4.4 Review

Characteristics of PM and soot emissions of internal combustion engines running on biomass-derived DMF biofuel: a review

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Experimental research on ethyl acetate as novel oxygenated fuel in the spark-ignition (SI) engine

Abdulvahap Cakmak et al.

Summary: This experimental research investigates the effects of adding ethyl acetate, a new and renewable oxygenated fuel, to gasoline on engine performance and exhaust emissions. The results show that ethyl acetate blends have advantages in reducing CO and HC emissions, but lead to a dramatic increase in NOX emissions and a deterioration in engine performance. Fuel cost analysis also reveals that ethyl acetate blends have higher fuel costs compared to gasoline.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2023)

Review Energy & Fuels

A review on ignition delay times of 2,5-Dimethylfuran

Trung Thanh Bui et al.

Summary: This review paper thoroughly analyzes the ignition behavior of DMF and compares it with other promising fuels, suggesting that DMF could potentially be used as a fuel for spark-ignition engines. However, further comprehensive and detailed research on the use of DMF as a fuel is needed.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2022)

Article Energy & Fuels

Characterization of bioethanol obtained from Eichhornia Crassipes plant; its emission and performance analysis on CI engine

Osama Khan et al.

Summary: In this study, bioethanol was produced from Eichhornia crassipes plant and tested in a diesel engine to understand its potential as a fuel. Blending bioethanol from Eichhornia crassipes with diesel resulted in improved engine parameters, with a 10% blend standing out for enhanced brake power and efficiency. Emission levels like CO and unburned HC were lower in the 10% blend compared to other blends, except for NOx emissions, which depended on the engine construction.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Article Engineering, Marine

Prediction of the density and viscosity of biodiesel and the influence of biodiesel properties on a diesel engine fuel supply system

Anh Tuan Hoang

Summary: The study demonstrated significant effects of varying biodiesel fractions and temperature on the dynamic viscosity and density of the fuel, as well as their impact on the fuel system, pump network, fuel filters, and spray characteristics. Results showed a 95% confidence level in the regression correlation equation regarding kinematic viscosity and density.

JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY (2021)

Review Energy & Fuels

A Review on the Performance, Combustion, and Emission Characteristics of Spark-Ignition Engine Fueled With 2,5-Dimethylfuran Compared to Ethanol and Gasoline

Danh Chan Nguyen et al.

Summary: The global concerns over diminishing fossil fuel reserves and climate change have led to a search for renewable and green energy sources like 2,5-dimethylfuran (DMF). DMF shows promise as a clean source of liquid transportation biofuel, but further research and optimization are needed before large-scale commercialization.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Review Energy & Fuels

Flame Characteristics and Ignition Delay Times of 2,5-Dimethylfuran: A Systematic Review With Comparative Analysis

Van Vang Le et al.

Summary: The global push for renewable and carbon-neutral biofuels in response to concerns about CO2 levels, energy security, and fossil fuel depletion has led to the investigation of 2,5-dimethylfuran (DMF) as a promising alternative. This study critically reviewed the laminar flame characteristics, flame instabilities, and ignition delay times of DMF, suggesting its potential use as a fuel for spark ignition engines. Further experimental studies on real engines fueled with DMF are needed for a comprehensive evaluation of this biofuel.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2021)

Article Engineering, Environmental

Soft computing-based modeling and emission control/reduction of a diesel engine fueled with carbon nanoparticle-dosed water/diesel emulsion fuel

Peyman Atarod et al.

Summary: This study modeled and optimized the performance and emission characteristics of a diesel engine fueled with carbon nanoparticle-dosed water/diesel emulsion fuel using soft computing techniques. The system accurately predicted output parameters and identified optimal operating conditions.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Environmental Sciences

A state-of-the-art review on emission characteristics of SI and CI engines fueled with 2,5-dimethylfuran biofuel

Anh Tuan Hoang et al.

Summary: The text discusses the strategies for sustainable energy development in response to declining fossil fuel resources and increasing vehicle emissions, with a focus on the potential of 2,5-dimethylfuran (DMF) as a promising fuel source. However, it also points out the need for further investigation into the emissions characteristics and impact of DMF on engine durability and fuel systems to provide a comprehensive analysis of this biofuel class.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

Review Green & Sustainable Science & Technology

Rice bran oil-based biodiesel as a promising renewable fuel alternative to petrodiesel: A review

Anh Tuan Hoang et al.

Summary: The article explores the production of biofuels from free fatty acid-rich rice bran oil and evaluates its application in diesel engines in terms of effectiveness and economic feasibility. Research suggests that a blend of 20% rice bran oil biodiesel and 80% petrodiesel is the most optimal composition considering both technical and economic aspects.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Review Energy & Fuels

Combustion and emission characteristics of spark and compression ignition engine fueled with 2,5-dimethylfuran (DMF): A comprehensive review

Anh Tuan Hoang et al.

Summary: This paper discusses the production process and properties of DMF derived from biomass, as well as the oxidation, pyrolysis mechanisms, and combustion characteristics of DMF in engines. DMF could potentially become a fuel for both SI and CI engines, but optimization of the production process is necessary before application.
Review Energy & Fuels

Synthesis pathway and combustion mechanism of a sustainable biofuel 2,5-Dimethylfuran: Progress and prospective

Anh Tuan Hoang et al.

Summary: In recent years, 2,5-Dimethylfuran (DMF) has been identified as a promising new biofuel that is synthesized from renewable lignocellulosic biomass. Research has focused on synthesis pathways, decomposition mechanisms, combustion characteristics, and production strategies for commercialization. Further investigations are needed to understand the combustion and emission formation characteristics of using DMF in engines.
Review Energy & Fuels

Prospective review on the application of biofuel 2,5-dimethylfuran to diesel engine

Anh Tuan Hoang et al.

Summary: The paper provides a comprehensive analysis of the catalyst-based synthesis of DMF from lignocellulosic biomass and evaluates the performance and emission characteristics of diesel engines fueled with DMF in comparison to diesel fuel. The study found that the engine performance with a blend of 10%v/v of DMF in diesel fuel was similar to that of pure diesel, with improved emissions of PM, NOx, CO, and HC but increased soot tendency due to the aromatic ring content of DMF.

JOURNAL OF THE ENERGY INSTITUTE (2021)

Review Engineering, Electrical & Electronic

The electric propulsion system as a green solution for management strategy ofCO2emission in ocean shipping: A comprehensive review

Hoang Phuong Nguyen et al.

Summary: This paper discusses the importance of selecting and optimizing propulsion architecture when designing modern commercial ships, as well as the challenges faced in the process. It also highlights the benefits brought to ship owners by electrical and hybrid electric propulsion systems in recent years. The authors provide a detailed comparison and analysis of optimizing the choice of electric or hybrid powertrain systems for commercial fleets, and propose strategies for the development of sustainable maritime transport.

INTERNATIONAL TRANSACTIONS ON ELECTRICAL ENERGY SYSTEMS (2021)

Review Energy & Fuels

Effects of injection pressure on the NOx and PM emission control of diesel engine: A review under the aspect of PCCI combustion condition

Dao Nam Cao et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

Article Energy & Fuels

A study of emission characteristic, deposits, and lubrication oil degradation of a diesel engine running on preheated vegetable oil and diesel oil

Anh Tuan Hoang et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)

Article Energy & Fuels

Effects of different diesel particulate filter on emission characteristics of in-use diesel vehicles

Jiachen Li et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)

Article Green & Sustainable Science & Technology

Continuous condensed-phase ethanol conversion to higher alcohols: Experimental results and techno-economic analysis

Iman Nezam et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Article Chemistry, Physical

Pyrolysis of Furan and Its Methylated Derivatives: A Shock-Tube/TOF-MS and Modeling Study

Lena Weiser et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2019)

Review Green & Sustainable Science & Technology

Recent advances in catalytic transformation of biomass-derived 5-hydroxymethylfurfural into the innovative fuels and chemicals

Lei Hu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Environmental Sciences

Effects of oxygenated fuels on the particle-phase compounds emitted from a diesel engine

Chun Guan et al.

ATMOSPHERIC POLLUTION RESEARCH (2017)

Article Thermodynamics

Influence of the Temperature and 2,5-Dimethylfuran Concentration on Its Sooting Tendency

Katiuska Alexandrino et al.

COMBUSTION SCIENCE AND TECHNOLOGY (2016)

Article Thermodynamics

Importance of detailed chemical kinetics on combustion and soot modelling of ventilated and under-ventilated fires in compartment

A. C. Y. Yuen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Article Agricultural Engineering

Second-Generation Biofuels: Why They are Taking so Long

Daniel J. M. Hayes

ADVANCES IN BIOENERGY: THE SUSTAINABILITY CHALLENGE (2016)

Review Energy & Fuels

Recent updates on lignocellulosic biomass derived ethanol - A review

Rajeev Kumar et al.

BIOFUEL RESEARCH JOURNAL-BRJ (2016)

Article Energy & Fuels

A Soot Precursor Formation Embedded Reaction Mechanism of Diesel Surrogate Fuel

F. Wang et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2015)

Article Thermodynamics

Effect of furans on particle formation in diffusion flames: An experimental and modeling study

Mariano Sirignano et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)

Article Thermodynamics

Influence of substituted furans on the formation of Polycyclic Aromatic Hydrocarbons in flames

Luc-Sy Tran et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2015)

Review Green & Sustainable Science & Technology

Recent progress in the development of biofuel 2,5-dimethylfuran

Yong Qian et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Article Thermodynamics

PRIMARY COMBUSTION INTERMEDIATES IN LOW-PRESSURE PREMIXED LAMINAR 2,5-DIMETHYLFURAN/OXYGEN/ARGON FLAMES

Lixia Wei et al.

COMBUSTION SCIENCE AND TECHNOLOGY (2014)

Article Energy & Fuels

Interaction between 2,5-Dimethylfuran and Nitric Oxide: Experimental and Modeling Study

Katiuska Alexandrino et al.

ENERGY & FUELS (2014)

Review Chemistry, Multidisciplinary

Advances in 5-hydroxymethylfurfural production from biomass in biphasic solvents

Basudeb Saha et al.

GREEN CHEMISTRY (2014)

Proceedings Paper Thermodynamics

Lignin as co-product of second generation bioethanol production from ligno-cellulosic biomass

Franco Cotana et al.

ATI 2013 - 68TH CONFERENCE OF THE ITALIAN THERMAL MACHINES ENGINEERING ASSOCIATION (2014)

Article Chemistry, Physical

Shock Tube and Chemical Kinetic Modeling Study of the Oxidation of 2,5-Dimethylfuran

Baptiste Sirjean et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2013)

Review Energy & Fuels

Second-generation biofuels: why they are taking so long

Daniel J. M. Hayes

WILEY INTERDISCIPLINARY REVIEWS-ENERGY AND ENVIRONMENT (2013)

Article Chemistry, Multidisciplinary

Deoxygenation of Biomass-Derived Feedstocks: Hurdles and Opportunities

Saikat Dutta

CHEMSUSCHEM (2012)

Article Thermodynamics

Autoignition quality of gasoline fuels in partially premixed combustion in diesel engines

G. T. Kalghatgi et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2011)

Article Thermodynamics

Biomasses pyrolysis and combustion kinetics through n-th order parallel reactions

Juan A. Conesa et al.

THERMOCHIMICA ACTA (2011)

Article Chemistry, Physical

Formation Enthalpies and Bond Dissociation Energies of Alkylfurans. The Strongest C-X Bonds Known?

John M. Simmie et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2009)

Article Thermodynamics

Sooting tendencies of nonvolatile aromatic hydrocarbons

Charles S. McEnally et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2009)

Article Thermodynamics

Structural group analysis for soot reduction tendency of oxygenated fuels

P. Pepiot-Desjardins et al.

COMBUSTION AND FLAME (2008)

Article Energy & Fuels

Novel micropyrolyis index (MPI) to estimate the sooting tendency of fuels

Steven P. Crossley et al.

ENERGY & FUELS (2008)

Article Engineering, Environmental

Nucleation mode particles with a nonvolatile core in the exhaust of a heavy duty diesel vehicle

Topi Ronkko et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2007)