相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Thickness effect on the mode III fracture resistance and fracture path of rock using ENDB specimens
Jamal Bidadi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Evaluation of temperature and loading rate effect on fracture toughness of fiber reinforced asphalt mixture using edge notched disc bend (ENDB) specimen
Hamed Motamedi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Heterogeneity effects on mixed-mode I/II stress intensity factors and fracture path of laboratory asphalt mixtures in the shape of SCB specimen
M. R. M. Aliha et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Modes I and II stress intensity factors of semi-circular bend specimen computed for two-phase aggregate/mastic asphalt mixtures
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Fracture resistance study for hot mix asphalt mixture under out of plane sliding mode
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2020)
An extended edge-notched disc bend (ENDB) specimen for mixed-mode I plus II fracture assessments
A. Bahmani et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Effect of bitumen type, temperature and aging on mixed I/II fracture toughness of asphalt binders-experimental and theoretical assessment
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Impact of freeze-thaw cycles on low temperature mixed mode I/II cracking properties of water saturated hot mix asphalt: An experimental study
Mansour Fakhri et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Low temperature fracture toughness study for bitumen under mixed mode I plus II loading condition
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2019)
The effect of ENDB specimen geometry on mode I fracture toughness and fracture energy of HMA and SMA mixtures at low temperatures
M. R. Eghbali et al.
ENGINEERING FRACTURE MECHANICS (2019)
Aging effect on combined mode fracture resistance of bitumen
Saied Shaker et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results - A statistical analysis
H. R. Fattahi Amirdehi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
An insight into mode II fracture toughness testing using SCB specimen
Bahador Bahrami et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
Crack initiation angles and propagation paths in polyurethane foams under mixed modes I/II and I/III loading
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion
A. R. Torabi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens
S. M. J. Razavi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Effect of specimen thickness on the fracture resistance of hot mix asphalt in the disk-shaped compact tension (DCT) configuration
Calvin M. Stewart et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology
H. Rooholamini et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement
Ahmad Mansourian et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Evaluating mode I fracture resistance in asphalt mixtures using edge notched disc bend ENDB specimen with different geometrical and environmental conditions
P. J. Haghighat Pour et al.
ENGINEERING FRACTURE MECHANICS (2018)
Mixed mode tensile - In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions
M. Fakhri et al.
ENGINEERING FRACTURE MECHANICS (2018)
EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials
M. M. Mirsayar et al.
ENGINEERING FRACTURE MECHANICS (2018)
Fracture properties of hybrid fibre-reinforced roller-compacted concrete in mode I with consideration of possible kinked crack
H. Rooholamini et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents
M. R. M. Aliha et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Fracture prediction of rocks under mode I and mode II loading using the generalized maximum tangential strain criterion
Ming-Dong Wei et al.
ENGINEERING FRACTURE MECHANICS (2017)
Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber
Mansour Fakhri et al.
ENGINEERING FRACTURE MECHANICS (2017)
On the low temperature mixed mode fracture analysis of asphalt binder - Theories and experiments
M. M. Mirsayar
ENGINEERING FRACTURE MECHANICS (2017)
Analyzing of Wedge Splitting Test on Asphalt Pavement Using Optical Measurements
A. Jamaaoui et al.
JOURNAL OF TESTING AND EVALUATION (2017)
Mixed Mode I/II Fracture Investigation of Perspex Based on the Averaged Strain Energy Density Criterion
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2017)
Mixed Mode I/II Fracture Investigation of Perspex Based on the Averaged Strain Energy Density Criterion
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2017)
Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Evaluation of low temperature properties of rubberized asphalt mixtures
Marek Pszczola et al.
MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (2017)
Strain-based criteria for mixed-mode fracture of polycrystalline graphite
M. M. Mirsayar et al.
ENGINEERING FRACTURE MECHANICS (2016)
Mixed mode fracture toughness testing of PMMA with different three-point bend type specimens
M. R. M. Aliha et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)
Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes
M. Ameri et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
A novel test specimen for investigating the mixed mode I plus III fracture toughness of hot mix asphalt composites - Experimental and theoretical study
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Characterization of Low Temperature Crack Resistance of Crumb Rubber Modified Asphalt Mixtures Using Semi-Circular Bending Tests
Hainian Wang et al.
JOURNAL OF TESTING AND EVALUATION (2016)
Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Shear and mode II fracture of PUR foams
Liviu Marsavina et al.
ENGINEERING FAILURE ANALYSIS (2015)
A generalized strain energy density criterion for mixed mode fracture analysis in brittle and quasi-brittle materials
M. R. Ayatollahi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
Determination of mode III fracture toughness for different materials using a new designed test configuration
M. R. M. Aliha et al.
MATERIALS & DESIGN (2015)
Mixed mode fracture analysis using extended maximum tangential strain criterion
M. M. Mirsayar
MATERIALS & DESIGN (2015)
Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading - A statistical approach
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Effect of load application rate and temperature on the fracture energy of asphalt mixtures. Fenix and semi-circular bending tests
Felix Perez-Jimenez et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Investigation of Mixed Mode I/II Brittle Fracture Using ASCB Specimen
Radu Negru et al.
INTERNATIONAL JOURNAL OF FRACTURE (2013)
Modeling Mode I Fracture of Bitumen Films
O. Portillo et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)
Mixed mode fracture resistance of asphalt concrete mixtures
M. Ameni et al.
ENGINEERING FRACTURE MECHANICS (2012)
Laboratory Mixed-Mode Cracking of Asphalt Concrete Using the Single-Edge Notch Beam
Andrew Braham et al.
Road Materials and Pavement Design (2012)
An improved semi-circular bend specimen for investigating mixed mode brittle fracture
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2011)
Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2010)
Using Semi Circular Bending Test to Evaluate Low Temperature Fracture Resistance for Asphalt Concrete
X-J Li et al.
EXPERIMENTAL MECHANICS (2010)
Brittle fracture evaluation of a fine grain cement mortar in combined tensile-shear deformation
M. R. M. Aliha et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Mode II Brittle Fracture Assessment Using ASFPB Specimen
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF FRACTURE (2009)
Micromechanical fracture modeling of asphalt concrete using a single-edge notched beam test
H. Kim et al.
MATERIALS AND STRUCTURES (2009)
Effect of Factors Affecting Fracture Energy of Asphalt Concrete at Low Temperature
Xinjun Li et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2008)
On determination of mode II fracture toughness using semi-circular bend specimen
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
A comparison between beam and semi-circular bending fracture tests for asphalt
Ignacio Artamendi et al.
ROAD MATERIALS AND PAVEMENT DESIGN (2006)
Cracked Brazilian disc specimen subjected to mode II deformation
MR Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2005)
Fracture tests on bitumen films
JAF Harvey et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2005)
Fracture toughness of polymer-modified asphalt concrete at low temperatures
KW Kim et al.
CANADIAN JOURNAL OF CIVIL ENGINEERING (2003)
The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading
DJ Smith et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2001)
分享论文
