lightweight concrete manufactured with cenospheres
F Blanco et al.
CEMENT AND CONCRETE RESEARCH (2000)