相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Hot corrosion behavior and wettability of calcium-magnesium-alumina-silicate (CMAS) on LaTi2Al9O19 ceramic
Weiwei Qu et al.
CORROSION SCIENCE (2020)
The corrosion behaviors of thermal barrier material of M-YTaO4 attacked by CMAS at 1250 °C
Wenqi Yang et al.
CERAMICS INTERNATIONAL (2020)
Infiltration mechanism of Ca-Mg-Al-silicate (CMAS) melt on Yttria stabilized zirconia (YSZ) columnar crystal at high temperature: First-principles research
Peifeng Zhou et al.
APPLIED SURFACE SCIENCE (2020)
Investigation of CMAS resistance of sacrificial plasma-sprayed mullite-YSZ protective layer on 8YSZ thermal barrier coating
Huanjie Fang et al.
CORROSION SCIENCE (2020)
CaO-MgO-Al2O3-SiO2 corrosion behavior of air-plasma-sprayed (LaxYb1-x)2Zr2O7
Min Wang et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)
Diffusion characteristics and structural stability of Pt modified β-NiAl/γ′-Ni3Al within NiCoCrAl alloy at high temperature
Asim Khan et al.
APPLIED SURFACE SCIENCE (2019)
Corrosion behavior of Sc2O3-Y2O3 co-stabilized ZrO2 thermal barrier coatings with CMAS attack
W. Fan et al.
CERAMICS INTERNATIONAL (2019)
CMAS corrosion resistance in high temperature and rainwater environment of double-layer thermal barrier coatings odified by rare earth
Ran Wang et al.
CERAMICS INTERNATIONAL (2019)
Wetting mechanism of CMAS melt on YSZ surface at high temperature: First-principles calculation
Bingtian Li et al.
APPLIED SURFACE SCIENCE (2019)
Corrosion resistance and thermal-mechanical properties of ceramic pellets to molten calcium-magnesium-alumina-silicate (CMAS)
Huanjie Fang et al.
CERAMICS INTERNATIONAL (2019)
CMAS resistance characteristics of LaPO4/YSZ thermal barrier coatings at 1250°C-1350°C
Lei Guo et al.
CORROSION SCIENCE (2019)
CMAS penetration-induced cracking behavior in the ceramic top coat of APS TBCs
Zhenwei Cai et al.
CERAMICS INTERNATIONAL (2019)
Investigation of ternary rare earth oxide-doped YSZ and its high temperature stability
Dong Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of rare earth oxides on kinetics and reaction mechanisms in CMAS silicate melts
F. Perrudin et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Corrosion resistant plasma sprayed (Y0.8Gd0.2)3Al5O12/YSZ thermal barrier coatings towards molten calcium-magnesium-alumina-silicate
Shiyu Sun et al.
CERAMICS INTERNATIONAL (2019)
Hot corrosion behavior of BaLa2Ti3O10 exposed to calcium-magnesium-alumina-silicate at elevated temperatures
Jianxing Ye et al.
CERAMICS INTERNATIONAL (2018)
CMAS (CaO-MgO-Al2O3-SiO2) resistance of Y2O3-stabilized ZrO2 thermal barrier coatings with Pt layers
Hui Liu et al.
CERAMICS INTERNATIONAL (2018)
Phase stability and thermo-physical properties of ZrO2-CeO2-TiO2 ceramics for thermal barrier coatings
Jinshuang Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Environmental-barrier coating ceramics for resistance against attack by molten calcia-magnesia-aluminosilicate (CMAS) glass: Part II, beta-Yb2Si2O7 and beta-Sc2Si2O7
Laura R. Turcer et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Layered, composite, and doped thermal barrier coatings exposed to sand laden flows within a gas turbine engine: Microstructural evolution, mechanical properties, and CMAS deposition
Andy Nieto et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Defects/CMAS corrosion resistance relationship in plasma sprayed YPSZ coating
Y. X. Kang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Resistance of 2ZrO2•Y2O3 top coat in thermal/environmental barrier coatings to calcia-magnesia-aluminosilicate attack at 1500°C
Amanda R. Krause et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Plasma sprayed nanostructured GdPO4 thermal barrier coatings: Preparation microstructure and CMAS corrosion resistance
Lei Guo et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)
Lifetime and failure modes of plasma sprayed thermal barrier coatings in thermal gradient rig tests with simultaneous CMAS injection
Daniel E. Mack et al.
SURFACE & COATINGS TECHNOLOGY (2017)
CMAS behavior of yttrium aluminum garnet (YAG) and yttria-stabilized zirconia (YSZ) thermal barrier coatings
Rishi Kumar et al.
SURFACE & COATINGS TECHNOLOGY (2017)
High-temperature corrosion mechanism of YSZ coatings subject to calcium-magnesium-aluminosilicate (CMAS) deposits: First-principles calculations
Haizhong Zheng et al.
CORROSION SCIENCE (2017)
Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection
Tao Liu et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Thermal cycling behavior and bonding strength of single-ceramic-layer Sm2Zr2O7 and double-ceramic-layer Sm2Zr2O7/8YSZ thermal barrier coatings deposited by atmospheric plasma spraying
H. X. Wu et al.
CERAMICS INTERNATIONAL (2016)
Adsorbability and spreadability of calcium-magnesium-alumino-silicate (CMAS) on Al-modified 7YSZ thermal barrier coating
X. F. Zhang et al.
CERAMICS INTERNATIONAL (2016)
Stability, chemical bonding behavior, elastic properties and lattice thermal conductivity of molybdenum and tungsten borides under hydrostatic pressure
XiaoYu Chong et al.
CERAMICS INTERNATIONAL (2016)
Protectiveness of Pt and Gd2Zr2O7 layers on EB-PVD YSZ thermal barrier coatings against calcium-magnesium-alumina-silicate (CMAS) attack
Lu Wang et al.
CERAMICS INTERNATIONAL (2015)
Effect of processing and service conditions on the luminescence intensity of plasma sprayed (Tm3+ + Dy3+) co-doped YSZ coatings
Weize Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Oxygen vacancy induced carbon deposition at the triple phase boundary of the nickel/yttrium-stabilized zirconia (YSZ) interface
Yanxing Zhang et al.
JOURNAL OF POWER SOURCES (2014)
2ZrO2•Y2O3 Thermal Barrier Coatings Resistant to Degradation by Molten CMAS: Part I, Optical Basicity Considerations and Processing
Amanda R. Krause et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Anisotropy in elasticity and thermal conductivity of monazite-type REPO4 (RE = La, Ce, Nd, Sm, Eu and Gd) from first-principles calculations
J. Feng et al.
ACTA MATERIALIA (2013)
Composition effects of thermal barrier coating ceramics on their interaction with molten Ca-Mg-Al-silicate (CMAS) glass
Julie M. Drexler et al.
ACTA MATERIALIA (2012)
Influence of Gd2O3 and Yb2O3 Co-doping on Phase Stability, Thermo-physical Properties and Sintering of 8YSZ
Zhang Yanli et al.
CHINESE JOURNAL OF AERONAUTICS (2012)
Environmental degradation of thermal-barrier coatings by molten deposits
Carlos G. Levi et al.
MRS BULLETIN (2012)
Thermal conductivity of the gadolinium calcium silicate apatites: Effect of different point defect types
Zhixue Qu et al.
ACTA MATERIALIA (2011)
Jet Engine Coatings for Resisting Volcanic Ash Damage
Julie M. Drexler et al.
ADVANCED MATERIALS (2011)
A novel test approach for plasma-sprayed coatings tested simultaneously under CMAS and thermal gradient cycling conditions
Tanja Steinke et al.
SURFACE & COATINGS TECHNOLOGY (2010)
Thermal-gradient testing of thermal barrier coatings under simultaneous attack by molten glassy deposits and its mitigation
Julie M. Drexler et al.
SURFACE & COATINGS TECHNOLOGY (2010)
First-principles study of the relaxation and energy of bcc-Fe, fcc-Fe and AISI-304 stainless steel surfaces
Jun Yu et al.
APPLIED SURFACE SCIENCE (2009)
Infiltration-inhibiting reaction of gadolinium zirconate thermal barrier coatings with CMAS melts
Stephan Kraemer et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits
Aysegul Aygun et al.
ACTA MATERIALIA (2007)
Comparison of thermal cycling behavior of plasma-sprayed nanostructured and traditional thermal barrier coatings
Chungen Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Thermal cyclic behavior of air plasma sprayed thermal barrier coatings sprayed on stainless steel substrates
A. Nusair Khan et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Low-temperature polymorphs of ZrO2 and HfO2:: A density-functional theory study -: art. no. 144107
JE Jaffe et al.
PHYSICAL REVIEW B (2005)
Thermal barrier coating materials
David R. Clarke et al.
MATERIALS TODAY (2005)
Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents
H Hayashi et al.
SOLID STATE IONICS (2005)
A delamination mechanism for thermal barrier coatings subject to calcium-magnesium-alumino-silicate (CMAS) infiltration
C Mercer et al.
ACTA MATERIALIA (2005)
Interrelation between anharmonicity and lateral strain in quasi-isotropic polycrystalline solids
VN Belomestnykh et al.
TECHNICAL PHYSICS (2004)
Materials selection guidelines for low thermal conductivity thermal barrier coatings
DR Clarke
SURFACE & COATINGS TECHNOLOGY (2003)
Effect of point defects on the decay of the longitudinal optical mode
PG Klemens
PHYSICA B-CONDENSED MATTER (2002)
The ratcheting of compressed thermally grown thin films on ductile substrates
MY He et al.
ACTA MATERIALIA (2000)
Defect cluster formation in M2O3-doped cubic ZrO2
MO Zacate et al.
SOLID STATE IONICS (2000)