期刊
FUEL
卷 283, 期 -, 页码 -出版社
ELSEVIER SCI LTD
DOI: 10.1016/j.fuel.2020.119324
关键词
Marine diesel injector; Geometry parameters; Flow characteristics; Cavitation; CFD
资金
- National Natural Science Foundation of China [51776088]
- National Key Research and Development Project of China [2019YFB1504004]
- Priority Academic Program Development of Jiangsu High Education Institutions
- High-tech Research Key laboratory of Zhenjiang [SS2018002]
- Research Innovation Plan for Postgraduates in Jiangsu Universities of China [KYCX20_3023]
The study shows that asymmetric structural characteristics of the nozzle significantly influence the interior flow, with larger diameter leading to higher mass flow rates and flow discharge coefficients. The concave sphere shapes connecting the injector body and the holes help reduce the negative effects of eccentric holes. Different hole scales and shapes result in different flow phenomena.
Cavitating flow potentially emerging in diesel injector nozzles plays a prominent role influencing the subsequent process of spray atomization and combustion reaction. A computational study is conducted to investigate influences of asymmetric structural characteristics on interior nozzle flow in a multi-hole marine low-speed diesel injector. The simulation results illustrate that both mass flow rates and flow discharge coefficients of two holes on both sides are larger than those of two holes in the middle with increasing hole entrance corner radius (R), hole diameter (D) and hole length. The concave sphere shapes connecting the injector body and the holes are beneficial to reduce the negative effect of eccentric holes and bring about different flow patterns. R/D has a significant effect on the flow discharge coefficient but little influence on the mass flow rate. Besides, the hole entrance corner radius of 0.10 mm is an appropriate option to ensure the consistency of injections. The increasing hole length is conducive to the development of geometry-induced cavitation and vortex-induced cavitation. The development trends of flow phenomena in all holes are different with various hole taper degrees. It suggests that multi-hole marine diesel injectors with K-factor of 1 similar to 2.5 can be considered in the actual manufacture.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据