相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Assessment and prediction of concrete flow and pumping pressure in pipeline
Egor Secrieru et al.
CEMENT & CONCRETE COMPOSITES (2020)
Rheological properties of mortar containing recycled powders from construction and demolition wastes
Zhenhua Duan et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield Stress and Structural Build-Up of Fresh Concrete
Irina Ivanova et al.
MATERIALS (2020)
Anisotropic behavior in bending of 3D printed concrete reinforced with fibers
Tao Ding et al.
COMPOSITE STRUCTURES (2020)
Mechanical behavior of 3D printed mortar with recycled sand at early ages
Tao Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up
Mingxu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Hardened properties of layered 3D printed concrete with recycled sand
Tao Ding et al.
CEMENT & CONCRETE COMPOSITES (2020)
Improvement on the properties of waste glass mortar with nanomaterials
Shaodan Hou et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mix suitable for concrete 3D printing: A review
M. A. Khan
MATERIALS TODAY-PROCEEDINGS (2020)
Plastic shrinkage cracking in 3D printed concrete
Gerrit M. Moelich et al.
COMPOSITES PART B-ENGINEERING (2020)
Advanced smart concrete - A review of current progress, benefits and challenges
Natt Makul
JOURNAL OF CLEANER PRODUCTION (2020)
Inline quantification of extrudability of cementitious materials for digital construction
V. N. Nerella et al.
CEMENT & CONCRETE COMPOSITES (2019)
3D printable concrete: Mixture design and test methods
A. V. Rahul et al.
CEMENT & CONCRETE COMPOSITES (2019)
Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing
Zhixin Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rheological and harden properties of the high-thixotropy 3D printing concrete
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Rheological behavior of high volume fly ash mixtures containing micro silica for digital construction application
Biranchi Panda et al.
MATERIALS LETTERS (2019)
A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation
Ehsan Hosseini et al.
CEMENT & CONCRETE COMPOSITES (2019)
Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2019)
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Mechanical properties and deformation behaviour of early age concrete in the context of digital construction
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
How affect the pipe length of pumping circuit on concrete pumping
Kyong Pil Jang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A systematical review of 3D printable cementitious materials
Bing Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing
Venkatesh Naidu Nerella et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2019)
The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
Yu Chen et al.
MATERIALS (2019)
A 3D Printed Ready-Mixed Concrete Power Distribution Substation: Materials and Construction Technology
Guangchao Ji et al.
MATERIALS (2019)
Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development
Yu Chen et al.
APPLIED SCIENCES-BASEL (2019)
Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure
Stefan Chaves Figueiredo et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agent
Bing Lu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Additive Manufacturing Processes for Infrastructure Construction: A Review
Abhinav Bhardwaj et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Interlayer Adhesion of 3D Printed Concrete
Biranchi Panda et al.
MATERIALS (2019)
Digital Concrete: A Review
Timothy Wangler et al.
CEMENT AND CONCRETE RESEARCH (2019)
Nanosilica particles as structural buildup agents for 3D printing with Portland cement pastes
Oscar A. Mendoza Reales et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
3D concrete printing: A lower bound analytical model for buildability performance quantification
Jacques Kruger et al.
AUTOMATION IN CONSTRUCTION (2019)
Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing
Viktor Mechtcherine et al.
AUTOMATION IN CONSTRUCTION (2019)
Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
R. J. M. Wolfs et al.
CEMENT & CONCRETE COMPOSITES (2019)
A review of the current progress and application of 3D printed concrete
Jingchuan Zhang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Printability region for 3D concrete printing using slump and slump flow test
Yi Wei Daniel Tay et al.
COMPOSITES PART B-ENGINEERING (2019)
An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete
Jacques Kruger et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Measuring the thixotropy of conventional concrete: The influence of viscosity modifying agent, superplasticiser and water
John Temitope Kolawole et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction
V. N. Nerella et al.
CEMENT AND CONCRETE RESEARCH (2019)
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Guowei Ma et al.
MATERIALS LETTERS (2019)
Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing
Wu-Jian Long et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance
Michail Papachristoforou et al.
FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY (2019)
Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-ray Micro-computed Tomography
Mohamadreza Moini et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Hardened Properties of 3D Printable 'One-Part' Geopolymer for Construction Applications
Behzad Nematollahi et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
Shin Hau Bong et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing
Yu Chen et al.
FIRST RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION - DIGITAL CONCRETE 2018 (2019)
State-of-the-art of 3D printing technology of cementitious material-An emerging technique for construction
GuoWei Ma et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2018)
A critical review of preparation design and workability measurement of concrete material for largescale 3D printing
Guowei Ma et al.
FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING (2018)
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Suvash Chandra Paul et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)
A self-reinforced cementitious composite for building-scale 3D printing
Daniel G. Soltan et al.
CEMENT & CONCRETE COMPOSITES (2018)
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
R. J. M. Wolfs et al.
CEMENT AND CONCRETE RESEARCH (2018)
Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures
Siwei Ma et al.
CEMENT AND CONCRETE RESEARCH (2018)
3D printing using concrete extrusion: A roadmap for research
R. A. Buswell et al.
CEMENT AND CONCRETE RESEARCH (2018)
Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry
Delphine Marchon et al.
CEMENT AND CONCRETE RESEARCH (2018)
Rheological requirements for printable concretes
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2018)
The role of early age structural build-up in digital fabrication with concrete
Lex Reiter et al.
CEMENT AND CONCRETE RESEARCH (2018)
Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)
Ye Qian et al.
CEMENT AND CONCRETE RESEARCH (2018)
Fresh properties of a novel 3D printing concrete ink
Yu Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
Jian Hui Lim et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete
R. J. M. Wolfs et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review
Mohammad Balapour et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
A review on use of limestone powder in cement-based materials: Mechanism, hydration and microstructures
Dehui Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Printable properties of cementitious material containing copper tailings for extrusion based 3D printing
Guowei Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Sarah Al-Qutaifi et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
Da-Wang Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of surface moisture on inter-layer strength of 3D printed concrete
Jay G. Sanjayan et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Current challenges and future potential of 3D concrete printing
B. Panda et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2018)
Measurement of tensile bond strength of 3D printed geopolymer mortar
Biranchi Panda et al.
MEASUREMENT (2018)
A review of 3D concrete printing systems and materials properties: current status and future research prospects
Suvash Chandra Paul et al.
RAPID PROTOTYPING JOURNAL (2018)
Characteristics and applications of fly ash as a sustainable construction material: A state-of-the-art review
Gang Xu et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Mechanical characterization of 3D printed anisotropic cementitious material by the electromechanical transducer
Guowei Ma et al.
SMART MATERIALS AND STRUCTURES (2018)
Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
Zhijian Li et al.
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2018)
Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printing
Yiwei Weng et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials
Mingxu Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing
Hiroki Ogura et al.
MATERIALS (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
A review on effects of limestone powder on the properties of concrete
Dehui Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Prediction of reinforced concrete strength by ultrasonic velocities
Nevbahar Sabbag et al.
JOURNAL OF APPLIED GEOPHYSICS (2017)
Additive manufacturing of geopolymer for sustainable built environment
Biranchi Panda et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain
Fubing Zou et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2017)
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Biranchi Panda et al.
MATERIALS LETTERS (2017)
Use of calcium sulfoaluminate cements for setting control of 3D-printing mortars
Noura Khalil et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
3D printing trends in building and construction industry: a review
Yi Wei Daniel Tay et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Effects of sodium gluconate on early hydration and mortar performance of Portland cement-calcium aluminate cement-anhydrite binder
Xiaowei Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Babak Zareiyan et al.
AUTOMATION IN CONSTRUCTION (2017)
Classification of building systems for concrete 3D printing
R. Duballet et al.
AUTOMATION IN CONSTRUCTION (2017)
Effect of constituents on rheological properties of fresh concrete-A review
Dengwu Jiao et al.
CEMENT & CONCRETE COMPOSITES (2017)
Autogenous shrinkage of high performance concrete: A review
Linmei Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Influence of nano-SiO2 on properties of fresh and hardened high performance concrete: A state-of-the-art review
Peng Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Numerical and experimental studies of aggregate blocking in mortar extrusion
K. El Cheikh et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Study on concrete pumpability combining different laboratory tools and linkage to rheology
Egor Secrieru et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing
Pshtiwan Shakor et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Properties of 3D-printed fiber-reinforced Portland cement paste
Manuel Hambach et al.
CEMENT & CONCRETE COMPOSITES (2017)
Non-linear modeling of yield stress increase due to SCC structural build-up at rest
Thibaut Lecompte et al.
CEMENT AND CONCRETE RESEARCH (2017)
Applications of using nano material in concrete: A review
M. S. Muhd Norhasri et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
A. Perrot et al.
MATERIALS AND STRUCTURES (2016)
Evolution of strength and failure of SCC during early hydration
Linus K. Mettler et al.
CEMENT AND CONCRETE RESEARCH (2016)
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
Erdogan Ozbay et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
The thixotropic behavior of fresh cement asphalt emulsion paste
Jian Ouyang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
Freek Bos et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Simulating the behaviour of fresh concrete with the Distinct Element Method - Deriving model parameters related to the yield stress
Viktor Mechtcherine et al.
CEMENT & CONCRETE COMPOSITES (2015)
Thixotropy and structural breakdown properties of self consolidating concrete containing various supplementary cementitious materials
Reza Saleh Ahari et al.
CEMENT & CONCRETE COMPOSITES (2015)
Avoiding inaccurate interpretations of rheological measurements for cement-based materials
Olafur H. Wallevik et al.
CEMENT AND CONCRETE RESEARCH (2015)
Influence of sodium gluconate on the performance and hydration of Portland cement
Suhua Ma et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Ultrasonic evaluation of mechanical properties of concretes produced with high early strength cement
Vladimir G. Haach et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Effect of various supplementary cementitious materials on rheological properties of self-consolidating concrete
Reza Saleh Ahari et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
A review on mixture design methods for self-compacting concrete
Caijun Shi et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Mechanical properties of structures 3D printed with cementitious powders
Peng Feng et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Thixotropic behavior of self compacting concrete with different mineral admixtures
M. K. Rahman et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Influence of nano-sized highly purified magnesium alumino silicate clay on thixotropic behavior of fresh cement pastes
Zhuojun Quanji et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Numerical simulation of formwork pressure while pumping self-compacting concrete bottom-up
Serge Tichko et al.
ENGINEERING STRUCTURES (2014)
Prediction of extrusion load and liquid phase filtration during ram extrusion of high solid volume fraction pastes
H. Khelifi et al.
POWDER TECHNOLOGY (2013)
Effect of internal curing on durability-related properties of high performance concrete
Semion Zhutovsky et al.
CEMENT AND CONCRETE RESEARCH (2012)
Hardened properties of high-performance printing concrete
T. T. Le et al.
CEMENT AND CONCRETE RESEARCH (2012)
The origins of thixotropy of fresh cement pastes
N. Roussel et al.
CEMENT AND CONCRETE RESEARCH (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate
Arnoud Perrot et al.
RHEOLOGICA ACTA (2012)
Utilization of silica fume in concrete: Review of hardened properties
Rafat Siddique
RESOURCES CONSERVATION AND RECYCLING (2011)
Influence of metakaolin on the properties of mortar and concrete: A review
Rafat Siddique et al.
APPLIED CLAY SCIENCE (2009)
Effect of nano-silica on rheology and fresh properties of cement pastes and mortars
Luciano Senff et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Distinct-layer casting of SCC: The mechanical consequences of thixotropy
N. Roussel et al.
CEMENT AND CONCRETE RESEARCH (2008)
Rheological behavior of high performance concrete with mineral admixtures and their blending
Aminul Islam Laskar et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Paste extrusion through non-axisymmetric geometries: Insights gained by application of a liquid phase drainage criterion
P. J. Martin et al.
POWDER TECHNOLOGY (2006)
A thixotropy model for fresh fluid concretes: Theory, validation and applications
Nicolas Roussel
CEMENT AND CONCRETE RESEARCH (2006)
Influence of the age and drying process on pore structure and sorption isotherms of hardened cement paste
Rosa Maria Espinosa et al.
CEMENT AND CONCRETE RESEARCH (2006)
Green and early age compressive strength of extruded cement mortar monitored with compression tests and ultrasonic techniques
Thomas Voigt et al.
CEMENT AND CONCRETE RESEARCH (2006)
Influence of fly ash and its mean particle size on certain engineering properties of cement composite mortars
GY Li et al.
CEMENT AND CONCRETE RESEARCH (2005)
Fifty-cent rheometer for yield stress measurements: From slump to spreading flow
N Roussel et al.
JOURNAL OF RHEOLOGY (2005)
Rheological test methods for the characterization of extrudable cement-based materials - A review
R Alfani et al.
MATERIALS AND STRUCTURES (2005)
Automated construction by contour crafting - related robotics and information technologies
B Khoshnevis
AUTOMATION IN CONSTRUCTION (2004)
The influence of mineral admixtures on the theology of cement paste and concrete
CF Ferraris et al.
CEMENT AND CONCRETE RESEARCH (2001)
分享论文
